Hurry and vote!!!!

General Yo-Yo
1

Hurry and vote I’m getting one of them tomorrow and i don’t care which one I get. I just want your opinions.

2

Mo-Tu!
Manufacturer YoYoJam

Shape Butterfly / Wing

Weight (g) 66.90
Width (mm) 35.32
Diameter (mm) 48.87
Gap Width (mm) 3.83
Bearing Size (Inside x Outside x Width) 6x13x5
Gap Type Adjustable
Stock Response System YYJ Double O-Ring

Mini Motrix

Manufacturer YoYoJam
Shape Butterfly / Wing

Weight (g) 64.50
Width (mm) 32.22
Diameter (mm) 52.54
Gap Width (mm) 3.59
Bearing Size (Inside x Outside x Width) 6x13x5
Gap Type Adjustable
Stock Response System YYJ Double O-Ring

Thanks to YYN

3

I want to get spacers and silicone with. Which ones should I use?

4

You want to buy silicone?

http://www.yoyonation.com/product.php?productid=16234&cat=0&page=1

Shims

http://www.yoyonation.com/product.php?productid=16237&cat=0&page=1

I would go with these shims-not too big gap not to small- its great

5

In my opinion, red and/or gray YYJ shims should be fine.

6

I would say the Mini-Motu. It weighs more, and has more rim weight, giving it more spin, has a better gap, its also smaller, so can be better for tricks. Also, it is made after the Motrixx, so its more modern.

I suggest metal shims:
http://www.yoyonation.com/product.php?productid=16237&cat=0&page=1

Or:
http://www.yoyonation.com/product.php?productid=16238&cat=0&page=1

Use this silicone:
http://www.yoyonation.com/product.php?productid=16234&cat=0&page=1
Have Fun Throwing,
~Samad

7

No offence- Did i just say that in my last 2 posts?  ;D

8

In the second post about the shims does it come with the kk bearing.

9

No they are just saying that it can replace kk for the unresponsive factor for a cheaper price- you will not get a kk! ;D

10

Does the MoTu have a large bearing?

11

http://www.yoyonation.com/product_detailed_images.php?productid=16174

I would assume it is a Large YYJ size c bearing

12

No, it has a metric bearing (6x13x5 mm).

13

What size dorothy or kk can i fit on it?

14

Here is the KK

http://www.yoyonation.com/product.php?productid=16408&cat=0&page=1

15

Yes it is. Therefore, you can replace it with any bearing of Size “C”.
If you want to replace it, I suggest the following in this particular order from best to least. (In My opinion.)
10Ball Bearing: Unfortunately, the link was taken away :frowning:
KonKave bearing: http://www.yoyonation.com/product.php?productid=16408&cat=259&page=1
SPEC bearing: http://www.yoyonation.com/product.php?productid=16799&cat=259&page=1
Dorothy Bearing: http://www.yoyonation.com/product.php?productid=16400&cat=0&page=1

Have Fun Throwing,
~Samad

16

There really is no reason to change bearings unless the stock one locks up. Stock bearings usually work fine.

17

All I can say since the rest seem to have you covored is: that a Motrixx is retired and a MoTu is not. (as far as I know.)