How I mod my Deep State (and other yo’s)

So here comes what is bound to be the first of at least a few retractions. I just remembered that the Deeper State does not have Side Effects on it. Which is going to change slightly, the method needed to achieve the final goal. However, even if upon receiving the deeper state, I find out that it cannot be modded in this way, I do have another Deep State that I am wanting to MOD so I will make the Thread about that. Here are pics of my “already” modified Deep State. The axle was trimmed with Dremel making sure to bevel the edges for smooth assembly. The axle is held in place by Loctite or some similar type adhesive and that is why I chose to trim the axle. I was concerned about marring the Side Effect if I tried to remove the axle, and it didn’t need much trimmed so I figured going with the next size down would be removing too much axle. Since I left the axle in I had to trim the non-axle Side Effect on the bearing seat in order to allow them to screw together a tad closer. Also I’ve made shims out of hardware store brass washers. All of the details, tools, and method for the Deep State will be applied to another Deep State I’m modding and I’ll follow the process here. Also going to see how this applies to the Deeper State as well. That’s all for today. Thanks for tuning in!!




5 Likes