# YYJ O-Rings and Caps
**URL:** https://forums.yoyoexpert.com/t/yyj-o-rings-and-caps/15941
**Category:** General Yo-Yo
**Created:** [June 25, 2010, 12:26am UTC](https://forums.yoyoexpert.com/t/yyj-o-rings-and-caps/15941 "2010-06-25T00:26:58Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@XLazyThrowerX](https://forums.yoyoexpert.com/u/XLazyThrowerX)
#### Post date: [June 25, 2010, 12:26am UTC](https://forums.yoyoexpert.com/t/yyj-o-rings-and-caps/15941/1 "2010-06-25T00:26:58Z")
I have a YYJ Mini Mo-Tu with 888 size K pads in it. Will 888 size pads also fit in a Lyn Fury? Also, related to the response, are all YYJ O-Rings the same size? In addition to this, is there an easier way to remove YYJ caps. I know this has been asked a million times. I used the search bar and found I could use a suction cup and duct tape. I have tried both for 30 minutes each. But to no avail. I am using a Nerf Dart suction cup. So can anyone help? Thanks. :wink:
---
### Author:  [@Troy\_oyo](https://forums.yoyoexpert.com/u/Troy_oyo)
#### Post date: [June 25, 2010, 12:32am UTC](https://forums.yoyoexpert.com/t/yyj-o-rings-and-caps/15941/2 "2010-06-25T00:32:45Z")
Try using a more powerful suction cup, i used a suction cup from a window ornament and it worked great. I dont know if a nerf one has enough oomph to get it. All O-rings should be the same size. I should note however that the o-rings from my lyn fury did not fit my New Breed. As for the 888 pads in the Lyn fury, give it a try, what do you have to lose really?
---
### Author:  [@XLazyThrowerX](https://forums.yoyoexpert.com/u/XLazyThrowerX)
#### Post date: [June 25, 2010, 12:36am UTC](https://forums.yoyoexpert.com/t/yyj-o-rings-and-caps/15941/3 "2010-06-25T00:36:38Z")
Yeah, Thank you. I think I am going to get the 888 size because I have the other 2 sizes. Also, do you know where I could get a more powerful suction cup? Thanks. :wink:
---
### Author:  [@EvanW](https://forums.yoyoexpert.com/u/EvanW)
#### Post date: [June 25, 2010, 12:45am UTC](https://forums.yoyoexpert.com/t/yyj-o-rings-and-caps/15941/4 "2010-06-25T00:45:39Z")
You could probably get a suction cup down at your local hardware store
---
### Author:  [@anonyo](https://forums.yoyoexpert.com/u/anonyo)
#### Post date: [June 25, 2010, 12:55am UTC](https://forums.yoyoexpert.com/t/yyj-o-rings-and-caps/15941/5 "2010-06-25T00:55:04Z")
to get the caps off my journey i used suction cups made to hold christmas ornaments.
i’m sure your local home depot has something like these
[http://www.homedepot.com/h\_d1/N-5yc1vZ1xkd/R-100212757/h\_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053](http://www.homedepot.com/h_d1/N-5yc1vZ1xkd/R-100212757/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053)
---
### Author:  [@XLazyThrowerX](https://forums.yoyoexpert.com/u/XLazyThrowerX)
#### Post date: [June 25, 2010, 1:02am UTC](https://forums.yoyoexpert.com/t/yyj-o-rings-and-caps/15941/6 "2010-06-25T01:02:24Z")
Well, thank you all. I now know what to do. Thanks. :wink: