# YYF Spin time

**URL:** https://forums.yoyoexpert.com/t/yyf-spin-time/318780
**Category:** General Yo-Yo
**Created:** [April 23, 2020, 1:46pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780 "2020-04-23T13:46:11Z")
**Posts on this page:** 20
**Page:** 3

<div class="post-metadata">

### Author: ![Z\_Car](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/z_car/32/72879_2.png) [@Z\_Car](https://forums.yoyoexpert.com/u/Z_Car)
#### Post date: [April 24, 2020, 7:50am UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/42 "2020-04-24T07:50:15Z")

</div>

Sounds like you may need to either break in your bearings or clean them. Gunked up or to much oil

---

<div class="post-metadata">

### Author: ![BlakeyTHEHAMMER](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/blakeythehammer/32/104963_2.png) [@BlakeyTHEHAMMER](https://forums.yoyoexpert.com/u/BlakeyTHEHAMMER)
#### Post date: [April 25, 2020, 4:15pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/43 "2020-04-25T16:15:20Z")

</div>

Pay attention to the noise the barring is making. If there is no to little sound, then it’s probably a problem with the bearing. If it rings slightly then you’re good. I got my horizon to sleep for 4:30 on a good throw with no tricks. Sometimes it’s the technique, the more you practice the better you get at not causing the strings to touch the sides of the yo-yo. Hope this helps man, I feel your pain. Same thing happened to my shutter wide angle :”””(

---

<div class="post-metadata">

### Author: ![Palli](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/palli/32/105_2.png) [@Palli](https://forums.yoyoexpert.com/u/Palli)
#### Post date: [April 25, 2020, 5:55pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/44 "2020-04-25T17:55:44Z")

</div>

Everytime I see a post on spin times I just get the urge to do a long sleeper challenge.

Hit 16min 30sec first try on my Rvk.Rt Mjolnir prototype.

---

<div class="post-metadata">

### Author: ![Apple](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@Apple](https://forums.yoyoexpert.com/u/Apple)
#### Post date: [April 26, 2020, 2:16am UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/45 "2020-04-26T02:16:54Z")

</div>

> [@Z\_Car](#):
>
> break in your bearings or clean them.

brand new bearing…brand new yoyos; Throw’s N Brews was saying they don’t need to be broken in. How do I break them in?

---

<div class="post-metadata">

### Author: ![ChrisFrancz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/chrisfrancz/32/48992_2.png) [@ChrisFrancz](https://forums.yoyoexpert.com/u/ChrisFrancz)
#### Post date: [April 26, 2020, 2:50am UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/46 "2020-04-26T02:50:43Z")

</div>

The new yoyo sat around in the package for maybe a year until you got it. Things just settle and need to be used a little. That’s at least my understanding. Oh, and like a new car - I heard after so many miles it gets broken in and up to optimal performance. Or a runner doing stretches before a race. Or that one time I exercised a few years ago…it took me 2 sit-ups to warm up enough to finish my 5 sit-up workout. Sorry, I’m probably not helping.

---

<div class="post-metadata">

### Author: ![Blimpin](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/blimpin/32/80496_2.png) [@Blimpin](https://forums.yoyoexpert.com/u/Blimpin)
#### Post date: [April 26, 2020, 3:38am UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/47 "2020-04-26T03:38:45Z")

</div>

Gave me a kick 😆

---

<div class="post-metadata">

### Author: ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [April 26, 2020, 5:16am UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/48 "2020-04-26T05:16:27Z")

</div>

> [@Apple](#):
>
> brand new bearing…brand new yoyos; … How do I break them in?

Play them. That usually works fairly well. Or so I’ve heard. :wink:

---

<div class="post-metadata">

### Author: ![Apple](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@Apple](https://forums.yoyoexpert.com/u/Apple)
#### Post date: [April 26, 2020, 3:04pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/49 "2020-04-26T15:04:05Z")

</div>

> [@jhb8426](#):
>
> Play them. That usually works fairly well. Or so I’ve heard.

lol!

So um, how does the process work? Some kind of stress on the yoyo and bearning or something? What parts of the bearing or yoyo? Is the bearing seat effected? I’m just looking for more information. How will I know when It’s broken in?

---

<div class="post-metadata">

### Author: ![Apple](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@Apple](https://forums.yoyoexpert.com/u/Apple)
#### Post date: [April 26, 2020, 3:05pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/50 "2020-04-26T15:05:07Z")

</div>

> [@ChrisFrancz](#):
>
> The new yoyo sat around in the package for maybe a year until you got it. Things just settle and need to be used a little. That’s at least my understanding. Oh, and like a new car - I heard after so many miles it gets broken in and up to optimal performance. Or a runner doing stretches before a race. Or that one time I exercised a few years ago…it took me 2 sit-ups to warm up enough to finish my 5 sit-up workout. Sorry, I’m probably not helping.

That’s good, i’m just wondering what happens during the breaking in process to make the devices more playable.

---

<div class="post-metadata">

### Author: ![Apple](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@Apple](https://forums.yoyoexpert.com/u/Apple)
#### Post date: [April 26, 2020, 3:08pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/51 "2020-04-26T15:08:44Z")

</div>

Perhaps this is more clearly stated: what happens to the yoyo during the break in process, physically.?

---

<div class="post-metadata">

### Author: ![yyfben2.deactivated](https://avatars.discourse-cdn.com/v4/letter/y/ccd318/32.png) [@yyfben2.deactivated](https://forums.yoyoexpert.com/u/yyfben2.deactivated)
#### Post date: [April 26, 2020, 3:11pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/52 "2020-04-26T15:11:51Z")

</div>

I hit 10min in a shutter and edge beyond. BiND would be my choice tho if I had to battle boredom and others in a long sleeper contest

---

<div class="post-metadata">

### Author: ![ChrisFrancz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/chrisfrancz/32/48992_2.png) [@ChrisFrancz](https://forums.yoyoexpert.com/u/ChrisFrancz)
#### Post date: [April 26, 2020, 3:19pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/53 "2020-04-26T15:19:44Z")

</div>

My theory: After a new yoyo is packaged it will sit for maybe months or even a year. The bearing and little balls inside which are meant to be in motion just sit still. Bearings are lubed in the factory but when the bearing just sits still for a period of time they need a little throwing time to “warm up” and get moving how they were meant to move. A lot of yoyo reviewers when they do an unboxing and play a yoyo for the first time will sometimes say “the bearings just need to be broken in.”

---

<div class="post-metadata">

### Author: ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [April 26, 2020, 5:04pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/54 "2020-04-26T17:04:17Z")

</div>

> [@Apple](#):
>
> > [@jhb8426](#):
> >
> > Play them. That usually works fairly well. Or so I’ve heard.
> 
> lol!
> 
> So um, how does the process work?..

When new the parts (balls, races etc) fit relatively tightly (so to speak). As you play the surfaces wear slightly and things loosen up, tolerances get looser etc. The bearing seat is generally not affected and doesn’t have much influence on spin in any event.

---

<div class="post-metadata">

### Author: ![Exmime](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/exmime/32/40143_2.png) [@Exmime](https://forums.yoyoexpert.com/u/Exmime)
#### Post date: [April 27, 2020, 3:04pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/55 "2020-04-27T15:04:41Z")

</div>

Do GYROSCOPIC FLOP for a 1/2 an hour and it should start to loosen up.

[![]( " - YouTube") ](https://www.youtube.com/watch?v=F4ZHA9Y0mVw)

---

<div class="post-metadata">

### Author: ![Apple](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@Apple](https://forums.yoyoexpert.com/u/Apple)
#### Post date: [April 27, 2020, 3:56pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/56 "2020-04-27T15:56:29Z")

</div>

Interesting… what’s to be loosened up, ~~bearing, yoyo? both?~~

the whole shebang got it

---

<div class="post-metadata">

### Author: ![yoyo-matt-ratt](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyo-matt-ratt/32/69567_2.png) [@yoyo-matt-ratt](https://forums.yoyoexpert.com/u/yoyo-matt-ratt)
#### Post date: [April 27, 2020, 4:00pm UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/57 "2020-04-27T16:00:53Z")

</div>

my poly edge spins for about 3-3.5 minutes, try twisting the string to adjust tilt?

---

<div class="post-metadata">

### Author: ![skitrz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/skitrz/32/849_2.png) [@skitrz](https://forums.yoyoexpert.com/u/skitrz)
#### Post date: [April 29, 2020, 2:21am UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/58 "2020-04-29T02:21:21Z")

</div>

Want more spin time? Pump some weight. Clean the bearing. Pump some weight. Don’t lube the bearing. Pump some weight. Place the string on the yoyo. Pump some weight. Wind the string around the yoyo. Pump some weight. Put the loop around your finger. Pump some weight…no wait you can’t pump weight with the yoyo ready to go in your hand! Look at your 💪 , massive it now is after all the pumping. Throw the yoyo, hard. No, **harder**! If this doesn’t work, practice doing sleepers on a fixed axel and pump weight to improve your 💪 . Nuttin to it!

(btw: protein and energy drinks may help)

---

<div class="post-metadata">

### Author: ![hobbygod](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hobbygod/32/120997_2.png) [@hobbygod](https://forums.yoyoexpert.com/u/hobbygod)
#### Post date: [April 29, 2020, 2:46am UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/59 "2020-04-29T02:46:42Z")

</div>

This is probably why I never have problems with spin time lol

---

<div class="post-metadata">

### Author: ![skitrz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/skitrz/32/849_2.png) [@skitrz](https://forums.yoyoexpert.com/u/skitrz)
#### Post date: [April 29, 2020, 3:17am UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/60 "2020-04-29T03:17:11Z")

</div>

The 💪 , protein shakes, or energy drinks? Please specify. Fixed axle practice or pumpin dem weights?

---

<div class="post-metadata">

### Author: ![hobbygod](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hobbygod/32/120997_2.png) [@hobbygod](https://forums.yoyoexpert.com/u/hobbygod)
#### Post date: [April 29, 2020, 3:21am UTC](https://forums.yoyoexpert.com/t/yyf-spin-time/318780/61 "2020-04-29T03:21:53Z")

</div>

Lifting :joy::joy:

[Previous page](https://forums.yoyoexpert.com/t/yyf-spin-time/318780.md?page=2)

[Next page](https://forums.yoyoexpert.com/t/yyf-spin-time/318780.md?page=4)
