# YYF Onestar Issue
**URL:** https://forums.yoyoexpert.com/t/yyf-onestar-issue/72730
**Category:** General Yo-Yo
**Created:** [February 17, 2015, 2:50pm UTC](https://forums.yoyoexpert.com/t/yyf-onestar-issue/72730 "2015-02-17T14:50:04Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@theappe](https://forums.yoyoexpert.com/u/theappe)
#### Post date: [February 17, 2015, 2:50pm UTC](https://forums.yoyoexpert.com/t/yyf-onestar-issue/72730/1 "2015-02-17T14:50:04Z")
Hey,
I’m having this issue with a Onestar where the string is going in between the bearing the the yoyo itself. Yoyo is screwed on correctly and bearing is sitting correctly, but there is just a gap there where the string goes in when I throw. Makes the yoyo unplayable.
Any suggestions?
---
### Author:  [@LeDave](https://forums.yoyoexpert.com/u/LeDave)
#### Post date: [February 17, 2015, 2:57pm UTC](https://forums.yoyoexpert.com/t/yyf-onestar-issue/72730/2 "2015-02-17T14:57:48Z")
Are you using a larger bearing or a smaller one? If you are using a smaller one, that could be why.
---
### Author:  [@theappe](https://forums.yoyoexpert.com/u/theappe)
#### Post date: [February 17, 2015, 2:59pm UTC](https://forums.yoyoexpert.com/t/yyf-onestar-issue/72730/3 "2015-02-17T14:59:23Z")
> [@LeDave](#):
>
> Are you using a larger bearing or a smaller one? If you are using a smaller one, that could be why.
C bearing (large)
---
### Author:  [@LeDave](https://forums.yoyoexpert.com/u/LeDave)
#### Post date: [February 17, 2015, 3:07pm UTC](https://forums.yoyoexpert.com/t/yyf-onestar-issue/72730/4 "2015-02-17T15:07:36Z")
Hmm that is strange. I’ve never heard of this problem before.
---
### Author:  [@theappe](https://forums.yoyoexpert.com/u/theappe)
#### Post date: [February 17, 2015, 3:18pm UTC](https://forums.yoyoexpert.com/t/yyf-onestar-issue/72730/5 "2015-02-17T15:18:55Z")
> [@LeDave](#):
>
> Hmm that is strange. I’ve never heard of this problem before.
I’ve never heard or experienced this problem either, but it happens consistently where it wasn’t a one time thing.
---
### Author:  [@rdz](https://forums.yoyoexpert.com/u/rdz)
#### Post date: [February 17, 2015, 3:43pm UTC](https://forums.yoyoexpert.com/t/yyf-onestar-issue/72730/6 "2015-02-17T15:43:35Z")
did you switch the bearing? if you tried switching the yyf out that could be the problem. yyf bearings are flat all the way to the edge and a yyj or one drop bearing has a slight curb down at the end. same thing happened to me years back
---
### Author:  [@theappe](https://forums.yoyoexpert.com/u/theappe)
#### Post date: [February 18, 2015, 1:56pm UTC](https://forums.yoyoexpert.com/t/yyf-onestar-issue/72730/7 "2015-02-18T13:56:48Z")
> [@rdz](#):
>
> did you switch the bearing? if you tried switching the yyf out that could be the problem. yyf bearings are flat all the way to the edge and a yyj or one drop bearing has a slight curb down at the end. same thing happened to me years back
This was it. I looked at the bearing that it had it the end was slightly curved. Threw in a completely flat bearing and it took care of the issue.
Thanks for the suggestion.