# Yuuksta screw problem

**URL:** <https://forums.yoyoexpert.com/t/yuuksta-screw-problem/21323>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [November 29, 2010, 2:00am UTC](https://forums.yoyoexpert.com/t/yuuksta-screw-problem/21323 "2010-11-29T02:00:50Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![yoyonut](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyonut/32/611_2.png) [@yoyonut](https://forums.yoyoexpert.com/u/yoyonut)\
**Post date:** [November 29, 2010, 2:00am UTC](https://forums.yoyoexpert.com/t/yuuksta-screw-problem/21323/1 "2010-11-29T02:00:50Z")

</div>

I have a Yuuksta, and it is a great yoyo, but whenever i get a snag and unscrew it, the actual screw comes off and i have to screw it back in. Also, i think this may be the reason why it sometimes unscrews in play. Solutions?

---

<div class="post-metadata">

**Author:** ![d4rqk0n3](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/d4rqk0n3/32/411_2.png) [@d4rqk0n3](https://forums.yoyoexpert.com/u/d4rqk0n3)\
**Post date:** [November 29, 2010, 2:25am UTC](https://forums.yoyoexpert.com/t/yuuksta-screw-problem/21323/2 "2010-11-29T02:25:44Z")

</div>

Teflon Thread Tape, or if you can get your hands on it, some Threadlock. Just remember that if you want to ever pull out the axle it is going to be hard to do so. Hope this helps 😃

---

<div class="post-metadata">

**Author:** ![x52](https://avatars.discourse-cdn.com/v4/letter/x/3bc359/32.png) [@x52](https://forums.yoyoexpert.com/u/x52)\
**Post date:** [November 29, 2010, 3:37am UTC](https://forums.yoyoexpert.com/t/yuuksta-screw-problem/21323/3 "2010-11-29T03:37:50Z")

</div>

Well sometimes they just tend to unscrew like that. There’s nothing wrong, just screw it back in more than before, and if not I would just ignore it. It’s not effecting play or making it weird, so it should be fine.

---

<div class="post-metadata">

**Author:** ![arem250](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/arem250/32/7922_2.png) [@arem250](https://forums.yoyoexpert.com/u/arem250)\
**Post date:** [November 29, 2010, 3:55am UTC](https://forums.yoyoexpert.com/t/yuuksta-screw-problem/21323/4 "2010-11-29T03:55:39Z")

</div>

Same happened to me and all I did was put some Threadlock on one side and now it hasn’t come out yet.

---

<div class="post-metadata">

**Author:** ![x52](https://avatars.discourse-cdn.com/v4/letter/x/3bc359/32.png) [@x52](https://forums.yoyoexpert.com/u/x52)\
**Post date:** [November 29, 2010, 3:59am UTC](https://forums.yoyoexpert.com/t/yuuksta-screw-problem/21323/5 "2010-11-29T03:59:43Z")

</div>

I think it’s just to leave it alone IMO.