# YoYoJam Silicone O-Ring Question

**URL:** <https://forums.yoyoexpert.com/t/yoyojam-silicone-o-ring-question/930>\
**Category:** General Yo-Yo\
**Created:** [March 8, 2009, 3:59pm UTC](https://forums.yoyoexpert.com/t/yoyojam-silicone-o-ring-question/930 "2009-03-08T15:59:31Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![saintrobyn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/saintrobyn/32/54_2.png) [@saintrobyn](https://forums.yoyoexpert.com/u/saintrobyn)\
**Post date:** [March 8, 2009, 3:59pm UTC](https://forums.yoyoexpert.com/t/yoyojam-silicone-o-ring-question/930/1 "2009-03-08T15:59:31Z")

</div>

I have a Lyn Fury that I am quite fond of that has the standard YoYoJam double o-ring response system in it. If I replaces the stock response system with a pair of YoYoJam silicone o-rings what sort of differences would I see in the play of my yo-yo? I have never messed with silicone before and figure this would be a good introduction to it without having to mess with flowable. On a related note, does anyone know if these sit flush in the groove of the yo-yo or if they will protrude like the stock o-rings?

---

<div class="post-metadata">

**Author:** ![Mage1342](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mage1342/32/75_2.png) [@Mage1342](https://forums.yoyoexpert.com/u/Mage1342)\
**Post date:** [March 8, 2009, 4:14pm UTC](https://forums.yoyoexpert.com/t/yoyojam-silicone-o-ring-question/930/2 "2009-03-08T16:14:28Z")

</div>

OK. The silicone allows for a more unresponsive type of play without slowing the yoyo down. Also, you will probably have to bind return for it to come back. Also, it is a great introduction to silicone because its simple and to the point. And the silicone should sit flush in the groove and not protrude like the o-rings.

I hope this helps! If you need a more exact answer tell me!

---

<div class="post-metadata">

**Author:** ![saintrobyn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/saintrobyn/32/54_2.png) [@saintrobyn](https://forums.yoyoexpert.com/u/saintrobyn)\
**Post date:** [March 8, 2009, 4:24pm UTC](https://forums.yoyoexpert.com/t/yoyojam-silicone-o-ring-question/930/3 "2009-03-08T16:24:36Z")

</div>

That helps quite a bit, thanks. I have my Lyn set to play unresponsive and I know how to bind so maybe a I should give a set of these a shot.

---

<div class="post-metadata">

**Author:** ![Mage1342](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mage1342/32/75_2.png) [@Mage1342](https://forums.yoyoexpert.com/u/Mage1342)\
**Post date:** [March 8, 2009, 4:39pm UTC](https://forums.yoyoexpert.com/t/yoyojam-silicone-o-ring-question/930/4 "2009-03-08T16:39:08Z")

</div>

No problem! I hope you like them! They will most likely fit the o-ring cavity.

---

<div class="post-metadata">

**Author:** ![EvanB](https://avatars.discourse-cdn.com/v4/letter/e/90ced4/32.png) [@EvanB](https://forums.yoyoexpert.com/u/EvanB)\
**Post date:** [March 8, 2009, 5:21pm UTC](https://forums.yoyoexpert.com/t/yoyojam-silicone-o-ring-question/930/5 "2009-03-08T17:21:09Z")

</div>

Would these pads fill a Black Knight cavity? I would assume so because it says most YYJs but I just want to be sure.

---

<div class="post-metadata">

**Author:** ![Mage1342](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mage1342/32/75_2.png) [@Mage1342](https://forums.yoyoexpert.com/u/Mage1342)\
**Post date:** [March 8, 2009, 5:23pm UTC](https://forums.yoyoexpert.com/t/yoyojam-silicone-o-ring-question/930/6 "2009-03-08T17:23:51Z")

</div>

Im sure they would. ;D I bet they will.