# Yoyo CAD & Prototyping Adventures

**URL:** <https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [August 7, 2018, 3:40pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547 "2018-08-07T15:40:59Z")\
**Posts on this page:** 20\
**Page:** 70

<div class="post-metadata">

**Author:** ![AtomicChessGuy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atomicchessguy/32/606394_2.png) [@AtomicChessGuy](https://forums.yoyoexpert.com/u/AtomicChessGuy)\
**Post date:** [April 2, 2024, 3:41pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1408 "2024-04-02T15:41:58Z")

</div>

Alright thanks!

---

<div class="post-metadata">

**Author:** ![AtomicChessGuy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atomicchessguy/32/606394_2.png) [@AtomicChessGuy](https://forums.yoyoexpert.com/u/AtomicChessGuy)\
**Post date:** [April 4, 2024, 3:22am UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1410 "2024-04-04T03:22:02Z")

</div>

Made a new yo-yo.  
Thoughts anyone?

 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/b/d/e/bde41a0cb1f6f5f21c850ae77a5517a712090748.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/b/6/3/b63456d14a105ae52a5bb457044a853409a5578c.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/8/4/c/84c103ebbf92b5361b6ecdc06842fd390e462b8b.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/7/f/e/7fe993ad1a35c7ab652c54e2b9f06ad81e8efce9.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/e/3/ce32b33d97859c076cb1074ffce0a03fc87d4185.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/6/c/2/6c2d3a02c98539a31adf4edbd0334ed3c001edba.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/1/4/6/14650c7a58c8d761219dec0b3a0cfec8aacdff1a.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/0/9/4/094eb6f0f59201965aa465a66e6efe909a1ee3e0.jpeg)  
Specs:  
Width: 49 mm  
Diameter: 57 mm  
Half Weight: 32.66 grams  
MMOI: 17094

Is the axle hole the proper size for an eight mm axle? I also wish it were a little bit lighter from 31.5 to 32 grams but I don’t want to bring the MMOI down to under 17000 so I’m a bit conflicted.

---

<div class="post-metadata">

**Author:** ![anon5341354](https://avatars.discourse-cdn.com/v4/letter/a/3ab097/32.png) [@anon5341354](https://forums.yoyoexpert.com/u/anon5341354)\
**Post date:** [April 4, 2024, 9:36am UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1411 "2024-04-04T09:36:12Z")

</div>

> [@MarkD](#):
>
> Yeah, looks better. I echo Glen’s comments, though this looks like a 66g assembled design to me (31.5 \* 2 + 3)

My bad, I sometimes accidently add in the weight of Cabal guts bearing seats in the equation.

---

<div class="post-metadata">

**Author:** ![AtomicChessGuy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atomicchessguy/32/606394_2.png) [@AtomicChessGuy](https://forums.yoyoexpert.com/u/AtomicChessGuy)\
**Post date:** [April 4, 2024, 2:04pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1412 "2024-04-04T14:04:21Z")

</div>

That’s okay. What do you think of the new yo-yo I made? And is the axle hole length the proper size for an 8mm axle?

---

<div class="post-metadata">

**Author:** ![crackout](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crackout/32/44608_2.png) [@crackout](https://forums.yoyoexpert.com/u/crackout)\
**Post date:** [April 4, 2024, 4:24pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1413 "2024-04-04T16:24:44Z")

</div>

> [@AtomicChessGuy](#):
>
> ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/8/4/c/84c103ebbf92b5361b6ecdc06842fd390e462b8b.jpeg)

No critisism, just a thought: How about some more originality in the profile shape? This is basically a Klondike, Wild, Papercut, etc. We have lots of those floating around these days.

---

<div class="post-metadata">

**Author:** ![AtomicChessGuy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atomicchessguy/32/606394_2.png) [@AtomicChessGuy](https://forums.yoyoexpert.com/u/AtomicChessGuy)\
**Post date:** [April 4, 2024, 4:27pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1414 "2024-04-04T16:27:36Z")

</div>

@crackout  
Is it? Okay, I don’t look at other yoyos that much. I just looked at the ones you mentioned and I see what you mean. This was kind of a base of the cheatcode though. I’m going to make another yoyo and I want it to be unique in some way. What kind of shape/ unique quality would you suggest?

---

<div class="post-metadata">

**Author:** ![crackout](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crackout/32/44608_2.png) [@crackout](https://forums.yoyoexpert.com/u/crackout)\
**Post date:** [April 4, 2024, 4:31pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1415 "2024-04-04T16:31:06Z")

</div>

Don’t get me wrong, this shape has proven to perform well. If your goal is to create a yoyo that profits from that field experience, you are on target.

If you want to create a style for a possible brand or something unique in general, you may want to reconsider.

---

<div class="post-metadata">

**Author:** ![AtomicChessGuy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atomicchessguy/32/606394_2.png) [@AtomicChessGuy](https://forums.yoyoexpert.com/u/AtomicChessGuy)\
**Post date:** [April 4, 2024, 4:33pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1416 "2024-04-04T16:33:15Z")

</div>

@crackout  
Okay, thanks for the advice! In the future I might try to sell yoyos I design but I think right now I am just getting experience. Is there anything you would like to see on a yoyo that you haven’t seen before or is cool that I might be able to design? Also I love your cat in your profile picture!

---

<div class="post-metadata">

**Author:** ![crackout](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crackout/32/44608_2.png) [@crackout](https://forums.yoyoexpert.com/u/crackout)\
**Post date:** [April 4, 2024, 4:35pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1417 "2024-04-04T16:35:36Z")

</div>

> [@AtomicChessGuy](#):
>
> Is there anything you would like to see on a yoyo that you haven’t seen before or is cool that I might be able to design?

Much appreciated, but I [handle these urges myself](https://forums.yoyoexpert.com/t/ilyy-numen-released/314359/217). :wink:

---

<div class="post-metadata">

**Author:** ![AtomicChessGuy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atomicchessguy/32/606394_2.png) [@AtomicChessGuy](https://forums.yoyoexpert.com/u/AtomicChessGuy)\
**Post date:** [April 4, 2024, 4:36pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1418 "2024-04-04T16:36:18Z")

</div>

Ah, I see. Well thanks anyway!

---

<div class="post-metadata">

**Author:** ![MarkD](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/markd/32/40845_2.png) [@MarkD](https://forums.yoyoexpert.com/u/MarkD)\
**Post date:** [April 4, 2024, 8:29pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1419 "2024-04-04T20:29:33Z")

</div>

> [@AtomicChessGuy](#):
>
> I think right now I am just getting experience.

This design is perfectly fine and you can move on to the next project!  
The very fine details are only particularly important if you have a design you are planning on prototyping/starting a business with, IMO

---

<div class="post-metadata">

**Author:** ![AtomicChessGuy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atomicchessguy/32/606394_2.png) [@AtomicChessGuy](https://forums.yoyoexpert.com/u/AtomicChessGuy)\
**Post date:** [April 5, 2024, 5:38pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1420 "2024-04-05T17:38:26Z")

</div>

![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/6/a/4/6a494e5956a9d35adcc61672bee9c46e567a5025.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/2/d/2/2d2954f7908e836818cd7bac8d1d02f263c4bb83.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/6/f/c6f8df17d8cf7256ad7dcdcd2583567be2188e58.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/0/9/e/09e490c536bad4e717614d4689dc6557fa60b082.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/9/5/c9595ff92433e49d6204b4adc8642b123766e713.jpeg)  
I made a plastic yoyo. Was a lot trickier than I thought and the dimensions are kind of extreme. Thoughts anyone?

Specs:  
Width: 52 mm  
Diameter: 64 mm  
Half Weight: 27 grams  
Material: Polycarbonate Plastic  
MMOI: 16957

When I change the material to Delrin though I get a half weight of 30 grams and an MMOI of 19322.

---

<div class="post-metadata">

**Author:** ![AtomicChessGuy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atomicchessguy/32/606394_2.png) [@AtomicChessGuy](https://forums.yoyoexpert.com/u/AtomicChessGuy)\
**Post date:** [April 6, 2024, 1:51am UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1422 "2024-04-06T01:51:08Z")

</div>

I’ve been thinking about designing a bimetal yoyo. Is there anything I need to know before I do? I’m not quite sure how to integrate the steel with the aluminum. Can anyone elaborate?

---

<div class="post-metadata">

**Author:** ![MarkD](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/markd/32/40845_2.png) [@MarkD](https://forums.yoyoexpert.com/u/MarkD)\
**Post date:** [April 7, 2024, 7:26pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1423 "2024-04-07T19:26:11Z")

</div>

> [@AtomicChessGuy](#):
>
> I made a plastic yoyo. Was a lot trickier than I thought and the dimensions are kind of extreme. Thoughts anyone?

You won’t be able to drive the axle directly into plastic here like you can on a metal yoyo. Plastics need some way of pressing everything together that has metal threads. You can use hub/spacer, overmolded hub, bolt/nut, etc.

---

<div class="post-metadata">

**Author:** ![MarkD](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/markd/32/40845_2.png) [@MarkD](https://forums.yoyoexpert.com/u/MarkD)\
**Post date:** [April 7, 2024, 7:26pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1424 "2024-04-07T19:26:44Z")

</div>

https://www.youtube.com/embed/AujdkIvf2sU?feature=oembed&wmode=opaque&list=PLWmlUBMq1m9eKpMDYjLmfK-D2YlKGBSbb  
I talk about steel rings in this video.

---

<div class="post-metadata">

**Author:** ![AtomicChessGuy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atomicchessguy/32/606394_2.png) [@AtomicChessGuy](https://forums.yoyoexpert.com/u/AtomicChessGuy)\
**Post date:** [April 7, 2024, 8:01pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1425 "2024-04-07T20:01:34Z")

</div>

Oh, okay. I didn’t know that. How do I design that to go in the yoyo? Thanks for the video too. Why do you need to fillet the edges on the outside where the steel meets the aluminum? And what type steel should I use? A4 Stainless Steel, Stainless Steel, Carbon Steel, Something else?

---

<div class="post-metadata">

**Author:** ![AtomicChessGuy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atomicchessguy/32/606394_2.png) [@AtomicChessGuy](https://forums.yoyoexpert.com/u/AtomicChessGuy)\
**Post date:** [April 8, 2024, 2:26am UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1426 "2024-04-08T02:26:45Z")

</div>

I remade two of my monometal designs. Are these any good?

 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/7/2/5/725509559efbf3deeff50845544c3efbdc696bff.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/b/1/4/b14d1e9bd05ae5b0a8f6958457db56d011ebc65a.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/5/b/e/5bea0eb15e5ac2603ccf48b8170e9be49b1b9c1b.jpeg)  
Specs:  
Width: 52mm  
Diameter: 56.5mm  
Half Weight: 31.54 grams  
MMOI: 17000

 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/d/c/c/dcc90b36d872637c20896f364f3fbf74be2b6537.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/3/6/0/3606ad1aed418dbd8e28ead9ef5081cb6a98f35d.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/5/e/7/5e704ee188eb47f5b5c307312eb191fd062ed473.jpeg)  
Specs:  
Width: 49mm  
Diameter: 57mm  
Half Weight: 32.61 grams  
MMOI: 18488.6

How much of an increase in MMOI should I expect to see when I change a yo-yo to bimetal?

---

<div class="post-metadata">

**Author:** ![Nic\_from\_Adelaide](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nic_from_adelaide/32/272038_2.png) [@Nic\_from\_Adelaide](https://forums.yoyoexpert.com/u/Nic_from_Adelaide)\
**Post date:** [April 8, 2024, 3:12am UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1427 "2024-04-08T03:12:08Z")

</div>

Hey all, I have a question about inverse curve/H shapes, just because I’ve never thrown anything with an extreme inverse curve.  
I’m sure someone here can set me straight.

If the point of the inverse curve is to reduce contact surface area, it does so by changing the angle of entry into the string gap. If that angle becomes too perpendicular to the gap would there be a noticeable delay in the string transitioning from the curve into the string gap (or even having the string catch in the upper side curve when doing sideways tricks).

I’m guessing the reduced friction outweighs the slower transition into the gap and the answer is ‘negligible difference’. But sideways tricks look like a hassle on some of the more extreme bell shapes around.

---

<div class="post-metadata">

**Author:** ![AtomicChessGuy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atomicchessguy/32/606394_2.png) [@AtomicChessGuy](https://forums.yoyoexpert.com/u/AtomicChessGuy)\
**Post date:** [April 8, 2024, 5:54pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1428 "2024-04-08T17:54:16Z")

</div>

![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/9/1/5/915667719b04fe347ea56c8d12bc03f9ac35ad76.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/5/1/b/51bc7f45e014647ba96f62b172b6bdf5165995a8.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/6/7/e/67ead76ff902806a223f3e8bdcee84ab20435556.jpeg)  
Specs:  
Width: 35mm  
Diameter: 42mm  
Half Weight: 32.5g  
MMOI: 9528

I think that the MMOI is too low but I couldn’t make it much higher without the yoyo being really heavy. Is this good?

---

<div class="post-metadata">

**Author:** ![MarkD](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/markd/32/40845_2.png) [@MarkD](https://forums.yoyoexpert.com/u/MarkD)\
**Post date:** [April 8, 2024, 9:37pm UTC](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547/1429 "2024-04-08T21:37:22Z")

</div>

> [@AtomicChessGuy](#):
>
> How do I design that to go in the yoyo?

I haven’t really done a design video for this yet, but you can take one of your existing plastics and pop out the hub to see how it looks.

 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/e/5/2/e5203b1abfea189f50fd7a8a44849a63a22e3dfb.png)

Here’s a screenshot of the hub/spacer parts of the [Mk1 Tangent](https://shop.yoyoexpert.com/products/tangent-yoyo-by-mk1-yoyos?_pos=1&_sid=c5fb5c0c3&_ss=r&variant=43489737375934). White here is POM, the other parts are aluminum.

[Previous page](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547.md?page=69)

[Next page](https://forums.yoyoexpert.com/t/yoyo-cad-prototyping-adventures/291547.md?page=71)
