# Yoyo Boomers Club **URL:** \ **Category:** Yo-Yo Contests, Clubs, and Events\ **Created:** [July 31, 2023, 4:13am UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535 "2023-07-31T04:13:32Z")\ **Posts on this page:** 20\ **Page:** 334
**Author:** ![rkalajian](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rkalajian/32/672584_2.png) [@rkalajian](https://forums.yoyoexpert.com/u/rkalajian)\ **Post date:** [May 14, 2025, 11:37am UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6694 "2025-05-14T11:37:59Z")
They come pre-lubed. I’m going to de-sheild them and add some silicon grease soon. ---
**Author:** ![Splizacular](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/splizacular/32/640487_2.png) [@Splizacular](https://forums.yoyoexpert.com/u/Splizacular)\ **Post date:** [May 14, 2025, 11:39am UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6695 "2025-05-14T11:39:06Z")
if yall want bearings with rubber shield options that come responsive as heck caked with grease already, fast eddy bearings is a great source ---
**Author:** ![SlowThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slowthrow/32/307451_2.png) [@SlowThrow](https://forums.yoyoexpert.com/u/SlowThrow)\ **Post date:** [May 14, 2025, 11:45am UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6696 "2025-05-14T11:45:06Z")
lol same, and the one hub locked up from too many pull starts. I disassembled it and looked at it under my scope, I had melted the bearing cage lmao. I was able to get it going again, but I was pretty surprised it built up that much heat! Unfortunately I don’t think the bearing can be removed from the hub, but I was able to get the shield off the one side of it I think the starburst is just very small, and the bearing needs more lube, all the bearings are bone dry I still love it lol ---
**Author:** ![rkalajian](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rkalajian/32/672584_2.png) [@rkalajian](https://forums.yoyoexpert.com/u/rkalajian)\ **Post date:** [May 14, 2025, 11:54am UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6697 "2025-05-14T11:54:25Z")
Agreed! It’s such an odd little yo-yo that I can’t help but love it. I may have to attempt to dremel out a groove and put some Permatex in it. I’ll probably ruin it, but it’s worth a try! ---
**Author:** ![SlowThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slowthrow/32/307451_2.png) [@SlowThrow](https://forums.yoyoexpert.com/u/SlowThrow)\ **Post date:** [May 14, 2025, 11:55am UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6698 "2025-05-14T11:55:52Z")
Good news, I know where to get a whole rack of them! ---
**Author:** ![archiesdad](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/archiesdad/32/310033_2.png) [@archiesdad](https://forums.yoyoexpert.com/u/archiesdad)\ **Post date:** [May 14, 2025, 12:17pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6699 "2025-05-14T12:17:50Z")
very impressive! ---
**Author:** ![Slestak75](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slestak75/32/212315_2.png) [@Slestak75](https://forums.yoyoexpert.com/u/Slestak75)\ **Post date:** [May 14, 2025, 12:23pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6700 "2025-05-14T12:23:29Z")
Thanks brother… that’s all I’ve got. 🤣 ---
**Author:** ![Pun1sh3R](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/pun1sh3r/32/193125_2.png) [@Pun1sh3R](https://forums.yoyoexpert.com/u/Pun1sh3R)\ **Post date:** [May 14, 2025, 12:23pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6701 "2025-05-14T12:23:47Z")
> [@rkalajian](#): > > BTW, @Pun1sh3R, do you happen to have a similar source for C bearings? I will have to go back through my Amazon orders. > [@LordKingOf](#): > > Are you folks greasing these, lube, running dry? Just put them in. They come pre lubed. A little responsive at first, but break in fairly quick. I have not added any lube to mine. ---
**Author:** ![aorear85](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/aorear85/32/632365_2.png) [@aorear85](https://forums.yoyoexpert.com/u/aorear85)\ **Post date:** [May 14, 2025, 12:55pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6702 "2025-05-14T12:55:21Z")
Got my work horse yesterday and after using it for a bit I it has gotten very unresponsive. Mine has a concave bearing in it. I bought mine second hand (but unused I think), did they come this way? Seems like the gap is wide too when compared to the Weekender or Origen. Are the bearings you posted a bit more narrow? Just trying to get more snap out of the Workhorse as mine doesn’t seem to have much even with Super Lube grease added. I really like the shape, finish and feel in the hand. Hoping to get it dialed in a bit more. ---
**Author:** ![Pun1sh3R](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/pun1sh3r/32/193125_2.png) [@Pun1sh3R](https://forums.yoyoexpert.com/u/Pun1sh3R)\ **Post date:** [May 14, 2025, 12:59pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6703 "2025-05-14T12:59:07Z")
Sounds like the Stock Bearing. Stock bearings ate 5mm wide concave D bearings. If you want more response. Add more thick lube or grease. The 4mm wide that is linked gears it more towards 0A. ---
**Author:** ![LordKingOf](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/lordkingof/32/599279_2.png) [@LordKingOf](https://forums.yoyoexpert.com/u/LordKingOf)\ **Post date:** [May 14, 2025, 1:04pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6704 "2025-05-14T13:04:05Z")
Not trying to beat a dead horse, but with the 1mm decrease, there really isn’t any issue using the stock axle? I just don’t want to find surprise nipples :joy: ---
**Author:** ![aorear85](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/aorear85/32/632365_2.png) [@aorear85](https://forums.yoyoexpert.com/u/aorear85)\ **Post date:** [May 14, 2025, 1:15pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6705 "2025-05-14T13:15:29Z")
Thanks for the clarification 😌 I think the 4mm flat is what I want. Gonna order some and give it go. Thanks for the clarification. 0A play is more what I’m looking to get out of it. I have plenty of slim C throws to satisfy my responsive 1A itch. Even with a slightly narrower bearing I think the Workhorse still has enough rim weight for some decent spin time. ---
**Author:** ![Yodaddyo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yodaddyo/32/602050_2.png) [@Yodaddyo](https://forums.yoyoexpert.com/u/Yodaddyo)\ **Post date:** [May 14, 2025, 1:32pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6706 "2025-05-14T13:32:24Z")
Again! Again! Encore! Encore! ---
**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\ **Post date:** [May 14, 2025, 1:32pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6707 "2025-05-14T13:32:32Z")
> [@rkalajian](#): > > W, @Pun1sh3R, do you happen to have a similar source for C bearings? There’s cheaper ones from the same brand, but these are ABEC-5 and run a bit smoother: [https://a.co/d/5nI7Zod](https://a.co/d/5nI7Zod) You can also search “R188-2RS Bearings” for other options of double rubber shielded flat C (or “R188-ZZ” for metal shielded). ---
**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\ **Post date:** [May 14, 2025, 1:39pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6708 "2025-05-14T13:39:02Z")
As mentioned, they come pre-lubed, but I’ve found the amount and quality of lube varies quite a bit. Some seen fine for quite a while, others I need to pop a shield off and add a drop of 3in1 oil. You can also reuse the shields which is nice, they press fit back in easily if you don’t chew it up too badly removing it. These are the same bearings I’ve been using in several sizes for my printed yoyos, and overall I’ve been really happy with them. For the A size bearings I’ve been adding a glob of thick wheel bearing grease to get them really snappy, but those are also being given out as gifts to people, many of whom have never yo’d before. ---
**Author:** ![Captrogers](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/captrogers/32/647012_2.png) [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)\ **Post date:** [May 14, 2025, 1:45pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6709 "2025-05-14T13:45:52Z")
For grease and lube I really like traxxas grease and or for an oil super lube synthetic. It’s essentially brain lube Danco silicone grease works well too ---
**Author:** ![Pun1sh3R](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/pun1sh3r/32/193125_2.png) [@Pun1sh3R](https://forums.yoyoexpert.com/u/Pun1sh3R)\ **Post date:** [May 14, 2025, 2:10pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6710 "2025-05-14T14:10:34Z")
No issue. Part of the design. 3mm wide will not work without modification. But 3mm wide makes the gap to narrow. 3mm D bearing blanks work from ZGRT because they are slightly larger at the rim and dont actually go into the bearing seat. Giving you a true fixie with a 3mm gap. ---
**Author:** ![Kalic00](https://avatars.discourse-cdn.com/v4/letter/k/f0a364/32.png) [@Kalic00](https://forums.yoyoexpert.com/u/Kalic00)\ **Post date:** [May 14, 2025, 2:24pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6711 "2025-05-14T14:24:18Z")
How does it play as a fixie? Ive been thinking about picking up the zgrt blank for mine ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [May 14, 2025, 2:32pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6712 "2025-05-14T14:32:20Z")
A second for fast eddies. I use him for almost all bearings now. MR85, A, D, and weird bearings I’m experimenting with. You can get most with rubber shields which I like. You can buy in bulk. I’ve purchased soooo many bearings from him. He doesn’t have c bearings right now but you can find those on Amazon under R188 bearing. That’s their part number. Quick edit on lube. I used to use super lube but am now a Nano Oil convert. I like the 85 weight for thick lube. 5 weight for thin. ---
**Author:** ![spyder-man](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/spyder-man/32/599092_2.png) [@spyder-man](https://forums.yoyoexpert.com/u/spyder-man)\ **Post date:** [May 14, 2025, 2:44pm UTC](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535/6713 "2025-05-14T14:44:53Z")
I thought the blank wouldn’t work - this is great news! [Previous page](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535.md?page=333) [Next page](https://forums.yoyoexpert.com/t/yoyo-boomers-club/381535.md?page=335)