# Yoyo bearings MAINTENANCE

**URL:** https://forums.yoyoexpert.com/t/yoyo-bearings-maintenance/412300
**Category:** Yo-Yo Mods and Maintenance
**Created:** [October 24, 2024, 12:13pm UTC](https://forums.yoyoexpert.com/t/yoyo-bearings-maintenance/412300 "2024-10-24T12:13:35Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![ubniversal](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/ubniversal/32/299329_2.png) [@ubniversal](https://forums.yoyoexpert.com/u/ubniversal)
#### Post date: [October 24, 2024, 12:13pm UTC](https://forums.yoyoexpert.com/t/yoyo-bearings-maintenance/412300/1 "2024-10-24T12:13:35Z")

</div>

Whats the best time to clean my yoyo bearings

---

<div class="post-metadata">

### Author: ![Tightwheel9](https://avatars.discourse-cdn.com/v4/letter/t/49beb7/32.png) [@Tightwheel9](https://forums.yoyoexpert.com/u/Tightwheel9)
#### Post date: [October 24, 2024, 12:16pm UTC](https://forums.yoyoexpert.com/t/yoyo-bearings-maintenance/412300/2 "2024-10-24T12:16:48Z")

</div>

When they become responsive

---

<div class="post-metadata">

### Author: ![Splizacular](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/splizacular/32/640487_2.png) [@Splizacular](https://forums.yoyoexpert.com/u/Splizacular)
#### Post date: [October 24, 2024, 12:17pm UTC](https://forums.yoyoexpert.com/t/yoyo-bearings-maintenance/412300/3 "2024-10-24T12:17:13Z")

</div>

when it stops working or screams louder than you can tolerate. otherwise ignore bearings

---

<div class="post-metadata">

### Author: ![Shapapy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/shapapy/32/141199_2.png) [@Shapapy](https://forums.yoyoexpert.com/u/Shapapy)
#### Post date: [October 24, 2024, 1:32pm UTC](https://forums.yoyoexpert.com/t/yoyo-bearings-maintenance/412300/4 "2024-10-24T13:32:41Z")

</div>

I used to obsess more about bearing maintenance and now I realize I was probably doing more harm by messing with them rather than just playing through it.

If they get loud and don’t quiet down after a few minutes of play, they might just need a little lube.

If they seize up or become responsive, they probably need a little cleaning. I try to avoid using solvents. My method is to lube them, play for a little bit, then take the bearing back out and use the paper method to wipe out the excess gunk, then blow out the bearing with some computer duster. That usually does the trick. If it’s super gunky, dropping it in a solvent like lighter fluid, acetone, or high percentage alcohol and shaking it up for a few minutes will loosen it up.

---

<div class="post-metadata">

### Author: ![yocolas](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yocolas/32/592703_2.png) [@yocolas](https://forums.yoyoexpert.com/u/yocolas)
#### Post date: [October 26, 2024, 3:58am UTC](https://forums.yoyoexpert.com/t/yoyo-bearings-maintenance/412300/5 "2024-10-26T03:58:10Z")

</div>

ehhh i just use soapy water and brush, then dry it with acetone
