# Yo-yo yo-yo time to go

**URL:** <https://forums.yoyoexpert.com/t/yo-yo-yo-yo-time-to-go/336704>\
**Category:** General Yo-Yo\
**Created:** [April 5, 2021, 1:14am UTC](https://forums.yoyoexpert.com/t/yo-yo-yo-yo-time-to-go/336704 "2021-04-05T01:14:29Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![DRAGON90](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@DRAGON90](https://forums.yoyoexpert.com/u/DRAGON90)\
**Post date:** [April 5, 2021, 1:14am UTC](https://forums.yoyoexpert.com/t/yo-yo-yo-yo-time-to-go/336704/1 "2021-04-05T01:14:29Z")

</div>

What is the easiest way to put a yo-yo string on to make it easier for me when I put this one it took me whole but I got there

I decided to do it this way felt like it was easy for me is screw the yo-yo part time a not put it on the bearing then screw it on

---

<div class="post-metadata">

**Author:** ![ChrisFrancz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/chrisfrancz/32/48992_2.png) [@ChrisFrancz](https://forums.yoyoexpert.com/u/ChrisFrancz)\
**Post date:** [April 5, 2021, 1:34am UTC](https://forums.yoyoexpert.com/t/yo-yo-yo-yo-time-to-go/336704/2 "2021-04-05T01:34:30Z")

</div>

Unscrewing a yoyo just to change a string is not adviseable. You can strip the axle threads AND it’s MORE work than just opening a loop at the end of the string.

---

<div class="post-metadata">

**Author:** ![DRAGON90](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@DRAGON90](https://forums.yoyoexpert.com/u/DRAGON90)\
**Post date:** [April 5, 2021, 1:45am UTC](https://forums.yoyoexpert.com/t/yo-yo-yo-yo-time-to-go/336704/3 "2021-04-05T01:45:11Z")

</div>

So if I did it this way will it work instead of screwing the yo-yo just keep it together so if I keep twisting the yo-yo to the side then pull it to get the hole make the hole bigger to fit over the top of the yo-yo then twist the bottom of the string then wrap it up to start yoyoying

Ps if I do it this way will it work

---

<div class="post-metadata">

**Author:** ![skitrz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/skitrz/32/849_2.png) [@skitrz](https://forums.yoyoexpert.com/u/skitrz)\
**Post date:** [April 5, 2021, 2:05am UTC](https://forums.yoyoexpert.com/t/yo-yo-yo-yo-time-to-go/336704/4 "2021-04-05T02:05:05Z")

</div>

[How to Put a String on a Yoyo and Adjust it for Play - YouTube](https://www.youtube.com/watch?v=jJrtgrGmZQk)

Try this.

---

<div class="post-metadata">

**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\
**Post date:** [April 5, 2021, 3:57am UTC](https://forums.yoyoexpert.com/t/yo-yo-yo-yo-time-to-go/336704/5 "2021-04-05T03:57:44Z")

</div>

Another video…  
https://www.youtube.com/embed/V04kLJ5w6aE?feature=oembed&wmode=opaque

==========

## Stringing Your Yo-Yo

Depending upon the type of yo-yo, you will need to put from one to three loops around the axle of the yo-yo.

**You should never take a yo-yo apart to string it.** This could result in the string getting caught and cut in the axle threading when you screw it back together.

A yo-yo string is simply one long string folded in half and twisted up. Remove the old string by untwisting it until you can slip the yo-yo out.

 ![Open a loop large enough to slip over the yo-yo.](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/b/6/5/b65b78101ab74e562787decd24c8f283bc246704.gif "Open a loop large enough to slip over the yo-yo.") ![Keep tension on the string while retwisting it.](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/9/5/f/95f838882c498b14a8178014da49d37fd95ac4d5.gif "Keep tension on the string while retwisting it.") To put **one loop** on a yo-yo, untwist the new string at the bottom (the end without the knot) until you have opened up a loop large enough to slip over the yo-yo. Slip this loop over the yo-yo and into the string gap. Now allow the string to retwist while keeping tension on it to avoid kinks, and you’re done!

For **two loops** , start with one loop but continue to hold the string open after slipping it into the string gap. Give it a one-half twist and slip the loop over the yo-yo again. For **three loops** , give it one more half-twist and slip it over the yo-yo again. Retwist the string after you have installed the proper number of loops.

 ![Follow the steps for three loops.](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/8/0/6/806038d97063a67015e9de53d90bf72523e15742.gif "Follow the steps for three loops.")

### Stringing Guidelines

This should give you an idea how many loops to put on your yo-yo. If you’re not sure, start with one loop and add more until your yo-yo both sleeps and comes back easily.

- All fixed axle yo-yos: One loop. Two are preferred by some for looping, and three can be used for very young children so the yo-yo doesn’t sleep, making it easier to get it back to the hand.
- Nylon transaxle yo-yos, such as the Yomega Brain: Three loops; two for more advanced players.
- Roller bearing yo-yos: One or two loops.
- Yo-yos with an adjustable string gap: Usually one loop, sometimes two.
