# wobbling yoyo/Starlite mod/fix?

**URL:** https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827
**Category:** Yo-Yo Mods and Maintenance
**Created:** [March 20, 2011, 6:32am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827 "2011-03-20T06:32:59Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![eric94306](https://avatars.discourse-cdn.com/v4/letter/e/e56c9b/32.png) [@eric94306](https://forums.yoyoexpert.com/u/eric94306)
#### Post date: [March 20, 2011, 6:32am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/1 "2011-03-20T06:32:59Z")

</div>

I have a starlite that wobbles in a really weird way. It wobbles and then spins normally and then wobbles then spins normally, and repeats. how often the pattern repeats depends on the speed it is spinning. I cant figure out why this happens but it is a really beat up yoyo.

I attached one side to a dv888 and tested it and it works fine, no vibe or wobble  
i cant try the other side because theres a long axle attached but i think this side is the problem.

the yoyo is not off balanced and the two sides are parallel as far as i can tell.  
the spacers that the bearing are suppose to lock on doesnt keep the bearing locked (i can take the bearing off without pliers) but idk if that helps. I scratched up the spacers with pliers when i was working with this yoyo so the spacers are kinda weird.

other than that i dont see anything else wrong with it so idk why it doesnt spin straight. ☹

any suggestions?  
i might post pictures of what it looks like when if i find my camera

---

<div class="post-metadata">

### Author: ![xaix](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/xaix/32/766_2.png) [@xaix](https://forums.yoyoexpert.com/u/xaix)
#### Post date: [March 20, 2011, 6:41am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/2 "2011-03-20T06:41:43Z")

</div>

maybe the problem is in your spacers

---

<div class="post-metadata">

### Author: ![Shisaki417](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/shisaki417/32/150_2.png) [@Shisaki417](https://forums.yoyoexpert.com/u/Shisaki417)
#### Post date: [March 20, 2011, 10:38pm UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/3 "2011-03-20T22:38:13Z")

</div>

Hold your finger up to it, does it stop? If not then contact YYF

---

<div class="post-metadata">

### Author: ![yoyojamben](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyojamben/32/289780_2.png) [@yoyojamben](https://forums.yoyoexpert.com/u/yoyojamben)
#### Post date: [March 21, 2011, 11:44pm UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/4 "2011-03-21T23:44:13Z")

</div>

Try making sure the spacers are nice and snug against the bearing.  
Also, tighten the arrows so they meet.  
If there is still a vibe, do what Shisaki Mentioned; Contact YYF

---

<div class="post-metadata">

### Author: ![eric94306](https://avatars.discourse-cdn.com/v4/letter/e/e56c9b/32.png) [@eric94306](https://forums.yoyoexpert.com/u/eric94306)
#### Post date: [March 24, 2011, 4:04am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/5 "2011-03-24T04:04:49Z")

</div>

So I have a broken starlite (wobbles really badly) where there is a problem with the spacers (cant be removed and is in bad shape caused by pliers) so I would like to take it apart and see if I can change it in any way so that I would still have the outside/glow in the dark parts, but spins perfectly.

I know that the problem has to do with the middle parts (spacers or axel or idk 😛 ) but I cant do anything about it since none of the pieces would move. I took this from someone else who glued it in i think. The sides are ok since if i attach a dv888 half to it, it spins fine.

So would it be possible to change the middle of the yoyo and replacing it with something cheap but spins well?

---

<div class="post-metadata">

### Author: ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)
#### Post date: [March 24, 2011, 12:57pm UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/6 "2011-03-24T12:57:35Z")

</div>

I could turn it into a small bearing.

---

<div class="post-metadata">

### Author: ![eric94306](https://avatars.discourse-cdn.com/v4/letter/e/e56c9b/32.png) [@eric94306](https://forums.yoyoexpert.com/u/eric94306)
#### Post date: [March 24, 2011, 11:43pm UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/7 "2011-03-24T23:43:50Z")

</div>

sounds nice, how would I do that?

---

<div class="post-metadata">

### Author: ![eric94306](https://avatars.discourse-cdn.com/v4/letter/e/e56c9b/32.png) [@eric94306](https://forums.yoyoexpert.com/u/eric94306)
#### Post date: [March 24, 2011, 11:47pm UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/8 "2011-03-24T23:47:05Z")

</div>

spacers are deformed and doesnt secure the bearing. When I tried to take them out they were cut and bent by my pliers. Basically, the spacers are in really bad shape but i cant take them out.

---

<div class="post-metadata">

### Author: ![XxKingDomxX23](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/xxkingdomxx23/32/614_2.png) [@XxKingDomxX23](https://forums.yoyoexpert.com/u/XxKingDomxX23)
#### Post date: [March 25, 2011, 12:50am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/9 "2011-03-25T00:50:28Z")

</div>

Dude sounds like its better for u just to buy a new Starlite. Starlites are cheap and awesome in performance, but quality is bad. U get wat u paid for in quality. So just buy a new one

---

<div class="post-metadata">

### Author: ![eric94306](https://avatars.discourse-cdn.com/v4/letter/e/e56c9b/32.png) [@eric94306](https://forums.yoyoexpert.com/u/eric94306)
#### Post date: [March 25, 2011, 2:46am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/10 "2011-03-25T02:46:32Z")

</div>

I have other yoyos, just wanted to see if I can fix this for fun

---

<div class="post-metadata">

### Author: ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [March 25, 2011, 4:23am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/11 "2011-03-25T04:23:22Z")

</div>

Then it’s probably the spacers causing the problem. Only solution is to get them out and replace them. Are they jammed in the shell or stuck on the bearing?

---

<div class="post-metadata">

### Author: ![eric94306](https://avatars.discourse-cdn.com/v4/letter/e/e56c9b/32.png) [@eric94306](https://forums.yoyoexpert.com/u/eric94306)
#### Post date: [March 25, 2011, 5:30am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/12 "2011-03-25T05:30:38Z")

</div>

they’re on the yoyo

---

<div class="post-metadata">

### Author: ![Kristiawan](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kristiawan/32/366_2.png) [@Kristiawan](https://forums.yoyoexpert.com/u/Kristiawan)
#### Post date: [March 25, 2011, 12:39pm UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/13 "2011-03-25T12:39:55Z")

</div>

It’s pulsates then.  
my protostar use to be had pulse like that, i change the spacer, and it worked nice.  
there still some vibe, but it much better now.  
maybe same thing would work for you as well.

---

<div class="post-metadata">

### Author: ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [March 25, 2011, 1:41pm UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/14 "2011-03-25T13:41:11Z")

</div>

> [@eric94306](#):
>
> they’re on the yoyo

See if you can insert something in the hole in the center and try to wiggle/pry them out similar to using a bearing removal tool to get a bearing off.

---

<div class="post-metadata">

### Author: ![eric94306](https://avatars.discourse-cdn.com/v4/letter/e/e56c9b/32.png) [@eric94306](https://forums.yoyoexpert.com/u/eric94306)
#### Post date: [March 26, 2011, 4:41am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/15 "2011-03-26T04:41:53Z")

</div>

I got it out, now what?  
new spacers and axle?  
are they the same size as protostar? and where can i buy these?

---

<div class="post-metadata">

### Author: ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [March 26, 2011, 2:24pm UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/16 "2011-03-26T14:24:26Z")

</div>

Spacers: [YoYoFactory Spacers – YoYoExpert](http://shop.yoyoexpert.com/product/124/YYF-Spacers)

Axle: [YoYoFactory Axles – YoYoExpert](http://shop.yoyoexpert.com/product/197/YYF-Axles) or a hardware store, it’s justs set screw.

---

<div class="post-metadata">

### Author: ![eric94306](https://avatars.discourse-cdn.com/v4/letter/e/e56c9b/32.png) [@eric94306](https://forums.yoyoexpert.com/u/eric94306)
#### Post date: [March 27, 2011, 12:19am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/17 "2011-03-27T00:19:12Z")

</div>

what size is the axle and spacers?  
does a northstar or protostar spacer and axle fit the starlite?

---

<div class="post-metadata">

### Author: ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [March 27, 2011, 1:07am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/18 "2011-03-27T01:07:58Z")

</div>

Yes, one size fits all, so to speak.

> [@](#):
>
> These are replacement axles for your YoYoFactory yo-yos.  
> 25mm Grind Machine, ProtoStar, NorthStar, Velocity

Thread size  
4mm x .7mm pitch

---

<div class="post-metadata">

### Author: ![eric94306](https://avatars.discourse-cdn.com/v4/letter/e/e56c9b/32.png) [@eric94306](https://forums.yoyoexpert.com/u/eric94306)
#### Post date: [March 27, 2011, 1:24am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/19 "2011-03-27T01:24:01Z")

</div>

and spacers are size 1?

---

<div class="post-metadata">

### Author: ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [March 27, 2011, 1:26am UTC](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827/20 "2011-03-27T01:26:48Z")

</div>

Yes.

[Next page](https://forums.yoyoexpert.com/t/wobbling-yoyo-starlite-mod-fix/24827.md?page=2)
