# What sized o-ring fit a PGM?
**URL:** https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132
**Category:** Yo-Yo Mods and Maintenance
**Created:** [June 2, 2010, 7:31pm UTC](https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132 "2010-06-02T19:31:58Z")
**Posts on this page:** 10
**Page:** 1
### Author:  [@Nathaniel0912](https://forums.yoyoexpert.com/u/Nathaniel0912)
#### Post date: [June 2, 2010, 7:31pm UTC](https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132/1 "2010-06-02T19:31:58Z")
on the outside to increase weight?
---
### Author:  [@Apetrunk](https://forums.yoyoexpert.com/u/Apetrunk)
#### Post date: [June 2, 2010, 10:20pm UTC](https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132/2 "2010-06-02T22:20:58Z")
Just go to a hardware store and put them in until you get one that’s very snug and possibly even hard to get in and get flat. You’ll have to in order to get it anyways, so you can kill two birds with one stone here. 🙂
---
### Author:  [@Nathaniel0912](https://forums.yoyoexpert.com/u/Nathaniel0912)
#### Post date: [June 2, 2010, 11:27pm UTC](https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132/3 "2010-06-02T23:27:41Z")
> [@Apetrunk](#):
>
> Just go to a hardware store and put them in until you get one that’s very snug and possibly even hard to get in and get flat. You’ll have to in order to get it anyways, so you can kill two birds with one stone here. 🙂
my local store only has them in little boxes i cant rip them out
---
### Author:  [@Apetrunk](https://forums.yoyoexpert.com/u/Apetrunk)
#### Post date: [June 3, 2010, 5:23am UTC](https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132/4 "2010-06-03T05:23:09Z")
Have you tried? Most of those packages are easy to open and it might seem weird but you can take them out to see that they fit. Also, usually the bigger ones aren’t packaged like that. I could be wrong though.
---
### Author:  [@Nathaniel0912](https://forums.yoyoexpert.com/u/Nathaniel0912)
#### Post date: [June 3, 2010, 5:58am UTC](https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132/5 "2010-06-03T05:58:45Z")
> [@Apetrunk](#):
>
> Have you tried? Most of those packages are easy to open and it might seem weird but you can take them out to see that they fit. Also, usually the bigger ones aren’t packaged like that. I could be wrong though.
im just scared that once the oring goes in i wont be able to get it out
---
### Author:  [@Apetrunk](https://forums.yoyoexpert.com/u/Apetrunk)
#### Post date: [June 3, 2010, 12:56pm UTC](https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132/6 "2010-06-03T12:56:12Z")
When did you get this PGM? If you know, is it a V1 or V2?
---
### Author:  [@Nathaniel0912](https://forums.yoyoexpert.com/u/Nathaniel0912)
#### Post date: [June 3, 2010, 4:30pm UTC](https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132/7 "2010-06-03T16:30:27Z")
> [@Apetrunk](#):
>
> When did you get this PGM? If you know, is it a V1 or V2?
Pretty sure its a V2 got in maybe nov. or possibly dec. if that helps
---
### Author:  [@Apetrunk](https://forums.yoyoexpert.com/u/Apetrunk)
#### Post date: [June 3, 2010, 5:17pm UTC](https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132/8 "2010-06-03T17:17:01Z")
Ok yeah I didn’t think about that part at first. However, if you bring a little needle or pin of some kind, it should be fairly easy to get it out.
---
### Author:  [@Nathaniel0912](https://forums.yoyoexpert.com/u/Nathaniel0912)
#### Post date: [June 6, 2010, 7:00pm UTC](https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132/9 "2010-06-06T19:00:08Z")
> [@Apetrunk](#):
>
> Ok yeah I didn’t think about that part at first. However, if you bring a little needle or pin of some kind, it should be fairly easy to get it out.
I got it. I think it was 3/32 or 2/32 whichever is an actual size
---
### Author:  [@yoyoninja](https://forums.yoyoexpert.com/u/yoyoninja)
#### Post date: [June 6, 2010, 8:21pm UTC](https://forums.yoyoexpert.com/t/what-sized-o-ring-fit-a-pgm/15132/10 "2010-06-06T20:21:17Z")
what is the diameter of the o-ring