# What nozzle fits Motorsil D silicone tube? **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [February 19, 2021, 7:15pm UTC](https://forums.yoyoexpert.com/t/what-nozzle-fits-motorsil-d-silicone-tube/334461 "2021-02-19T19:15:27Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![beezy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/beezy/32/161690_2.png) [@beezy](https://forums.yoyoexpert.com/u/beezy)\ **Post date:** [February 19, 2021, 7:15pm UTC](https://forums.yoyoexpert.com/t/what-nozzle-fits-motorsil-d-silicone-tube/334461/1 "2021-02-19T19:15:27Z")
I usually form a temporary cone with tape and cardboard to attach to the end of the Motorsil D tube when I re-silicone yoyo response. Today it was a huge pain, though. Unlike other flowable silicone, Motorsil D does not come with a nozzle. Anyone know what nozzles fit on Motorsil D tubes? I can measure it and figure it out, maybe. But I was hoping someone might now… ---
**Author:** ![Kray](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kray/32/92176_2.png) [@Kray](https://forums.yoyoexpert.com/u/Kray)\ **Post date:** [February 19, 2021, 7:31pm UTC](https://forums.yoyoexpert.com/t/what-nozzle-fits-motorsil-d-silicone-tube/334461/2 "2021-02-19T19:31:51Z")
If you have a 3D printer I can send you my model I am using. ---
**Author:** ![beezy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/beezy/32/161690_2.png) [@beezy](https://forums.yoyoexpert.com/u/beezy)\ **Post date:** [February 19, 2021, 9:32pm UTC](https://forums.yoyoexpert.com/t/what-nozzle-fits-motorsil-d-silicone-tube/334461/3 "2021-02-19T21:32:09Z")
Hey thanks, but I don’t have access to a 3d printer. I take it you had the same issue, too? ---
**Author:** ![Kray](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kray/32/92176_2.png) [@Kray](https://forums.yoyoexpert.com/u/Kray)\ **Post date:** [February 19, 2021, 9:34pm UTC](https://forums.yoyoexpert.com/t/what-nozzle-fits-motorsil-d-silicone-tube/334461/4 "2021-02-19T21:34:46Z")
Yes. I have no clue if there is a buyable solution to it. I wanted to have something with a shorter nozzle since everything is just drying in these long ones. ---
**Author:** ![beezy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/beezy/32/161690_2.png) [@beezy](https://forums.yoyoexpert.com/u/beezy)\ **Post date:** [February 19, 2021, 9:39pm UTC](https://forums.yoyoexpert.com/t/what-nozzle-fits-motorsil-d-silicone-tube/334461/5 "2021-02-19T21:39:34Z")
Do you happen to have the measurements for it? If it’s not handy, now worries, I’ll measure it myself. I threw away the last bit of a tube of Motorsil D today because my makeshift nozzle came apart and sili was oozing everywhere. What a mess. Anyways, I have a fresh tube left and need to get a nozzle for next time. ---
**Author:** ![Kray](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kray/32/92176_2.png) [@Kray](https://forums.yoyoexpert.com/u/Kray)\ **Post date:** [February 19, 2021, 9:44pm UTC](https://forums.yoyoexpert.com/t/what-nozzle-fits-motorsil-d-silicone-tube/334461/6 "2021-02-19T21:44:32Z")
I guess you refer to the tube cap (not sure what the correct word is for it)? 10.8mm x 5.4mm (height is just what I use for my model) ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/b/7/cb79f784c97b6919a6fcbcd405794761e7c6140d.jpeg) ---
**Author:** ![beezy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/beezy/32/161690_2.png) [@beezy](https://forums.yoyoexpert.com/u/beezy)\ **Post date:** [February 19, 2021, 9:51pm UTC](https://forums.yoyoexpert.com/t/what-nozzle-fits-motorsil-d-silicone-tube/334461/7 "2021-02-19T21:51:50Z")
Thanks!! ---
**Author:** ![persson](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/persson/32/208357_2.png) [@persson](https://forums.yoyoexpert.com/u/persson)\ **Post date:** [July 28, 2026, 1:49pm UTC](https://forums.yoyoexpert.com/t/what-nozzle-fits-motorsil-d-silicone-tube/334461/8 "2026-07-28T13:49:56Z")
After 5 years you will have found a solution 😄 but if it were useful to someone else, the simplest method is to pour a little paste into a syringe for injections, without its needle and use its nozzle to apply it… it is also recommended to keep it in a cold place, such as in the refrigerator.