# What if the RBC was unresponsive 🤔 **URL:** \ **Category:** General Yo-Yo\ **Created:** [October 15, 2022, 3:52pm UTC](https://forums.yoyoexpert.com/t/what-if-the-rbc-was-unresponsive/364348 "2022-10-15T15:52:45Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![mable](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mable/32/194074_2.png) [@mable](https://forums.yoyoexpert.com/u/mable)\ **Post date:** [October 15, 2022, 4:16pm UTC](https://forums.yoyoexpert.com/t/what-if-the-rbc-was-unresponsive/364348/4 "2022-10-15T16:16:39Z")
> [@MK1 and Spinworthy present - The RBC!](https://forums.yoyoexpert.com/t/mk1-and-spinworthy-present-the-rbc/349268/200): > > [image] Cleaned = dipped in solvent to get rid of any stray lubricant Beefcaked = stack two of them on top of each other. An old modding technique. Note the groove that forms between the two bearings! Mark and others have beefcaked the RBC to make it unresponsive. Just get a second bearing, make sure they’re both clean, and be careful when screwing back together. It won’t be good. As far as unresponsive 1A is concerned it’s going to be too light, not enough rim weight, narrow + high walled, also the bearings are just tiny and aren’t going to spin for that long. All of these design choices make it great for responsive 0A play… but these are also all things that make it straight up bad for unresponsive 1A play. Nothing is stopping you other than the cost of a second bearing if your morbid curiosity gets the better of you. It’s the inverse of why you can’t slap a bearing blank in a draupnir and expect a good responsive yoyo. --- _[View the full topic](https://forums.yoyoexpert.com/t/what-if-the-rbc-was-unresponsive/364348)._