# Wedge yo-yo dimples

**URL:** https://forums.yoyoexpert.com/t/wedge-yo-yo-dimples/367607
**Category:** Looking for Help/Recommendation
**Created:** [December 29, 2022, 5:02am UTC](https://forums.yoyoexpert.com/t/wedge-yo-yo-dimples/367607 "2022-12-29T05:02:02Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![AJM](https://avatars.discourse-cdn.com/v4/letter/a/5fc32e/32.png) [@AJM](https://forums.yoyoexpert.com/u/AJM)
#### Post date: [December 29, 2022, 5:02am UTC](https://forums.yoyoexpert.com/t/wedge-yo-yo-dimples/367607/1 "2022-12-29T05:02:02Z")

</div>

Hi I love my wedge which I just got but one problem is it vibes like crazy and the main thing is the finger spin dimples fall out

---

<div class="post-metadata">

### Author: ![MarioMaker17](https://avatars.discourse-cdn.com/v4/letter/m/4bbf92/32.png) [@MarioMaker17](https://forums.yoyoexpert.com/u/MarioMaker17)
#### Post date: [December 29, 2022, 5:53am UTC](https://forums.yoyoexpert.com/t/wedge-yo-yo-dimples/367607/2 "2022-12-29T05:53:54Z")

</div>

Doesn’t seem normal for the wedge yoyo (or any yoyo for that matter). If you purchased the yoyo on YoYoExpert you should contact YYE customer service.  
@yyfben2.deactivated Is this a common problem for the wedge yoyo assembly.  
.

---

<div class="post-metadata">

### Author: ![yyfben2.deactivated](https://avatars.discourse-cdn.com/v4/letter/y/ccd318/32.png) [@yyfben2.deactivated](https://forums.yoyoexpert.com/u/yyfben2.deactivated)
#### Post date: [December 30, 2022, 12:44am UTC](https://forums.yoyoexpert.com/t/wedge-yo-yo-dimples/367607/3 "2022-12-30T00:44:48Z")

</div>

So what we see here is a combination. Of issues. A problem, cause and effect all described.  
The yo-yo is tuned at the factory. Take the hub out, it’s not tuned, it wobbles and the hub is less likely to fit.

Trick here is to not take them out in the first place.

Is this common? Yes, if you take it out.

Can it be fixed? Mark the hub with a sharpie. Draw a line from the hub to the body on both surfaces. From here, 12oclock try rotating the parts to find a position like it was new. Then do no remove the hub. If the plastic in the hub has been damaged this will no longer work.
