# Waffle stomper

**URL:** <https://forums.yoyoexpert.com/t/waffle-stomper/425273>\
**Category:** General Yo-Yo\
**Created:** [May 16, 2025, 11:23pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273 "2025-05-16T23:23:22Z")\
**Posts on this page:** 20\
**Page:** 6

<div class="post-metadata">

**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\
**Post date:** [June 19, 2025, 1:26pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/101 "2025-06-19T13:26:29Z")

</div>

I’ve tried a few GITD strings, and they’re incredibly rough. Like sandpaper in string form. I think it’s similar to 3D printer filament, where the particles that make it glow also make it highly abrasive, to the point that it wears through the PTFE guide tubes and steel nozzles. Would be super cool if you find something that’s not like that though.

---

<div class="post-metadata">

**Author:** ![rkalajian](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rkalajian/32/672584_2.png) [@rkalajian](https://forums.yoyoexpert.com/u/rkalajian)\
**Post date:** [June 19, 2025, 1:59pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/102 "2025-06-19T13:59:28Z")

</div>

They do tend to be a bit rougher, but this would be a single strand in the overall string, so I’m not too worried.

---

<div class="post-metadata">

**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\
**Post date:** [June 19, 2025, 2:18pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/103 "2025-06-19T14:18:25Z")

</div>

It is very abrasive haha. Between all the metal I was printing for the waffle stomper and glow I was even burning through a hardened steel nozzle so I invested in a diamondback (solid diamond tip) nozzle.

 ![IMG_9390](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/6/7/b/67b5eb49b10ce59e1ed6cb2d5ed8875c502a0648.jpeg)

---

<div class="post-metadata">

**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\
**Post date:** [June 19, 2025, 2:37pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/104 "2025-06-19T14:37:21Z")

</div>

Ooooh, nice! I’ve looked at diamond and ruby tipped nozzles, but have just been replacing the hardened steel ones periodically as they start to wear. Same with all the PTFE tubes. I do need to replace all the PTFE tubing in my AMS and printer soon though, I’ve started getting occasional feed errors, which is usually a sign that a guide tube is worn through or nearly worn through somewhere.

---

<div class="post-metadata">

**Author:** ![Captrogers](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/captrogers/32/647012_2.png) [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)\
**Post date:** [June 19, 2025, 2:40pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/105 "2025-06-19T14:40:30Z")

</div>

I’ve only heard good things in diamond back nozzles

---

<div class="post-metadata">

**Author:** ![SlowThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slowthrow/32/307451_2.png) [@SlowThrow](https://forums.yoyoexpert.com/u/SlowThrow)\
**Post date:** [June 19, 2025, 4:27pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/106 "2025-06-19T16:27:53Z")

</div>

Magic YoYo makes a few glow in the dark, as well as twisted string, but I’m HYPED for throwyo glow string!!!

---

<div class="post-metadata">

**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\
**Post date:** [June 19, 2025, 5:17pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/107 "2025-06-19T17:17:47Z")

</div>

Yeah because the tip doesn’t wear down I’m getting incredibly clean prints, even better than the first two runs I did, plus I was able to move down to 0.4 mm printing metal instead of 0.6 mm.

 ![IMG_9558](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/a/4/3/a43bfd67b2ae9330f24b499bb741f0c93ec1cc72.jpeg)

---

<div class="post-metadata">

**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\
**Post date:** [June 19, 2025, 5:19pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/108 "2025-06-19T17:19:10Z")

</div>

I bought some of that magic Yoyo string yo try out in a waffle stomper and it was turning it unresponsive lol. I don’t know why something about the string. It made the response so bad.

---

<div class="post-metadata">

**Author:** ![rkalajian](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rkalajian/32/672584_2.png) [@rkalajian](https://forums.yoyoexpert.com/u/rkalajian)\
**Post date:** [June 19, 2025, 5:51pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/109 "2025-06-19T17:51:59Z")

</div>

The glow thread I ordered will be coming in tomorrow, so I’ll be able to test before I’m out-of-workshop for a week.

---

<div class="post-metadata">

**Author:** ![SlowThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slowthrow/32/307451_2.png) [@SlowThrow](https://forums.yoyoexpert.com/u/SlowThrow)\
**Post date:** [June 19, 2025, 6:22pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/110 "2025-06-19T18:22:03Z")

</div>

Oh man can custom order like black with glow and neon yellow highlights? That’s like a dream combo of mine lol

---

<div class="post-metadata">

**Author:** ![rkalajian](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rkalajian/32/672584_2.png) [@rkalajian](https://forums.yoyoexpert.com/u/rkalajian)\
**Post date:** [June 20, 2025, 6:55pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/111 "2025-06-20T18:55:14Z")

</div>

I mean, totally!

Also, here’s the new Night Soil. Letting it soak up some light then I’ll see if I can get a pic of it glowing.

 ![signal-2025-06-20-145400_002](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/c/7/cc7234726c75c6c50dbfe0ac6171095f38442e80.jpeg)

---

<div class="post-metadata">

**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\
**Post date:** [June 29, 2025, 5:31pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/112 "2025-06-29T17:31:11Z")

</div>

Took me a solid week to dial in this white TPU rubber but I have finally achieved 90s white dog poo counterweights for the Barium Smoothie colorway. I have to print them one at a time, no batches, so it’ll be a little slower to make at scale haha.

 ![IMG_9678](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/f/7/7/f7779bc6da13cbc33771bb940d0b67e32e7b7890.jpeg)

---

<div class="post-metadata">

**Author:** ![rkalajian](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rkalajian/32/672584_2.png) [@rkalajian](https://forums.yoyoexpert.com/u/rkalajian)\
**Post date:** [July 7, 2025, 12:20pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/113 "2025-07-07T12:20:12Z")

</div>

I’m finally catching up on strings for the Barium Smoothie edition of the Waffle Stomper. I’ve decided since the barium goes in one way for the colorway, it should go it the OTHER way for the string. Hence, the new strings will be called Barium Enema.

---

<div class="post-metadata">

**Author:** ![kretzschmar](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kretzschmar/32/668707_2.png) [@kretzschmar](https://forums.yoyoexpert.com/u/kretzschmar)\
**Post date:** [July 10, 2025, 12:53pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/114 "2025-07-10T12:53:34Z")

</div>

Trying to finish my collection.

If anyone has a blue and brown and it’s not your jam, hit me up :heart:.

Edit: Also found that a wide MR85, tighten (but not overtightened cuz it’s not healthy on the waffles), with thick lube and a fat string is perfection

---

<div class="post-metadata">

**Author:** ![rkalajian](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rkalajian/32/672584_2.png) [@rkalajian](https://forums.yoyoexpert.com/u/rkalajian)\
**Post date:** [July 10, 2025, 1:09pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/115 "2025-07-10T13:09:11Z")

</div>

Barium Enema strings are on their way to @AudreySickburn now. Should in their hands early next week!

---

<div class="post-metadata">

**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\
**Post date:** [July 10, 2025, 2:33pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/116 "2025-07-10T14:33:40Z")

</div>

Hooray! Nobody missing strings DMed me so I’m probably going to be doing a best guess what color I sent folks and sending them the string in their swag pack that way. We will see how good my memory is! (It’s not great)

---

<div class="post-metadata">

**Author:** ![Captrogers](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/captrogers/32/647012_2.png) [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)\
**Post date:** [July 10, 2025, 3:30pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/117 "2025-07-10T15:30:47Z")

</div>

lol i wouldn’t even know to be honest. String goes in string box or in a yoyo and gets played. Hsvent thr slightest clue what all I have on hand at any given time of what I hit after a week

---

<div class="post-metadata">

**Author:** ![SlowThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slowthrow/32/307451_2.png) [@SlowThrow](https://forums.yoyoexpert.com/u/SlowThrow)\
**Post date:** [July 10, 2025, 3:32pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/118 "2025-07-10T15:32:29Z")

</div>

lol my red one came with a Kitty Fat on it, was I supposed to DM? Musta missed that 😅

---

<div class="post-metadata">

**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\
**Post date:** [July 10, 2025, 5:05pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/119 "2025-07-10T17:05:41Z")

</div>

Oh yeah so here is the deal! I have zero self control. I mailed out a lot of Waffle Stompers before Berv had the special strings ready.

So I’m going to make swag packs for everyone, with the special string, a hex key in case you need to take it apart, a 4mm wide bearing in case your seat gets damaged, probably some stickers and whatever. But I don’t know which strings to send to which people because I’m a heated mess and did not track which colors went to who and who got a special string and who didn’t. So if all you received was 1) kitty fat or 2) yoyo string lab plutonium (sent with all glow in the darks) then please dm me with the color you received so I can send you a matching string!

---

<div class="post-metadata">

**Author:** ![Veedo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/veedo/32/242414_2.png) [@Veedo](https://forums.yoyoexpert.com/u/Veedo)\
**Post date:** [July 10, 2025, 5:23pm UTC](https://forums.yoyoexpert.com/t/waffle-stomper/425273/120 "2025-07-10T17:23:17Z")

</div>

How do I get my hands on a WS?

[Previous page](https://forums.yoyoexpert.com/t/waffle-stomper/425273.md?page=5)

[Next page](https://forums.yoyoexpert.com/t/waffle-stomper/425273.md?page=7)
