# Untying knots

**URL:** <https://forums.yoyoexpert.com/t/untying-knots/17593>\
**Category:** General Yo-Yo\
**Created:** [August 6, 2010, 9:16am UTC](https://forums.yoyoexpert.com/t/untying-knots/17593 "2010-08-06T09:16:34Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![rusty](https://avatars.discourse-cdn.com/v4/letter/r/f17d59/32.png) [@rusty](https://forums.yoyoexpert.com/u/rusty)\
**Post date:** [August 6, 2010, 9:16am UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/1 "2010-08-06T09:16:34Z")

</div>

Hi

What do you do when you have a knot on your string around the bearing?  
Do you unscrew the yo-yo and untie it that way?

I started with unscrewing the yo-yo, but figured it was not good for the yo-yo to be taken apart so often (I am good at making knots :)). Now I use a nail to get the string out from the bearing.

How do you do it?

---

<div class="post-metadata">

**Author:** ![BuddhaFusion](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/buddhafusion/32/465_2.png) [@BuddhaFusion](https://forums.yoyoexpert.com/u/BuddhaFusion)\
**Post date:** [August 6, 2010, 9:28am UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/2 "2010-08-06T09:28:22Z")

</div>

i unscrew it if its deep enough where i can use my fingernail to get it out besides that i unscrew it. if anything happens to the axle when unscrewing it :-\ i guess i have to buy another axle hahaha :D!

---

<div class="post-metadata">

**Author:** ![fender1120916](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/fender1120916/32/416_2.png) [@fender1120916](https://forums.yoyoexpert.com/u/fender1120916)\
**Post date:** [August 6, 2010, 10:38am UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/3 "2010-08-06T10:38:20Z")

</div>

i use my finger nail.

---

<div class="post-metadata">

**Author:** ![mikelz777](https://avatars.discourse-cdn.com/v4/letter/m/3da27b/32.png) [@mikelz777](https://forums.yoyoexpert.com/u/mikelz777)\
**Post date:** [August 6, 2010, 12:42pm UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/4 "2010-08-06T12:42:35Z")

</div>

I usually work it out with a bent paper clip or one of those sturdy round tooth picks. I don’t take the yoyo apart unless it’s a really tight and tangled mess and even then, I usually just loosen it enough to work out the knot or snag.

---

<div class="post-metadata">

**Author:** ![dyladon](https://avatars.discourse-cdn.com/v4/letter/d/bc79bd/32.png) [@dyladon](https://forums.yoyoexpert.com/u/dyladon)\
**Post date:** [August 6, 2010, 12:45pm UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/5 "2010-08-06T12:45:46Z")

</div>

is it really bad for the yoyo to be unscrewed so much?

---

<div class="post-metadata">

**Author:** ![mikelz777](https://avatars.discourse-cdn.com/v4/letter/m/3da27b/32.png) [@mikelz777](https://forums.yoyoexpert.com/u/mikelz777)\
**Post date:** [August 6, 2010, 1:11pm UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/6 "2010-08-06T13:11:40Z")

</div>

“Really bad”? Probably not. The way I look at it is, if it’s working fine the way it is, don’t mess with it. If you unscrew/screw it a lot, you’re increasing the chances that you could damage the axle or something else could go wrong. (stripping the threads, wearing it down so it doesn’t hold as well, losing bearings/spacers etc.) Maybe you could unscrew/screw it thousands of times with no effect. I don’t know and will never find out. My approach is to do it as infrequently as possible.

---

<div class="post-metadata">

**Author:** ![ImNoYoYo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/imnoyoyo/32/624_2.png) [@ImNoYoYo](https://forums.yoyoexpert.com/u/ImNoYoYo)\
**Post date:** [August 6, 2010, 2:52pm UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/7 "2010-08-06T14:52:44Z")

</div>

I unscrew it then unravel the string.

---

<div class="post-metadata">

**Author:** ![smole388](https://avatars.discourse-cdn.com/v4/letter/s/e274bd/32.png) [@smole388](https://forums.yoyoexpert.com/u/smole388)\
**Post date:** [August 6, 2010, 3:02pm UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/8 "2010-08-06T15:02:34Z")

</div>

everybody thinks its bad to unscrew the yoyo often. its not. the only damage that can be done is if u screw it in wrong or u overtighten it. and if this happens no u cant “just buy a new axle” becaus the axle is made of hardened steel and the threads in the yoyo are aluminum(soft metal). and the axle wont strip, the inside of the yoyo will but then ur pretty much screwed cuz u would have to get it drilled out and get more threads put in

---

<div class="post-metadata">

**Author:** ![AtomBomb](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/atombomb/32/587_2.png) [@AtomBomb](https://forums.yoyoexpert.com/u/AtomBomb)\
**Post date:** [August 6, 2010, 3:09pm UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/9 "2010-08-06T15:09:50Z")

</div>

My throw bag has a stash of paper clips I unbend and use for such occasions. 🙂

---

<div class="post-metadata">

**Author:** ![x52](https://avatars.discourse-cdn.com/v4/letter/x/3bc359/32.png) [@x52](https://forums.yoyoexpert.com/u/x52)\
**Post date:** [August 6, 2010, 3:16pm UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/10 "2010-08-06T15:16:11Z")

</div>

I usually just use my finger nail, or unscrew the yoyo if I have to.

---

<div class="post-metadata">

**Author:** ![dryoyo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dryoyo/32/39_2.png) [@dryoyo](https://forums.yoyoexpert.com/u/dryoyo)\
**Post date:** [August 6, 2010, 3:26pm UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/11 "2010-08-06T15:26:14Z")

</div>

![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/e/1/3/e13e782a8600d98955fcb659fd4439f1890a41b6.jpeg)  
I don’t like taking the yo-yo apart. I use this high precision instrument of knottistics

---

<div class="post-metadata">

**Author:** ![patrickcondon](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/patrickcondon/32/619950_2.png) [@patrickcondon](https://forums.yoyoexpert.com/u/patrickcondon)\
**Post date:** [August 6, 2010, 5:03pm UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/12 "2010-08-06T17:03:49Z")

</div>

> [@mikelz777](#):
>
> If you unscrew/screw it a lot, you’re increasing the chances that you could damage the axle or something else could go wrong. (stripping the threads, wearing it down so it doesn’t hold as well, losing bearings/spacers etc.)

Yeah only if you are screwing it together wrong (pushing while screwing, misthreading, overtightening), just be careful and you’ll be just fine.

---

<div class="post-metadata">

**Author:** ![Elephark](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/elephark/32/496_2.png) [@Elephark](https://forums.yoyoexpert.com/u/Elephark)\
**Post date:** [August 6, 2010, 10:27pm UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/13 "2010-08-06T22:27:54Z")

</div>

I throw the whole thing in the rubbish bin. I hate yoyos that get knots in them.

---

<div class="post-metadata">

**Author:** ![zerrubabbel](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/zerrubabbel/32/592_2.png) [@zerrubabbel](https://forums.yoyoexpert.com/u/zerrubabbel)\
**Post date:** [August 7, 2010, 12:58am UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/14 "2010-08-07T00:58:52Z")

</div>

> [@Elephark](#):
>
> I throw the whole thing in the rubbish bin. I hate yoyos that get knots in them.

String gets knots … Not yoyos

---

<div class="post-metadata">

**Author:** ![samyoyos](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/samyoyos/32/605_2.png) [@samyoyos](https://forums.yoyoexpert.com/u/samyoyos)\
**Post date:** [August 7, 2010, 1:02am UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/15 "2010-08-07T01:02:00Z")

</div>

if it is to hard to get out i replace the string.

---

<div class="post-metadata">

**Author:** ![speedmaker1101](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/speedmaker1101/32/95_2.png) [@speedmaker1101](https://forums.yoyoexpert.com/u/speedmaker1101)\
**Post date:** [August 7, 2010, 4:34am UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/16 "2010-08-07T04:34:52Z")

</div>

I steal bobby pins out of my sisters head when shes not looking 🙂

---

<div class="post-metadata">

**Author:** ![Snooplupe](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/snooplupe/32/116107_2.png) [@Snooplupe](https://forums.yoyoexpert.com/u/Snooplupe)\
**Post date:** [March 29, 2021, 4:13am UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/17 "2021-03-29T04:13:30Z")

</div>

Me too

---

<div class="post-metadata">

**Author:** ![eternalmetal](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/eternalmetal/32/44877_2.png) [@eternalmetal](https://forums.yoyoexpert.com/u/eternalmetal)\
**Post date:** [March 29, 2021, 4:30am UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/18 "2021-03-29T04:30:16Z")

</div>

Holy necro, last post here was over a decade ago. 🤨

I use a toothpick. No metal on metal scraping and no need to take apart a yoyo.

---

<div class="post-metadata">

**Author:** ![hobby\_master](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hobby_master/32/145533_2.png) [@hobby\_master](https://forums.yoyoexpert.com/u/hobby_master)\
**Post date:** [March 29, 2021, 5:24am UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/19 "2021-03-29T05:24:40Z")

</div>

unscrewing and retightening can cause eventually wearing down of where the bearing and the bearing seat post in theory causing vibe down the road. aluminum is a really soft metal and as we all know dings easily. also threading issues. the aluminum threads will strip before a steel axle will

---

<div class="post-metadata">

**Author:** ![Grendel](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/grendel/32/92975_2.png) [@Grendel](https://forums.yoyoexpert.com/u/Grendel)\
**Post date:** [March 29, 2021, 5:51am UTC](https://forums.yoyoexpert.com/t/untying-knots/17593/20 "2021-03-29T05:51:02Z")

</div>

See my “knotty” thread. That’s how’s it done my friends.
