# Uh-oh
**URL:** https://forums.yoyoexpert.com/t/uh-oh/2613
**Category:** Yo-Yo Mods and Maintenance
**Created:** [May 25, 2009, 3:30am UTC](https://forums.yoyoexpert.com/t/uh-oh/2613 "2009-05-25T03:30:47Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@Smoke770077](https://forums.yoyoexpert.com/u/Smoke770077)
#### Post date: [May 25, 2009, 3:30am UTC](https://forums.yoyoexpert.com/t/uh-oh/2613/1 "2009-05-25T03:30:47Z")
I was goofing around and tried to beefcake my Sunset… It worked, it has a much longer spin time, you can do string trick with it, and its completely unresponive… Alot of fun… one problem…
I cant get the other bearing out… Im using my aquarius bearing and cant get it out of the sunset… Any tips? Pliers wont work
---
### Author:  [@Apetrunk](https://forums.yoyoexpert.com/u/Apetrunk)
#### Post date: [May 25, 2009, 3:51am UTC](https://forums.yoyoexpert.com/t/uh-oh/2613/2 "2009-05-25T03:51:24Z")
Doesn’t the Aquarius have a B size bearing and the Sunset a C? How hard are you squeezing the pliers?
---
### Author:  [@Paolo](https://forums.yoyoexpert.com/u/Paolo)
#### Post date: [May 25, 2009, 4:19am UTC](https://forums.yoyoexpert.com/t/uh-oh/2613/3 "2009-05-25T04:19:30Z")
Just keep trying,I dont think there is much else,try to place a pin under the bearing,but I doubt it will work any better than pliers.
---
### Author:  [@Apetrunk](https://forums.yoyoexpert.com/u/Apetrunk)
#### Post date: [May 25, 2009, 4:23am UTC](https://forums.yoyoexpert.com/t/uh-oh/2613/4 "2009-05-25T04:23:42Z")
Yeah just keep trying. I tried to take the bearing out of my Spinmaster 2 and it took me at least 30 minutes before i finally decided to just squeeze as hard as I could and i got it off and the bearing is still good and didn’t bend or anything. As long as you just use your hands to sqeeze the pliers and not a machine you shouldn’t have to worry about messing the bearing up.
---
### Author:  [@EvanB](https://forums.yoyoexpert.com/u/EvanB)
#### Post date: [May 25, 2009, 5:18am UTC](https://forums.yoyoexpert.com/t/uh-oh/2613/5 "2009-05-25T05:18:47Z")
Be careful.
I hate YYJ small bearings. I had one in my old Matrixx, my old Aqua and my Sunset. I lost mine for my Aqua so I used the one for my Matrixx, impossible to get out. Finaly, I pulled as hard as I could, BANG, it exploded, all the rims and balls. I once tried to use my Sunset bearing on my Aqua, couldn’t get it out of my Aquarius! Took me an hour because I didn’t want to break it.
Be careful.
---
### Author:  [@Paolo](https://forums.yoyoexpert.com/u/Paolo)
#### Post date: [May 25, 2009, 5:20am UTC](https://forums.yoyoexpert.com/t/uh-oh/2613/6 "2009-05-25T05:20:39Z")
> [@Evan](#):
>
> Be careful.
>
> I hate YYJ small bearings. I had one in my old Matrixx, my old Aqua and my Sunset. I lost mine for my Aqua so I used the one for my Matrixx, impossible to get out. Finaly, I pulled as hard as I could, BANG, it exploded, all the rims and balls. I once tried to use my Sunset bearing on my Aqua, couldn’t get it out of my Aquarius! Took me an hour because I didn’t want to break it.
>
> Be careful.
Wow,you were down to one bearing…
---
### Author:  [@Dudeofyo](https://forums.yoyoexpert.com/u/Dudeofyo)
#### Post date: [May 27, 2009, 5:10pm UTC](https://forums.yoyoexpert.com/t/uh-oh/2613/7 "2009-05-27T17:10:44Z")
Yes, getting a bearing that size out of any yoyo can be quite a fight.
I had that problem with a DragonJam, Aquarius, Matrix… in the end
if you try hard enough with the plier, you will get it out. grab it firmly
with pliers that have a sort of rounded inner area to grab the bearing.
Then, pliers from side to side to get it out. DON"T put the yoyo in a vice,
as my friend did that and screwed up/bent his bearing. Good luck.
---
### Author:  [@Batryn](https://forums.yoyoexpert.com/u/Batryn)
#### Post date: [May 27, 2009, 11:47pm UTC](https://forums.yoyoexpert.com/t/uh-oh/2613/8 "2009-05-27T23:47:07Z")
Yeah. Grip the bearing as hard as you can, it won’t bend unless you’re superman, then, wiggle it up, down .ect.