# TryCatchThrow@'s 3D Printed Wares
**URL:** https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921
**Category:** Buy / Sell / Trade
**Created:** [October 18, 2024, 6:06pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921 "2024-10-18T18:06:10Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [October 18, 2024, 6:06pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/1 "2024-10-18T18:06:10Z")
Greetings! Today I have a few personally printed and assembled 3D printed throws and parts for you. All prices are PayPal G&S fees and shipping in the CONUS included. I ship best effort next day on Wednesdays, Thursdays, and Fridays (so today being Friday, next shipping day I can guarantee is Wednesday).
Feel free to DM me any questions.
I have a feedback thread here: [Feedback for @TryCatchThrow (Keith)](https://forums.yoyoexpert.com/t/feedback-for-trycatchthrow-keith/364190)
## TMBR Replacement Axles - $15
One brown standard sized, one black slim sized. Please read this thread before buying:
> [@The Definitive Guide To TryCatchThrow@'s Replacement TMBR Axles](https://forums.yoyoexpert.com/t/the-definitive-guide-to-trycatchthrow-s-replacement-tmbr-axles/402822):
>
> Believe it or not, there is enough to know about the purchase and operation of a TMBR replacement axle that I thought it would be useful to have a small guide. Sizes The TMBR replacement axles currently come in two sizes, the standard and the slim. Both feature the same 2.2mm gap, but the slim has shorter caps and threads. The full stack of the regular axle comes out to a 34.7mm width. The full stack of the slim comes out to 30.1mm wide. There may be other sized TMBR caps and axles out ther…
## Fireflies - Space Gray and Teal - $30
The Firefly is my modern responsive, featuring an MR85 bearing. The shape is roughly Butterfly, but I will get detailed specs this week. They use Origen pads, the same size as RBC and Harbinger. Features a fingerspin dimple and a schmoove groove.
Specs
- 56.2mm diameter
- 34.2mm wide
- 48.5g
## Fireflies - Browncoat, Outrun Spectra, and Incredible - SALE PRICE $30
Release weekend sale at $30 (regularly $40). Ends Wednesday 3/26.
The Firefly is my modern responsive, featuring an MR85 bearing. The shape is roughly Butterfly, but I will get detailed specs this week. I aimed for 46ish grams apiece. They use Origen pads, the same size as RBC and Harbinger. Features a fingerspin dimple and a schmoove groove.
## Take Apart Pixies - Light Cycles - $25
My latest experiment with different guts. Features a 3x6x6mm bushing over an M3 screw for an axle. You can play them with poly string if you like. I prefer double looped poly for response on these (which is how I used to set up Butterflies), but you could also just torque it up until the string breaks in.
## Take Apart Cardigans - Out Run - $40
These feature the same axle system as the take apart Pixies. These feature original art by me.
## Firefly Proto - Browncoat - $40 - One Remains
This is an MR85 bearing responsive. It is roughly Butterfly shaped with a dimple. These two are protos and use a spacer in between the bearing and axle, not unlike the Kasm. In future iterations I have reworked the seat to no longer need this feature. They have silicone response but should be the appropriate size for RBC pads, I simply haven’t had any to test yet.
- 56.5mm diameter
- 33.9mm wide
- 2mm gap
- 42.75g
## Oversized Firefly Proto - Purple - $35
MR85 bearing responsive. Has a spacer between bearing and axle. Silicone response. This one features a schmoove groove.
- 60mm diameter
- 37mm diameter
- 2.6mm gap
- 49.9g
## Brute - Iron Man - $35 - Two Remain
The Brute was conceived as a way to replicate the string presence and play feel of a KNack with 3D printing friendly design. These come with matching weights.
- 57.5mm diameter
- 35.5mm width
- 2.6mm gap
- 53g
## The Cog - Tan - $25
This Cog also didn’t fit the Butterfly axle, and not has a 1/4” wooden dowel axle. Slimline.
- 56mm diameter
- 31.5mm wide
- 45g
## Cardigans - Black and Gold, Gray and Gold - $35
The Cardigan is my attempt at delivering a premium fixed axle experience at an affordable price. It was inspired by the TMBR eH and the Wildwood Gnomad with a low walled gap. It utilizes a "tic tac response that looks like this:
Specs
- 59mm diameter
- 32mm wide
- 2.6mm gap
- 52g
- 5/16" glued wooden axle
## TPU Counterweights
These are in 4 designs. They are printed in TPU, which is a softer plastic. These are not “squishy” but are soft enough to soften the sting on the palm or the ding on the throw. $15 for the first weight, $5 for each additional weight.
Designs are:
“Nub” - a very tiny bit of squish
“Divot” - a very tiny bit of squish
“Groove Barrel” - a little squish. Most of the bunch
“Groove Bullet” - no squish
> **Sold**
>
> ## Black and Gold Cardigan - $35
>
> 
> 
> 
>
> The Cardigan is my attempt at delivering a premium fixed axle experience at an affordable price. It was inspired by the TMBR eH and the Wildwood Gnomad with a low walled gap. It utilizes a "tic tac response that looks like this:
>
> 
>
> Specs
>
> - 59mm diameter
> - 32mm wide
> - 2.6mm gap
> - 46g
> - 5/16" glued wooden axle
>
> ## Green and Gold Cardigan - $35 - SOLD
>
> 
> 
> 
>
> This Cardigan was my first attempt at a multi pass print, so the gold details are flush with the green half. I’m pretty happy with how it came out. Other details are same as the other Cardigans below.
>
> Specs
>
> - 59mm diameter
> - 32mm wide
> - 2.6mm gap
> - 46g
> - 5/16" glued wooden axle
>
> ## White and Gold Cardigan - $35 - SOLD
>
> 
> 
> 
>
> The Cardigan is my attempt at delivering a premium fixed axle experience at an affordable price. It was inspired by the TMBR eH and the Wildwood Gnomad with a low walled gap. It utilizes a "tic tac response that looks like this:
>
> 
>
> Specs
>
> - 59mm diameter
> - 32mm wide
> - 2.6mm gap
> - 49g
> - 5/16" glued wooden axle
>
> ## Mikey Cardigan - B Grade - $25 - SOLD
>
> 
> 
> 
>
> This Cardigan had an unfortunate incident during QA. I got a little glue on the axle, which I can typically work off or smooth out by wrapping a string around the axle and sawing it back and forth. In this instance, I accidentally did that with poly string, and it created three grooves in the gap (pictured above). I was planning to keep it, but after carrying it for a few days it’s still a good player, and the grooves haven’t really affected play.
>
> Specs
>
> - 59mm diameter
> - 32mm wide
> - 2.6mm gap
> - 53g
> - 5/16" glued wooden axle
>
> ## White Brute - $35
>
> 
> 
> 
>
> I had two primary goals when designing the Brute. I wanted to design something more optimized for 3D printing, which you can see in all the 45 degree angles and chamfers. I also wanted something with a similar string presence to the Spinworthy KNack, which you can feel when you play it, with similar dimensions, a fairy squared off shape, and the inclusion of a fingerspin dimple.
>
> Specs
>
> - 57mm diameter
> - 38mm wide
> - 2.6mm gap
> - 49g
> - 5/16" glued wooden axle
>
> ## Green and Gold Cardigan - $35 - TRADED
>
> 
> 
> 
>
> The Cardigan is my attempt at delivering a premium fixed axle experience at an affordable price. It was inspired by the TMBR eH and the Wildwood Gnomad with a low walled gap. It utilizes a "tic tac response that looks like this:
>
> 
>
> This particular Cardigan clocked in a bit heavier than many of my prior Cardigans at 56g.
>
> Specs
>
> - 59mm diameter
> - 32mm wide
> - 2.6mm gap
> - 56g
> - 5/16" glued wooden axle
>
> ## TMBR Replacement Axle - $15 apiece
>
> 
> 
>
> I have two printed TMBR axles for sale. These are used at your own risk; I will not be held responsible for any damage incurred on your yo-yos. I QA all of these in a TMBR This-a-way That-a-way. Please be aware that all TMBRs are unique and handmade, so this may fit yours differently than mine, and even the original axles would occasionally fly apart during play.
>
> ## Pixie - The Tommy Oliver Colorway - $15
>
> The Pixie is my take on a hot-rodded Butterfly. It’s specs are roughly the same as a Butterfly, but it also has a fingerspin dimple, rims, a 5/16" wooden axle, and my “tic tac” response. They are $15 because they aspire to the “Spirit of the Butterfly,” i.e. are cheap :D. I happen to think they’re an excellent value.
>
> 
> 
>
> ## Pixie - Black and White - $15
>
> The Pixie is my take on a hot-rodded Butterfly. It’s specs are roughly the same as a Butterfly, but it also has a fingerspin dimple, rims, a 5/16" wooden axle, and my “tic tac” response. They are $15 because they aspire to the “Spirit of the Butterfly,” i.e. are cheap :D. I happen to think they’re an excellent value.
>
> 
> 
>
> ## Pixie - Non-binary Flag - $15
>
> 
> 
>
> This was a custom, but I wasn’t sure if the halves were going to come out to the same weight (as filaments have some variation from spool to spool, and this used halves with different filaments). So I printed an extra half of each in case I had to assemble them matched up instead of mismatched. Thankfully, the custom worked out, and here is its twin. The gap is a tiny bit larger than usual for a Pixie.
>
> - 56.5mm diameter
> - 36mm wide
> - 3.1mm gap
> - 48g
>
> ## Pixies - Clean Mikey Half Swap - $15 - One Remains
>
> 
> 
>
> The Pixie is my attempt at “hot-rodding” a standard Butterfly shape. It has an extended rim and a fingerspin dimple. It features my “tic tac” response system. I intentionally price these low to adhere to the “Spirit of the Butterfly” and keep them affordable.
>
> Specs
>
> - 56.6mm diameter
> - 35mm wide
> - 2.6mm gap
> - 50g
> - 5/16” wooden axle
>
> ## Bolterfly - Green - $25
>
> 
> 
>
> This Bolterfly didn’t fit a Butterfly axle, so its axle is a 1/4” wooden dowel. The shape of a Bolt in a fixie.
>
> - 57mm diameter
> - 39mm wide
> - 54g
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [October 18, 2024, 7:03pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/2 "2024-10-18T19:03:00Z")
Mikey Cardigan and TMBR axles sold!
---
### Author:  [@TheThrowingGnome](https://forums.yoyoexpert.com/u/TheThrowingGnome)
#### Post date: [October 18, 2024, 10:25pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/3 "2024-10-18T22:25:52Z")
Tic tac response is cool. Looks like it would play somewhere between a typical 5 hole and a starburst.
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [October 19, 2024, 1:15am UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/4 "2024-10-19T01:15:44Z")
Thanks! That was the goal and I think it plays well.
---
### Author:  [@Yodaddyo](https://forums.yoyoexpert.com/u/Yodaddyo)
#### Post date: [October 19, 2024, 12:44pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/5 "2024-10-19T12:44:39Z")
Don’t sleep on these people!
I got my cardigan a few days ago and it really is an incredible fixie. It’s not just “incredible for a 3d printed yoyo”. It’s incredible. Full stop. If you enjoy fixed axle play, or are just wanting to dip your toes in, this is an excelllent yoyo for the job.
Keith, that white and gold is 👨🍳 💏 👌
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [October 19, 2024, 4:55pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/6 "2024-10-19T16:55:45Z")
Thanks! I’m so glad you’re enjoying it!
---
### Author:  [@bcorliss3](https://forums.yoyoexpert.com/u/bcorliss3)
#### Post date: [October 19, 2024, 4:57pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/7 "2024-10-19T16:57:51Z")
I personally had some stuff done by Keith and could not have been more impressed quality of both the plastic and person are of the highest order. I am super late on posting what I got but will do so soon!
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [October 20, 2024, 11:00pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/8 "2024-10-20T23:00:48Z")
Bump!
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [October 23, 2024, 5:58pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/9 "2024-10-23T17:58:18Z")
Bump!
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [October 24, 2024, 1:39pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/10 "2024-10-24T13:39:06Z")
Bump! White and gold Cardigan is pending. Black and gold Cardigan added.
---
### Author:  [@autumnbooks](https://forums.yoyoexpert.com/u/autumnbooks)
#### Post date: [October 24, 2024, 11:46pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/11 "2024-10-24T23:46:33Z")
Those colorways look clean af!
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [October 25, 2024, 2:33am UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/12 "2024-10-25T02:33:58Z")
Thanks!
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [October 26, 2024, 4:59pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/13 "2024-10-26T16:59:56Z")
Bump. More TMBR axles available.
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [October 28, 2024, 11:54pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/14 "2024-10-28T23:54:29Z")
Bump.
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [November 5, 2024, 2:32am UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/15 "2024-11-05T02:32:31Z")
Bump. Green and gold Cardigan added.
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [November 5, 2024, 8:05pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/16 "2024-11-05T20:05:54Z")
Green and gold and white and gold Cardigans have sold.
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [November 8, 2024, 6:31pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/17 "2024-11-08T18:31:46Z")
All yoyos have sold. All that remains are the TMBR axles. If you want TMBR axles but for some reason don’t want them in pink, let me know.
---
### Author:  [@Splizacular](https://forums.yoyoexpert.com/u/Splizacular)
#### Post date: [November 8, 2024, 7:17pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/18 "2024-11-08T19:17:49Z")
> [@TryCatchThrow](#):
>
> but for some reason don’t want them in pink
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [November 8, 2024, 7:43pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/19 "2024-11-08T19:43:34Z")
I’m just acknowledging that it is a color with opinions…
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [December 4, 2024, 3:34pm UTC](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921/20 "2024-12-04T15:34:55Z")
Bump. Added fresh Cardigan.
[Next page](https://forums.yoyoexpert.com/t/trycatchthrow-s-3d-printed-wares/411921.md?page=2)