# ????????
**URL:** https://forums.yoyoexpert.com/t/topic/56883
**Category:** General Yo-Yo
**Created:** [July 22, 2013, 6:30pm UTC](https://forums.yoyoexpert.com/t/topic/56883 "2013-07-22T18:30:20Z")
**Posts on this page:** 13
**Page:** 1
### Author:  [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)
#### Post date: [July 22, 2013, 6:30pm UTC](https://forums.yoyoexpert.com/t/topic/56883/1 "2013-07-22T18:30:20Z")
When i unscrew my canvas thes little wire circles fall out that look like smaller c clips?? Y?
---
### Author:  [@SaltySalvador](https://forums.yoyoexpert.com/u/SaltySalvador)
#### Post date: [July 22, 2013, 6:31pm UTC](https://forums.yoyoexpert.com/t/topic/56883/2 "2013-07-22T18:31:03Z")
You broke it.
---
### Author:  [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)
#### Post date: [July 22, 2013, 6:32pm UTC](https://forums.yoyoexpert.com/t/topic/56883/3 "2013-07-22T18:32:44Z")
> [@SaltySalvador](#):
>
> You broke it.
It still works fine…
Wait wat??
---
### Author:  [@Jake\_Elliott](https://forums.yoyoexpert.com/u/Jake_Elliott)
#### Post date: [July 22, 2013, 6:42pm UTC](https://forums.yoyoexpert.com/t/topic/56883/4 "2013-07-22T18:42:38Z")
Sounds like you stripped the threads to me.
---
### Author:  [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)
#### Post date: [July 22, 2013, 6:43pm UTC](https://forums.yoyoexpert.com/t/topic/56883/5 "2013-07-22T18:43:27Z")
> [@Jake Elliott](#):
>
> Sounds like you stripped the threads to me.
But it still has threads.
---
### Author:  [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)
#### Post date: [July 22, 2013, 6:45pm UTC](https://forums.yoyoexpert.com/t/topic/56883/6 "2013-07-22T18:45:20Z")
It also started vibing but i think the axle is bent. Ya ur right 3 threads are gone. It still works fine though
---
### Author:  [@YodaGuy5](https://forums.yoyoexpert.com/u/YodaGuy5)
#### Post date: [July 22, 2013, 6:46pm UTC](https://forums.yoyoexpert.com/t/topic/56883/7 "2013-07-22T18:46:54Z")
> [@Apollo2](#):
>
> > [@Jake Elliott](#):
> >
> > Sounds like you stripped the threads to me.
>
> But it still has threads.
It’s probably only 1 thread of the all the ones on it. You’ll be fine as long as you make sure it goes in straight from now on. Maybe do your maintenance on a level table and use a monkeyfinger tool or needles to pick out and knots around the bearing on that yoyo in the future.
---
### Author:  [@GregP](https://forums.yoyoexpert.com/u/GregP)
#### Post date: [July 22, 2013, 6:47pm UTC](https://forums.yoyoexpert.com/t/topic/56883/8 "2013-07-22T18:47:50Z")
Yeah, as much as possible do NOT unscrew that yoyo anymore.
---
### Author:  [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)
#### Post date: [July 22, 2013, 6:51pm UTC](https://forums.yoyoexpert.com/t/topic/56883/9 "2013-07-22T18:51:16Z")
Its fine the threads are strong i just put the axle in sideways by accident once
---
### Author:  [@MYNAMEISZen](https://forums.yoyoexpert.com/u/MYNAMEISZen)
#### Post date: [July 22, 2013, 7:24pm UTC](https://forums.yoyoexpert.com/t/topic/56883/10 "2013-07-22T19:24:21Z")
I did this yesterday with my Genesis. The axle was lined up perfectly too, now it won’t even screw together -\_\_-
---
### Author:  [@GregP](https://forums.yoyoexpert.com/u/GregP)
#### Post date: [July 22, 2013, 7:31pm UTC](https://forums.yoyoexpert.com/t/topic/56883/11 "2013-07-22T19:31:22Z")
That sucks, Zen. For non side-effect yoyos, it would be cool if companies borrowed Spin Dynamics’ helicoil insert idea.
---
### Author:  [@MYNAMEISZen](https://forums.yoyoexpert.com/u/MYNAMEISZen)
#### Post date: [July 22, 2013, 8:13pm UTC](https://forums.yoyoexpert.com/t/topic/56883/12 "2013-07-22T20:13:58Z")
> [@GregP](#):
>
> That sucks, Zen. For non side-effect yoyos, it would be cool if companies borrowed Spin Dynamics’ helicoil insert idea.
I know that would be great! Or if we could get some 6061 axles that would be cool too 🙂 Arn’t axles normally steel?
---
### Author:  [@yoyospirit](https://forums.yoyoexpert.com/u/yoyospirit)
#### Post date: [July 22, 2013, 8:15pm UTC](https://forums.yoyoexpert.com/t/topic/56883/13 "2013-07-22T20:15:54Z")
Get it rethreaded then. 6061 axles? No, just no. Aluminum is too weak to make an axle out of.