# Today I siliconed some Yoyos 

**URL:** <https://forums.yoyoexpert.com/t/today-i-siliconed-some-yoyos/42704>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [September 12, 2012, 9:22pm UTC](https://forums.yoyoexpert.com/t/today-i-siliconed-some-yoyos/42704 "2012-09-12T21:22:17Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\
**Post date:** [September 17, 2012, 1:27am UTC](https://forums.yoyoexpert.com/t/today-i-siliconed-some-yoyos/42704/12 "2012-09-17T01:27:31Z")

</div>

> [@Joeybob](#):
>
> > [@mullicabob](#):
> >
> > Nice job. I like the flowable as well and use it quite a bit so I’ll pass along a tip for ya. When you cut the tip of the flowable start with a razor blade until you just, and I mean just, open the hole. Now being able to apply a nice thin bead you can fill the groove and allow it to settle. You only really need to fill enough to just almost touch the sides on the way around. It’ll flow out and then you don’t even need the pick or mess around with peeling of the excess. Much cleaner and less waste.
> 
> also when you do that you can take a pin with one of those plastic balls at the end and push it against the applicator and make an airtight seal so the silicone in the applicator doesn’t get wasted.

I’m sure Mr. Pang Know’s that part. He’s been modding yoyo’s for a good 6 or 7 years if memory serves me right. He’s got some insane mods.

Jeffrey you should start a thread showcasing your mods.

---

_[View the full topic](https://forums.yoyoexpert.com/t/today-i-siliconed-some-yoyos/42704)._