# TMBR Turner Eats string?

**URL:** <https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [April 22, 2014, 12:52am UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631 "2014-04-22T00:52:38Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![crococorey](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crococorey/32/1380_2.png) [@crococorey](https://forums.yoyoexpert.com/u/crococorey)\
**Post date:** [April 22, 2014, 12:52am UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/1 "2014-04-22T00:52:38Z")

</div>

Hey! My TMBR Turner (that I got in a trade today) ate and snapped 2 cotton strings today… I don’t know why, but it sure is annoying. Do all of them do this, or is there something wrong with mine? I love it and I want to use it alot, but i’m scared i’m gunna hurt it when it flies off the string after the string snaps.

---

<div class="post-metadata">

**Author:** ![crococorey](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crococorey/32/1380_2.png) [@crococorey](https://forums.yoyoexpert.com/u/crococorey)\
**Post date:** [April 22, 2014, 2:47pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/2 "2014-04-22T14:47:52Z")

</div>

Or, like, do all fixed axle throws do this? Do I just need better strings?

---

<div class="post-metadata">

**Author:** ![Jgarcia05](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@Jgarcia05](https://forums.yoyoexpert.com/u/Jgarcia05)\
**Post date:** [April 22, 2014, 2:53pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/3 "2014-04-22T14:53:53Z")

</div>

You should try and see if there’s any sharp or prices that are rough and damaging the string. You should be fine with the normal cotton strings your using.

Roughly how long would you say a string lasts??

---

<div class="post-metadata">

**Author:** ![Nathan](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nathan/32/191605_2.png) [@Nathan](https://forums.yoyoexpert.com/u/Nathan)\
**Post date:** [April 22, 2014, 3:03pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/4 "2014-04-22T15:03:13Z")

</div>

Have you played fixed axle before this?

---

<div class="post-metadata">

**Author:** ![crococorey](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crococorey/32/1380_2.png) [@crococorey](https://forums.yoyoexpert.com/u/crococorey)\
**Post date:** [April 22, 2014, 3:11pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/5 "2014-04-22T15:11:01Z")

</div>

> [@Nathan](#):
>
> Have you played fixed axle before this?

Butterflies and a homemade wooden one that broke. Not really, but I know how to do basic stalls and playing around.

---

<div class="post-metadata">

**Author:** ![crococorey](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crococorey/32/1380_2.png) [@crococorey](https://forums.yoyoexpert.com/u/crococorey)\
**Post date:** [April 22, 2014, 3:14pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/6 "2014-04-22T15:14:52Z")

</div>

> [@Jgarcia05](#):
>
> You should try and see if there’s any sharp or prices that are rough and damaging the string. You should be fine with the normal cotton strings your using.
> 
> Roughly how long would you say a string lasts??

Well one lasted maybe 15 minutes of play, the other one maybe a half hour.

---

<div class="post-metadata">

**Author:** ![Jgarcia05](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@Jgarcia05](https://forums.yoyoexpert.com/u/Jgarcia05)\
**Post date:** [April 22, 2014, 3:25pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/7 "2014-04-22T15:25:32Z")

</div>

Dang, they should last longer then that. Where exactly is the string breaking at?

---

<div class="post-metadata">

**Author:** ![crococorey](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crococorey/32/1380_2.png) [@crococorey](https://forums.yoyoexpert.com/u/crococorey)\
**Post date:** [April 22, 2014, 3:28pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/8 "2014-04-22T15:28:15Z")

</div>

Right in the middle of the loop at the bottom.

---

<div class="post-metadata">

**Author:** ![Jgarcia05](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@Jgarcia05](https://forums.yoyoexpert.com/u/Jgarcia05)\
**Post date:** [April 22, 2014, 3:31pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/9 "2014-04-22T15:31:41Z")

</div>

> [@crococorey](#):
>
> Right in the middle of the loop at the bottom.

Hmm… That’s where they would normally break but not that quick. Is that throw one that can be taken apart?

---

<div class="post-metadata">

**Author:** ![crococorey](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crococorey/32/1380_2.png) [@crococorey](https://forums.yoyoexpert.com/u/crococorey)\
**Post date:** [April 22, 2014, 3:37pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/10 "2014-04-22T15:37:50Z")

</div>

> [@Jgarcia05](#):
>
> Hmm… That’s where they would normally break but not that quick. Is that throw one that can be taken apart?

Yes.

This is what the axle looks like. The little indent is right where the strings goes when you play. IDK if that’s supposed to be there or not.  
[http://i1317.photobucket.com/albums/t634/crococorey/B7BB99DA-9394-44F1-97E3-A80369F01652\_zpskoqcl8k6.jpg](http://s1317.photobucket.com/user/crococorey/media/B7BB99DA-9394-44F1-97E3-A80369F01652_zpskoqcl8k6.jpg.html)

---

<div class="post-metadata">

**Author:** ![GregP](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gregp/32/1192_2.png) [@GregP](https://forums.yoyoexpert.com/u/GregP)\
**Post date:** [April 22, 2014, 3:43pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/11 "2014-04-22T15:43:28Z")

</div>

It’s not playing within normal parameters at all.

Back out with your camera a bit and take another in-focus photo. :wink: If I’m seeing what I think I’m seeing, that kind of indent is a sign that your axle is burned in! That shouldn’t necessarily cause string breaking, but it’s not the intended design. I would consider a new axle sleeve. You should be able to get them here or at TMBR’s site.

If you have an insanely hard throw or a wonky string, you can theoretically break a cotton string on the first throw, but if it happens over and over again within 15 minutes to 30 minutes, something’s off. Even people with hard throws seem to make a cotton string last for an hour or so of continuous play (mine last much longer).

---

<div class="post-metadata">

**Author:** ![crococorey](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crococorey/32/1380_2.png) [@crococorey](https://forums.yoyoexpert.com/u/crococorey)\
**Post date:** [April 22, 2014, 3:53pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/12 "2014-04-22T15:53:01Z")

</div>

Awww I guess I’ll put it as a want on my BST, but I have no money and I never will to buy one :(. Well, I guess I’ll play out all my cotton strings.

---

<div class="post-metadata">

**Author:** ![Jgarcia05](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@Jgarcia05](https://forums.yoyoexpert.com/u/Jgarcia05)\
**Post date:** [April 22, 2014, 4:05pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/13 "2014-04-22T16:05:00Z")

</div>

Yeah, I think k GregP is right. Something good isn’t right. Like he said, get an axle sleeve and then go from there. That should actually solve the problem.

---

<div class="post-metadata">

**Author:** ![crococorey](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crococorey/32/1380_2.png) [@crococorey](https://forums.yoyoexpert.com/u/crococorey)\
**Post date:** [April 22, 2014, 4:17pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/14 "2014-04-22T16:17:11Z")

</div>

I can’t find the axle “sleeve” on YYE or TMBR. Would I just have to buy the axle pack?

---

<div class="post-metadata">

**Author:** ![yooldman](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yooldman/32/1213_2.png) [@yooldman](https://forums.yoyoexpert.com/u/yooldman)\
**Post date:** [April 22, 2014, 4:27pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/15 "2014-04-22T16:27:05Z")

</div>

Yeah, they only sell them in the 4 pack.

---

<div class="post-metadata">

**Author:** ![crococorey](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crococorey/32/1380_2.png) [@crococorey](https://forums.yoyoexpert.com/u/crococorey)\
**Post date:** [April 22, 2014, 4:28pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/16 "2014-04-22T16:28:56Z")

</div>

> [@yooldman](#):
>
> Yeah, they only sell them in the 4 pack.

Ok. I’m gunna put them as a want on my BST. Maybe people have extra that they’ll trade me.

But I don’t even know how to change the axles, so I wouldn’t know what to do anyway. Do I need a special tool?

---

<div class="post-metadata">

**Author:** ![yooldman](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yooldman/32/1213_2.png) [@yooldman](https://forums.yoyoexpert.com/u/yooldman)\
**Post date:** [April 22, 2014, 4:33pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/17 "2014-04-22T16:33:33Z")

</div>

No special tool required. Just hold the axle sleeve firmly and pull it off the axle. If it doesn’t want to come off give it a twist while pulling.

---

<div class="post-metadata">

**Author:** ![Steven](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/steven/32/1502_2.png) [@Steven](https://forums.yoyoexpert.com/u/Steven)\
**Post date:** [April 22, 2014, 4:37pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/18 "2014-04-22T16:37:31Z")

</div>

If that doesn’t work I’d use pliers since you have concluded that it’s broke, and if you want to save the axle put something around the pliers(like an old rag or electrical tape). They also sell a tool i think ([TMBR Axle Puller – YoYoExpert](http://shop.yoyoexpert.com/product/1065/TMBR-Axle-Puller)) not sure if it would work for this though since I don’t own a TMBR or the tool.

---

<div class="post-metadata">

**Author:** ![crococorey](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/crococorey/32/1380_2.png) [@crococorey](https://forums.yoyoexpert.com/u/crococorey)\
**Post date:** [April 22, 2014, 4:38pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/19 "2014-04-22T16:38:12Z")

</div>

Hey just an idea- May be really stupid because IDK what I’m talking about- Is it possible to just take it out and put it in backwards so the bad burned part is out of the way on the other side.

---

<div class="post-metadata">

**Author:** ![yooldman](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yooldman/32/1213_2.png) [@yooldman](https://forums.yoyoexpert.com/u/yooldman)\
**Post date:** [April 22, 2014, 4:45pm UTC](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631/20 "2014-04-22T16:45:25Z")

</div>

The same part of the sleeve will still be exposed even if you turn it around.

[Next page](https://forums.yoyoexpert.com/t/tmbr-turner-eats-string/65631.md?page=2)
