# They are ready... **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [February 9, 2011, 12:30am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598 "2011-02-09T00:30:04Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![CaliBuddha](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/calibuddha/32/156_2.png) [@CaliBuddha](https://forums.yoyoexpert.com/u/CaliBuddha)\ **Post date:** [February 9, 2011, 12:30am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/1 "2011-02-09T00:30:04Z")
![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/8/3/d/83d8f9a0436ac4456794d93b49f65a7891974058.jpeg) 🙂 Available in two options: large bearing/ small bearing large bearing/ metric bearing Whichever combo you prefer. ---
**Author:** ![jtman562](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jtman562/32/285_2.png) [@jtman562](https://forums.yoyoexpert.com/u/jtman562)\ **Post date:** [February 9, 2011, 12:50am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/2 "2011-02-09T00:50:28Z")
They’re tools yes? ---
**Author:** ![yoyoingmonkey](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoingmonkey/32/86_2.png) [@yoyoingmonkey](https://forums.yoyoexpert.com/u/yoyoingmonkey)\ **Post date:** [February 9, 2011, 12:55am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/3 "2011-02-09T00:55:48Z")
what is it for? ---
**Author:** ![jtman562](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jtman562/32/285_2.png) [@jtman562](https://forums.yoyoexpert.com/u/jtman562)\ **Post date:** [February 9, 2011, 1:06am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/4 "2011-02-09T01:06:05Z")
I think for taking out bearings ---
**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\ **Post date:** [February 9, 2011, 3:30am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/5 "2011-02-09T03:30:45Z")
> [@jtman562](#): > > They’re tools yes? > [@yoyoingmonkey](#): > > what is it for? > [@jtman562](#): > > I think for taking out bearings Yes to all of the above. ---
**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\ **Post date:** [February 9, 2011, 5:02am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/6 "2011-02-09T05:02:08Z")
I love my Ti Brute! ---
**Author:** ![SocksWthSandals](https://avatars.discourse-cdn.com/v4/letter/s/eb9ed0/32.png) [@SocksWthSandals](https://forums.yoyoexpert.com/u/SocksWthSandals)\ **Post date:** [February 9, 2011, 6:09am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/7 "2011-02-09T06:09:05Z")
drill a small hole twards the upper middle so i can put a key ring on it and i will buy one 🙂 ---
**Author:** ![cameron](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cameron/32/307_2.png) [@cameron](https://forums.yoyoexpert.com/u/cameron)\ **Post date:** [February 9, 2011, 6:17am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/8 "2011-02-09T06:17:43Z")
> [@SocksWthSandals](#): > > drill a small hole twards the upper middle so i can put a key ring on it and i will buy one 🙂 I agree (Happy Icthus?) Lol this is a joke if it doesn’t transfer well over internet, I don’t intend on it being rude. ---
**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\ **Post date:** [February 9, 2011, 2:02pm UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/9 "2011-02-09T14:02:51Z")
haha It’s all good little brother. ---
**Author:** ![yoyojohn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyojohn/32/7911_2.png) [@yoyojohn](https://forums.yoyoexpert.com/u/yoyojohn)\ **Post date:** [February 10, 2011, 2:38am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/10 "2011-02-10T02:38:27Z")
I need one of those :wink: i nearly killed my dv888 trying to get the bearing out. ;D lol ;D ---
**Author:** ![CaliBuddha](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/calibuddha/32/156_2.png) [@CaliBuddha](https://forums.yoyoexpert.com/u/CaliBuddha)\ **Post date:** [February 10, 2011, 2:49am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/11 "2011-02-10T02:49:00Z")
Well, I am drilling a hole in the center of each end to allow for bearing removal on an axle side that the axle cannot be removed BUT on those a key ring hole would have to be in the middle of the BRT which would make it slightly awkward, maybe? On the large bearing/ small bearing option I probably won’t drill an axle hole on the small bearing side and just do the key ring hole. How’s that sound? ---
**Author:** ![SocksWthSandals](https://avatars.discourse-cdn.com/v4/letter/s/eb9ed0/32.png) [@SocksWthSandals](https://forums.yoyoexpert.com/u/SocksWthSandals)\ **Post date:** [February 10, 2011, 6:23am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/12 "2011-02-10T06:23:51Z")
> [@CaliBuddha](#): > > Well, I am drilling a hole in the center of each end to allow for bearing removal on an axle side that the axle cannot be removed BUT on those a key ring hole would have to be in the middle of the BRT which would make it slightly awkward, maybe? On the large bearing/ small bearing option I probably won’t drill an axle hole on the small bearing side and just do the key ring hole. How’s that sound? i think the hole to get a bearing thats stuck on the axel side is genius. and it wouldnt have to be in the middle would it? it could be more towards the end of the brt? id be sold then 🙂 im still kinda sold either way. you should probably set one aside for me ---
**Author:** ![Ley](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/ley/32/769_2.png) [@Ley](https://forums.yoyoexpert.com/u/Ley)\ **Post date:** [February 13, 2011, 7:13am UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/13 "2011-02-13T07:13:13Z")
When are they going to be up for shipping? I want one 😛 ---
**Author:** ![CaliBuddha](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/calibuddha/32/156_2.png) [@CaliBuddha](https://forums.yoyoexpert.com/u/CaliBuddha)\ **Post date:** [February 14, 2011, 5:21pm UTC](https://forums.yoyoexpert.com/t/they-are-ready/23598/14 "2011-02-14T17:21:57Z")
I have a few left that don’t have holes. If you’re interested in that you can get one now. PM me if interested.