# Stripped Axles

**URL:** <https://forums.yoyoexpert.com/t/stripped-axles/63802>\
**Category:** General Yo-Yo\
**Created:** [February 13, 2014, 4:48am UTC](https://forums.yoyoexpert.com/t/stripped-axles/63802 "2014-02-13T04:48:51Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dragonegs](https://avatars.discourse-cdn.com/v4/letter/d/9fc348/32.png) [@Dragonegs](https://forums.yoyoexpert.com/u/Dragonegs)\
**Post date:** [February 13, 2014, 4:48am UTC](https://forums.yoyoexpert.com/t/stripped-axles/63802/1 "2014-02-13T04:48:51Z")

</div>

So I just ano burned my Monster and then it started playing funky. I though that the axle could be stripped after a few throws and I ask, How can one tell if the threads have stripped?

---

<div class="post-metadata">

**Author:** ![YoYoJordan](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyojordan/32/123867_2.png) [@YoYoJordan](https://forums.yoyoexpert.com/u/YoYoJordan)\
**Post date:** [February 13, 2014, 4:51am UTC](https://forums.yoyoexpert.com/t/stripped-axles/63802/2 "2014-02-13T04:51:07Z")

</div>

You can tell if you can’t screw it together. Stripped axles realy only cause the problem of non-playeabilty due to the fact that there isn’t anything holding the yoyo together.

---

<div class="post-metadata">

**Author:** ![da5id](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/da5id/32/48214_2.png) [@da5id](https://forums.yoyoexpert.com/u/da5id)\
**Post date:** [February 13, 2014, 6:39am UTC](https://forums.yoyoexpert.com/t/stripped-axles/63802/3 "2014-02-13T06:39:49Z")

</div>

> [@Dragonegs](#):
>
> So I just ano burned my Monster and then it started playing funky. I though that the axle could be stripped after a few throws and I ask, How can one tell if the threads have stripped?

What is ano burned?

---

<div class="post-metadata">

**Author:** ![swiftduststorm](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/swiftduststorm/32/1460_2.png) [@swiftduststorm](https://forums.yoyoexpert.com/u/swiftduststorm)\
**Post date:** [February 13, 2014, 9:03am UTC](https://forums.yoyoexpert.com/t/stripped-axles/63802/4 "2014-02-13T09:03:50Z")

</div>

if you got a loose axle (the yoyo falls apart when playing or just is unstable) put some screw tight on it.  
however if your yoyo axle is striped(cant screw together) get a new axle.

---

<div class="post-metadata">

**Author:** ![vegabomb](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/vegabomb/32/199_2.png) [@vegabomb](https://forums.yoyoexpert.com/u/vegabomb)\
**Post date:** [February 13, 2014, 10:00am UTC](https://forums.yoyoexpert.com/t/stripped-axles/63802/5 "2014-02-13T10:00:21Z")

</div>

> [@Dragonegs](#):
>
> So I just ano burned my Monster and then it started playing funky. I though that the axle could be stripped after a few throws and I ask, How can one tell if the threads have stripped?

In almost all cases the axle is made of a harder material than the yoyo. It isn’t likely that the axle stripped. Take the yoyo apart. Reassemble the halves and align them. Attempt to put it together but first lightly turn the yoyo counter-clockwise. Do it gently until you “feel” a click. This means the threads are aligned and ready to seat properly. Close the yoyo clockwise.

As has been said by da5id I too don’t know what you mean by “ano burn”. I’m assuming you mean you smacked it on something but await your response.

---

<div class="post-metadata">

**Author:** ![oops](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/oops/32/683976_2.png) [@oops](https://forums.yoyoexpert.com/u/oops)\
**Post date:** [February 13, 2014, 12:33pm UTC](https://forums.yoyoexpert.com/t/stripped-axles/63802/6 "2014-02-13T12:33:50Z")

</div>

I’ve seen people refer to “ano burn” as what is simply an ano flaw (bleeding ano, missing ano in a spot, etc) but what OP is describing is presumably just a scuff/flatspot that removed ano but caused no physical damage.

---

<div class="post-metadata">

**Author:** ![StrippedAxle](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/strippedaxle/32/1163_2.png) [@StrippedAxle](https://forums.yoyoexpert.com/u/StrippedAxle)\
**Post date:** [February 14, 2014, 4:04pm UTC](https://forums.yoyoexpert.com/t/stripped-axles/63802/7 "2014-02-14T16:04:25Z")

</div>

You called?

No, I’m just kidding. But to see if it’s stripped, you basically have to see if it screws together or not. If it doesn’t, then it’s probably stripped.

---

<div class="post-metadata">

**Author:** ![Schnayke](https://avatars.discourse-cdn.com/v4/letter/s/f14d63/32.png) [@Schnayke](https://forums.yoyoexpert.com/u/Schnayke)\
**Post date:** [February 14, 2014, 4:08pm UTC](https://forums.yoyoexpert.com/t/stripped-axles/63802/8 "2014-02-14T16:08:00Z")

</div>

You are not going too strip an axle by simply hitting the yoyo on something.  
It happens because you cross thread the axle when you screw it together.
