# Strange vide in sOMETHING Angle **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [May 19, 2013, 1:32am UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787 "2013-05-19T01:32:50Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![Apollo2](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apollo2/32/1285_2.png) [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)\ **Post date:** [May 19, 2013, 1:32am UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/1 "2013-05-19T01:32:50Z")
I have no idea why it has a little vibe! ---
**Author:** ![xmotoby](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/xmotoby/32/1246_2.png) [@xmotoby](https://forums.yoyoexpert.com/u/xmotoby)\ **Post date:** [May 19, 2013, 1:35am UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/2 "2013-05-19T01:35:34Z")
Have you tried a yyf multi tool? If not, you could try it. Then if you can get it out, use plier’s round part to get it out. It may damage the bearing, but I’ve never had any problems with it. No idea why it vibes. ---
**Author:** ![Apollo2](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apollo2/32/1285_2.png) [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)\ **Post date:** [May 19, 2013, 1:37am UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/3 "2013-05-19T01:37:20Z")
> [@xmotoby](#): > > Have you tried a yyf multi tool? If not, you could try it. Then if you can get it out, use plier’s round part to get it out. It may damage the bearing, but I’ve never had any problems with it. No idea why it vibes. I tried pliers, and i dont have a multitool. ---
**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\ **Post date:** [May 19, 2013, 1:44am UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/4 "2013-05-19T01:44:55Z")
A Drill Bit will work… ---
**Author:** ![xmotoby](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/xmotoby/32/1246_2.png) [@xmotoby](https://forums.yoyoexpert.com/u/xmotoby)\ **Post date:** [May 19, 2013, 2:08am UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/5 "2013-05-19T02:08:01Z")
> [@Apollo2](#): > > > [@xmotoby](#): > > > > Have you tried a yyf multi tool? If not, you could try it. Then if you can get it out, use plier’s round part to get it out. It may damage the bearing, but I’ve never had any problems with it. No idea why it vibes. > > I tried pliers, and i dont have a multitool. Hmmm, then I don’t know. A drill bit would give you more leverage than a multi-tool, so that might work if you find the right size. ---
**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\ **Post date:** [May 19, 2013, 2:43am UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/6 "2013-05-19T02:43:00Z")
Go look through your parents drill bits :). Also, you have a angle? Dang… ---
**Author:** ![Apollo2](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apollo2/32/1285_2.png) [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)\ **Post date:** [May 19, 2013, 12:28pm UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/7 "2013-05-19T12:28:15Z")
Haha thx Maddog Nothing is working! ---
**Author:** ![J\_Singh\_2K](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/j_singh_2k/32/1250_2.png) [@J\_Singh\_2K](https://forums.yoyoexpert.com/u/J_Singh_2K)\ **Post date:** [May 19, 2013, 12:45pm UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/8 "2013-05-19T12:45:01Z")
> [@Apollo2](#): > > Haha thx Maddog > > Nothing is working! Put the yoyo half with the stuck bearing in the freezer for 30 minutes. Then, try the drill bit or pliers again. What happens is the aluminum yoyo shrinks faster than the stainless steel bearing when cooled, making the bearing seat a little bit looser until the yoyo gets back to room temperature. ---
**Author:** ![Apollo2](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apollo2/32/1285_2.png) [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)\ **Post date:** [May 19, 2013, 1:03pm UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/9 "2013-05-19T13:03:50Z")
> [@J\_Singh\_2K](#): > > > [@Apollo2](#): > > > > Haha thx Maddog > > > > Nothing is working! > > Put the yoyo half with the stuck bearing in the freezer for 30 minutes. Then, try the drill bit or pliers again. What happens is the aluminum yoyo shrinks faster than the stainless steel bearing when cooled, making the bearing seat a little bit looser until the yoyo gets back to room temperature. Thx but i just got it! Had to work at it for like 20 mins… Vibe is still there! I have switched axles/ bearings and it isnt helping! ---
**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\ **Post date:** [May 19, 2013, 1:08pm UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/10 "2013-05-19T13:08:28Z")
> [@Apollo2](#): > > > [@J\_Singh\_2K](#): > > > > > [@Apollo2](#): > > > > > > Haha thx Maddog > > > > > > Nothing is working! > > > > Put the yoyo half with the stuck bearing in the freezer for 30 minutes. Then, try the drill bit or pliers again. What happens is the aluminum yoyo shrinks faster than the stainless steel bearing when cooled, making the bearing seat a little bit looser until the yoyo gets back to room temperature. > > Thx but i just got it! Had to work at it for like 20 mins… Vibe is still there! I have switched axles/ bearings and it isnt helping! Where did you get it? BST Yoyoexpert? Whoever you got it from probably fell out of a tree on the yoyo or stepped on it ;). My DV888 has wobble and vibe, but a new axle or bearing does nothing. ---
**Author:** ![Apollo2](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apollo2/32/1285_2.png) [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)\ **Post date:** [May 19, 2013, 1:26pm UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/11 "2013-05-19T13:26:25Z")
> [@Bcmaddog](#): > > > [@Apollo2](#): > > > > > [@J\_Singh\_2K](#): > > > > > > > [@Apollo2](#): > > > > > > > > Haha thx Maddog > > > > > > > > Nothing is working! > > > > > > Put the yoyo half with the stuck bearing in the freezer for 30 minutes. Then, try the drill bit or pliers again. What happens is the aluminum yoyo shrinks faster than the stainless steel bearing when cooled, making the bearing seat a little bit looser until the yoyo gets back to room temperature. > > > > Thx but i just got it! Had to work at it for like 20 mins… Vibe is still there! I have switched axles/ bearings and it isnt helping! > > Where did you get it? > BST > Yoyoexpert? > > Whoever you got it from probably fell out of a tree on the yoyo or stepped on it ;). My DV888 has wobble and vibe, but a new axle or bearing does nothing. BST, got it for my puffin. Its a SUPER tiny vibe but its noticable. ---
**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\ **Post date:** [May 19, 2013, 3:00pm UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/12 "2013-05-19T15:00:04Z")
> [@Apollo2](#): > > > [@Bcmaddog](#): > > > > > [@Apollo2](#): > > > > > > > [@J\_Singh\_2K](#): > > > > > > > > > [@Apollo2](#): > > > > > > > > > > Haha thx Maddog > > > > > > > > > > Nothing is working! > > > > > > > > Put the yoyo half with the stuck bearing in the freezer for 30 minutes. Then, try the drill bit or pliers again. What happens is the aluminum yoyo shrinks faster than the stainless steel bearing when cooled, making the bearing seat a little bit looser until the yoyo gets back to room temperature. > > > > > > Thx but i just got it! Had to work at it for like 20 mins… Vibe is still there! I have switched axles/ bearings and it isnt helping! > > > > Where did you get it? > > BST > > Yoyoexpert? > > > > Whoever you got it from probably fell out of a tree on the yoyo or stepped on it ;). My DV888 has wobble and vibe, but a new axle or bearing does nothing. > > BST, got it for my puffin. Its a SUPER tiny vibe but its noticable. Does it really bother you that much? Gosh, my favorite throw is a DV888 with wobble and bad vibe. I don’t care it plays the way I like. ---
**Author:** ![sparhawk](https://avatars.discourse-cdn.com/v4/letter/s/94ad74/32.png) [@sparhawk](https://forums.yoyoexpert.com/u/sparhawk)\ **Post date:** [May 19, 2013, 9:11pm UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/13 "2013-05-19T21:11:56Z")
> [@Apollo2](#): > > > [@Bcmaddog](#): > > > > > [@Apollo2](#): > > > > > > > [@J\_Singh\_2K](#): > > > > > > > > > [@Apollo2](#): > > > > > > > > > > Haha thx Maddog > > > > > > > > > > Nothing is working! > > > > > > > > Put the yoyo half with the stuck bearing in the freezer for 30 minutes. Then, try the drill bit or pliers again. What happens is the aluminum yoyo shrinks faster than the stainless steel bearing when cooled, making the bearing seat a little bit looser until the yoyo gets back to room temperature. > > > > > > Thx but i just got it! Had to work at it for like 20 mins… Vibe is still there! I have switched axles/ bearings and it isnt helping! > > > > Where did you get it? > > BST > > Yoyoexpert? > > > > Whoever you got it from probably fell out of a tree on the yoyo or stepped on it ;). My DV888 has wobble and vibe, but a new axle or bearing does nothing. > > BST, got it for my puffin. Its a SUPER tiny vibe but its noticable. sounds like it was just part of the yoyo due to a tolerance issue that won’t be fixed ---
**Author:** ![PlasticWhip](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/plasticwhip/32/896_2.png) [@PlasticWhip](https://forums.yoyoexpert.com/u/PlasticWhip)\ **Post date:** [May 19, 2013, 11:47pm UTC](https://forums.yoyoexpert.com/t/strange-vide-in-something-angle/53787/14 "2013-05-19T23:47:20Z")
> [@Apollo2](#): > > > [@J\_Singh\_2K](#): > > > > > [@Apollo2](#): > > > > > > Haha thx Maddog > > > > > > Nothing is working! > > > > Put the yoyo half with the stuck bearing in the freezer for 30 minutes. Then, try the drill bit or pliers again. What happens is the aluminum yoyo shrinks faster than the stainless steel bearing when cooled, making the bearing seat a little bit looser until the yoyo gets back to room temperature. > > Thx but i just got it! Had to work at it for like 20 mins… Vibe is still there! I have switched axles/ bearings and it isnt helping! You shoulda mentioned this earlier. I could have saved you a ton of time.