# Stainless SE's **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [September 20, 2014, 9:23pm UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558 "2014-09-20T21:23:38Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![mullicabob](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mullicabob/32/1108_2.png) [@mullicabob](https://forums.yoyoexpert.com/u/mullicabob)\ **Post date:** [September 20, 2014, 9:23pm UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558/1 "2014-09-20T21:23:38Z")
Messing around with the lathe a while ago and never got around to putting up a pic. Personal use SE made of stainless. ---
**Author:** ![DrAwesome](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/drawesome/32/1139_2.png) [@DrAwesome](https://forums.yoyoexpert.com/u/DrAwesome)\ **Post date:** [September 20, 2014, 9:28pm UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558/2 "2014-09-20T21:28:52Z")
Have you considered/tried making se’s that have a divot for fingerspins? A load of people have asked for em. Those look like they would do well for pull starts and the like. Awesome job. ---
**Author:** ![mullicabob](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mullicabob/32/1108_2.png) [@mullicabob](https://forums.yoyoexpert.com/u/mullicabob)\ **Post date:** [September 20, 2014, 11:23pm UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558/3 "2014-09-20T23:23:53Z")
I have all kinds of niffty ideas for SE’s. These are/were just trial runs for size and my tooling. ---
**Author:** ![DrAwesome](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/drawesome/32/1139_2.png) [@DrAwesome](https://forums.yoyoexpert.com/u/DrAwesome)\ **Post date:** [September 21, 2014, 12:46am UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558/4 "2014-09-21T00:46:25Z")
Great. Can’t wait to see what you have in store. ---
**Author:** ![da5id](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/da5id/32/48214_2.png) [@da5id](https://forums.yoyoexpert.com/u/da5id)\ **Post date:** [September 21, 2014, 10:05pm UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558/5 "2014-09-21T22:05:14Z")
> [@mullicabob](#): > > I have all kinds of niffty ideas for SE’s. These are/were just trial runs for size and my tooling. Show us a pic of the business end 🙂 ---
**Author:** ![mullicabob](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mullicabob/32/1108_2.png) [@mullicabob](https://forums.yoyoexpert.com/u/mullicabob)\ **Post date:** [September 21, 2014, 11:15pm UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558/6 "2014-09-21T23:15:48Z")
> [@da5id](#): > > Show us a pic of the business end 🙂 That’s a blank and was just parted off. The new set is in the chuck now and will be worked on at a leisurely pace over the next week or two. Most likely will be a little different design like Dr. Awesome mentioned above. ---
**Author:** ![YoYoYakuza](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoyakuza/32/169435_2.png) [@YoYoYakuza](https://forums.yoyoexpert.com/u/YoYoYakuza)\ **Post date:** [September 22, 2014, 12:50pm UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558/7 "2014-09-22T12:50:33Z")
DUDE! Tungsten SE’s! ---
**Author:** ![da5id](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/da5id/32/48214_2.png) [@da5id](https://forums.yoyoexpert.com/u/da5id)\ **Post date:** [September 22, 2014, 5:41pm UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558/8 "2014-09-22T17:41:45Z")
> [@mullicabob](#): > > That’s a blank and was just parted off. The new set is in the chuck now and will be worked on at a leisurely pace over the next week or two. Most likely will be a little different design like Dr. Awesome mentioned above. We make them the opposite way. The business end is completed first and then the ‘blank’ can be turned into a variety of shapes. ---
**Author:** ![mullicabob](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mullicabob/32/1108_2.png) [@mullicabob](https://forums.yoyoexpert.com/u/mullicabob)\ **Post date:** [September 22, 2014, 6:57pm UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558/9 "2014-09-22T18:57:46Z")
> [@da5id](#): > > We make them the opposite way. The business end is completed first and then the ‘blank’ can be turned into a variety of shapes. That’s how they will be done from here on out. This was just for dimensions. ---
**Author:** ![qpwoei12](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/qpwoei12/32/396_2.png) [@qpwoei12](https://forums.yoyoexpert.com/u/qpwoei12)\ **Post date:** [September 30, 2014, 3:25am UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558/10 "2014-09-30T03:25:57Z")
Titanium Disk SE’s for the sole purpose of sparking? Take a rock to your yoyo xD ---
**Author:** ![YoCyanightYo](https://avatars.discourse-cdn.com/v4/letter/y/77aa72/32.png) [@YoCyanightYo](https://forums.yoyoexpert.com/u/YoCyanightYo)\ **Post date:** [September 30, 2014, 4:33am UTC](https://forums.yoyoexpert.com/t/stainless-ses/69558/11 "2014-09-30T04:33:41Z")
If you made those fingerspin SE’s I think I’d buy a pair You could make them like the dip/axle hole in the ET Elysians cup