# Stacked Lynn Fury **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [June 17, 2011, 3:20am UTC](https://forums.yoyoexpert.com/t/stacked-lynn-fury/27364 "2011-06-17T03:20:07Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![YoYoBozo](https://avatars.discourse-cdn.com/v4/letter/y/e47774/32.png) [@YoYoBozo](https://forums.yoyoexpert.com/u/YoYoBozo)\ **Post date:** [June 17, 2011, 3:20am UTC](https://forums.yoyoexpert.com/t/stacked-lynn-fury/27364/1 "2011-06-17T03:20:07Z")
I accidentally overtightened my fury and cracked the center protruding molded plastic nubs; so I decided to put it on a lathe and sand down the nubs to the axle opening. I purchased a longer bolt from lowe’s for an axle and used some A size bearings and gold duncan spacers to slip over the protruding axle. I used an e-clip (also from lowes) to keep the bearing from sliding of the axle, and then finally, I topped the bearing with some standard yoyofactory hubs:) While I was in modding mode, I decided to sateen the yo as well. I am very pleased with its look, feel and performance. Moral of the story, any yoyo can be hubstacked when there is a will and a little ingenuity. ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/b/6/c/b6c8dcfaa65270adad8fbcfb12396e3acc8508b5.jpeg) ---
**Author:** ![AngryGumball](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/angrygumball/32/683872_2.png) [@AngryGumball](https://forums.yoyoexpert.com/u/AngryGumball)\ **Post date:** [June 17, 2011, 5:16am UTC](https://forums.yoyoexpert.com/t/stacked-lynn-fury/27364/2 "2011-06-17T05:16:58Z")
Cool stuff! I’ve been wanting to try a hubstacked yoyo for some time now. I’m thinking of somehow stacking one of my Freehands (something I can easily undo if I don’t like it). ---
**Author:** ![YoYoBozo](https://avatars.discourse-cdn.com/v4/letter/y/e47774/32.png) [@YoYoBozo](https://forums.yoyoexpert.com/u/YoYoBozo)\ **Post date:** [June 17, 2011, 6:25am UTC](https://forums.yoyoexpert.com/t/stacked-lynn-fury/27364/3 "2011-06-17T06:25:13Z")
Should be pretty easy to stack A FH. Just tAke it with you to lowes or hdepot and browse the hardware section for a long machine screw that would make a good axle. You will also need a couple of Duncan spacers and a bearings. For the caps be creative, drill a bearing sized hole in a die or just slip a pencil top eraser over the bearing. Happy modding; dont forget to post pics:) ---
**Author:** ![skeletonboy333](https://avatars.discourse-cdn.com/v4/letter/s/b2d939/32.png) [@skeletonboy333](https://forums.yoyoexpert.com/u/skeletonboy333)\ **Post date:** [June 17, 2011, 8:49am UTC](https://forums.yoyoexpert.com/t/stacked-lynn-fury/27364/4 "2011-06-17T08:49:45Z")
Ooh, nice and sweet! ---
**Author:** ![ItzChris](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/itzchris/32/540_2.png) [@ItzChris](https://forums.yoyoexpert.com/u/ItzChris)\ **Post date:** [June 17, 2011, 11:36pm UTC](https://forums.yoyoexpert.com/t/stacked-lynn-fury/27364/5 "2011-06-17T23:36:48Z")
SICK. can we see more pics ? ;D ---
**Author:** ![YoYoBozo](https://avatars.discourse-cdn.com/v4/letter/y/e47774/32.png) [@YoYoBozo](https://forums.yoyoexpert.com/u/YoYoBozo)\ **Post date:** [June 18, 2011, 12:05am UTC](https://forums.yoyoexpert.com/t/stacked-lynn-fury/27364/6 "2011-06-18T00:05:10Z")
another angle ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/a/5/6/a5683fd6de53733c3e608689959973d74ffcf02e.jpeg) ---
**Author:** ![ItzChris](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/itzchris/32/540_2.png) [@ItzChris](https://forums.yoyoexpert.com/u/ItzChris)\ **Post date:** [June 18, 2011, 5:55pm UTC](https://forums.yoyoexpert.com/t/stacked-lynn-fury/27364/7 "2011-06-18T17:55:20Z")
That thing is crazy awesome. Did you drill a hole to fit the axle through? ---
**Author:** ![YoYoBozo](https://avatars.discourse-cdn.com/v4/letter/y/e47774/32.png) [@YoYoBozo](https://forums.yoyoexpert.com/u/YoYoBozo)\ **Post date:** [June 19, 2011, 3:55am UTC](https://forums.yoyoexpert.com/t/stacked-lynn-fury/27364/8 "2011-06-19T03:55:52Z")
if you sand the molded plastic nub down far enough, you will reach the factory drilled axle opening; there is no need to drill a hole:)