# Spinworthy Flying Lemon - coming early 2025 **URL:** \ **Category:** Manufacturer Official News\ **Created:** [December 7, 2024, 12:28am UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780 "2024-12-07T00:28:14Z")\ **Posts on this page:** 20\ **Page:** 17
**Author:** ![Cdl12b](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cdl12b/32/659678_2.png) [@Cdl12b](https://forums.yoyoexpert.com/u/Cdl12b)\ **Post date:** [August 10, 2025, 9:57pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/326 "2025-08-10T21:57:11Z")
Do you think that there are going to be extra bearings for purchase in the future? I’ve been eager to design something for one of the 4mm MR85 bearings ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [August 10, 2025, 10:16pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/327 "2025-08-10T22:16:57Z")
I can point you to the factory that made them. I had them make 100 for me a little while ago. kudus to Glen though because I’ve made dozens of 3d printed designs using the bearings and not one of them has worked. They all suck :joy: but the lemon is great. ---
**Author:** ![anon5341354](https://avatars.discourse-cdn.com/v4/letter/a/3ab097/32.png) [@anon5341354](https://forums.yoyoexpert.com/u/anon5341354)\ **Post date:** [August 10, 2025, 10:26pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/328 "2025-08-10T22:26:42Z")
Design for the this bearing is fairly knife-edge. You really need to refine the weight and dimensions very precisely for a design to work with it. C bearing stuff is more set and forget, so to speak. ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [August 10, 2025, 10:32pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/329 "2025-08-10T22:32:23Z")
Yeah I 100% couldn’t adapt any of my c or d bearing designs to it :joy: most designs I try end up either 1. Losing power almost immediately 2. Being wildly responsive even with immaculate clean bearings and pads recessed like 2 mm. 3. Vibing to heck and back. I initially got frustrated so I’ve kinda shelved the idea and just randomly when I get bored try again here and there. ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [August 10, 2025, 10:38pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/330 "2025-08-10T22:38:10Z")
But anyway if you want to get an order of bearings talk to Jack at Zhangzhou Runstar Bearings. You can order and message through AliBaba. You will be looking at about $120 shipped before tariffs for 100 bearings. ---
**Author:** ![Cdl12b](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cdl12b/32/659678_2.png) [@Cdl12b](https://forums.yoyoexpert.com/u/Cdl12b)\ **Post date:** [August 10, 2025, 11:54pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/331 "2025-08-10T23:54:55Z")
Probably won’t make this, and if I did, it probably wouldn’t work, but I threw this together after making a seat for an MR85. Made it really wonkily shaped ![profile](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/0/f/c0f126f2890cab4596e484f91310bf4120379827.png) ---
**Author:** ![anon5341354](https://avatars.discourse-cdn.com/v4/letter/a/3ab097/32.png) [@anon5341354](https://forums.yoyoexpert.com/u/anon5341354)\ **Post date:** [August 11, 2025, 2:04am UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/332 "2025-08-11T02:04:27Z")
How wide is it? ---
**Author:** ![Cdl12b](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cdl12b/32/659678_2.png) [@Cdl12b](https://forums.yoyoexpert.com/u/Cdl12b)\ **Post date:** [August 11, 2025, 2:44am UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/333 "2025-08-11T02:44:26Z")
Decently wide. ~49mm wide with a standard 56mm diameter. Not at all optimized for the bearing size ---
**Author:** ![Snoopy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/snoopy/32/669143_2.png) [@Snoopy](https://forums.yoyoexpert.com/u/Snoopy)\ **Post date:** [August 11, 2025, 3:46am UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/334 "2025-08-11T03:46:48Z")
Reminds me a bit of the YoYoWorkshop Cthulhu. ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/9/1/8/918c1c29479960611ad7c9de40516af83d60779a.png) ---
**Author:** ![anon5341354](https://avatars.discourse-cdn.com/v4/letter/a/3ab097/32.png) [@anon5341354](https://forums.yoyoexpert.com/u/anon5341354)\ **Post date:** [August 11, 2025, 5:46am UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/335 "2025-08-11T05:46:12Z")
At that diameter the throw won’t feel right and have kick back shin-hunting tendencies. It’s also far too wide and wobble so much it will almost be hypnotic, although the generous centreweight will mitigate that somewhat. ---
**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\ **Post date:** [August 11, 2025, 1:57pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/336 "2025-08-11T13:57:37Z")
I’ve struggled even with standard width MR85 and plastic bearing seats, in large part because the inner race is so thin. Doesn’t take much for one side to press/cut into the plastic slightly and cause issues. Less issues with shields removed, but still issues. Usually they’ll be fine for a while, but after a few hours of play they start vibing or stop spinning as long. I’ve had much better luck stepping down to MR84 which has thicker races and more space between the races (and a 3mm axle so that there’s still a bearing post). ---
**Author:** ![kretzschmar](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kretzschmar/32/668707_2.png) [@kretzschmar](https://forums.yoyoexpert.com/u/kretzschmar)\ **Post date:** [August 11, 2025, 2:05pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/337 "2025-08-11T14:05:03Z")
I may have asked this so please forgive me for the double question. The copper and steal infused plastic, has anyone tried using that for just the bearing seat with any success on the MR85, with the denser material not being able to be cut into by the bearing? And @MinerJ , whatever that clear plastic you have used in Nectars, it seems to really hold up well ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [August 11, 2025, 2:09pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/338 "2025-08-11T14:09:48Z")
I exclusively use m3 hardware to give me more room for the same reason. For printing test runs of the mr85 wide I switched to polycarbonate prints for strength so that the seat doesn’t fall apart, it reduced a lot of the vibe problems but the designs all still lose power crazy fast or are super responsive. Trickiest bearing to design for ever. ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [August 11, 2025, 2:11pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/339 "2025-08-11T14:11:11Z")
The metal powder filament is actually weaker in bearing seats. I tried making bearing seats out of it and they always failed. That’s actually why the waffle stomper is split into two materials. The first prototype was all metal filled. ---
**Author:** ![kretzschmar](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kretzschmar/32/668707_2.png) [@kretzschmar](https://forums.yoyoexpert.com/u/kretzschmar)\ **Post date:** [August 11, 2025, 2:16pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/340 "2025-08-11T14:16:10Z")
Thank you for the follow up :heart: ---
**Author:** ![Captrogers](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/captrogers/32/647012_2.png) [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)\ **Post date:** [August 11, 2025, 2:46pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/341 "2025-08-11T14:46:22Z")
Generally any filled filament is harder to print and harder to get fine details with. Such a thin seat would probably have more failures in a metal filled filament ---
**Author:** ![Cdl12b](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cdl12b/32/659678_2.png) [@Cdl12b](https://forums.yoyoexpert.com/u/Cdl12b)\ **Post date:** [August 11, 2025, 10:06pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/342 "2025-08-11T22:06:11Z")
![mini85](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/8/9/0/890532a0c83c21c42eedbfbdd11328b63c446d98.png) Not sure if this is too light, but I made a shutter inspired undersized design. 51g, 50.2mm diameter, 42mm wide ---
**Author:** ![anon5341354](https://avatars.discourse-cdn.com/v4/letter/a/3ab097/32.png) [@anon5341354](https://forums.yoyoexpert.com/u/anon5341354)\ **Post date:** [August 11, 2025, 10:08pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/343 "2025-08-11T22:08:41Z")
That will work much better. 🙂 Yes, it will be a bit too light though. ---
**Author:** ![pyrotechnic](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/pyrotechnic/32/689058_2.png) [@pyrotechnic](https://forums.yoyoexpert.com/u/pyrotechnic)\ **Post date:** [August 13, 2025, 3:02pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/344 "2025-08-13T15:02:31Z")
[https://www.instagram.com/reel/DNL2ClYSvW9/?igsh=dHQ0eDN4MmJ4Mzhm](https://www.instagram.com/reel/DNL2ClYSvW9/?igsh=dHQ0eDN4MmJ4Mzhm) . ---
**Author:** ![Son-of-Morris](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/son-of-morris/32/250533_2.png) [@Son-of-Morris](https://forums.yoyoexpert.com/u/Son-of-Morris)\ **Post date:** [August 13, 2025, 3:06pm UTC](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780/345 "2025-08-13T15:06:24Z")
Haha, I totally thought you just had it on loop for a minute there, killer! [Previous page](https://forums.yoyoexpert.com/t/spinworthy-flying-lemon-coming-early-2025/414780.md?page=16)