# some modding questions **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [September 6, 2011, 11:24pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737 "2011-09-06T23:24:41Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![hotrodyoyoer](https://avatars.discourse-cdn.com/v4/letter/h/b5a626/32.png) [@hotrodyoyoer](https://forums.yoyoexpert.com/u/hotrodyoyoer)\ **Post date:** [September 6, 2011, 11:24pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/1 "2011-09-06T23:24:41Z")
1.what is a beef cake mod and how do you do it?how does it help 2.how do you highwall a throw and what does it do? 3.is it possible to keep duncan bearings from rusting? 4.is it possible to put z stacks on a metal drifter?if so how hard would it be to do? 5.would z stack fit on a pgm? ---
**Author:** ![dynikus](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dynikus/32/812_2.png) [@dynikus](https://forums.yoyoexpert.com/u/dynikus)\ **Post date:** [September 6, 2011, 11:39pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/2 "2011-09-06T23:39:36Z")
1. 2 bearings. not sure how it’s done. I’d guess longer axle though. 2. not sure 3. Sure, why not? they’re the same as other bearings. 4. no clue. maybe you’re just in a high humidity place? or near the beach? Also I’ve heard a way to keep moisture away from the bearing is to store the yoyo with the string unwound. string keeps in moisture. ---
**Author:** ![PlasticWhip](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/plasticwhip/32/896_2.png) [@PlasticWhip](https://forums.yoyoexpert.com/u/PlasticWhip)\ **Post date:** [September 7, 2011, 1:17am UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/3 "2011-09-07T01:17:09Z")
1.  You take away from the inside of the yoyo. > **[Beefcake](https://yoyo.fandom.com/wiki/Beefcake)** > > Beefcaking is a mod that involves adding an additional bearing to a yo-yo to widen its string gap to allow for advanced, low-responsive string tricks. Although most yo-yos can be beefcaked, very few can actually benefit from the addition of an extra... 2.  I use a file or wide lathe tool.  Makes it better for 5a.  Not sure how though. _Hopes someone will tell why highwalling is good for 5a_ 3.  Easily, Dry them after cleaning them. 4.  If the solvent you use is hydroponic (attracts water) than you need to make sure it is 100% dry.  One hydroponic solvent is denatured alcohol (I use). ---
**Author:** ![hotrodyoyoer](https://avatars.discourse-cdn.com/v4/letter/h/b5a626/32.png) [@hotrodyoyoer](https://forums.yoyoexpert.com/u/hotrodyoyoer)\ **Post date:** [September 7, 2011, 9:57am UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/4 "2011-09-07T09:57:52Z")
> [@PlasticWhip](#): > > 1. Easily, Dry them after cleaning them. i haven’t cleaned them yet so idk ---
**Author:** ![PlasticWhip](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/plasticwhip/32/896_2.png) [@PlasticWhip](https://forums.yoyoexpert.com/u/PlasticWhip)\ **Post date:** [September 7, 2011, 11:49am UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/5 "2011-09-07T11:49:38Z")
Where you live might have an effect on it. If it’s humid then your bearing will rust. Try spraying it with WD-40 and leaving it overnight, then put it on a golf tee and chuck the golf tee to a drill. Hold the bearing while spinning the drill. Do this for five minutes. Clean the bearing twice in a solvent to get it working right. Lightly lube the bearing (I don’t but I don’t live in a very humid place. You probably should). ---
**Author:** ![nobody](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nobody/32/845_2.png) [@nobody](https://forums.yoyoexpert.com/u/nobody)\ **Post date:** [September 10, 2011, 9:30pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/6 "2011-09-10T21:30:20Z")
1. Beef cakeing helps center the string for more unresponsive play, without bunching up the string in the middle. 2. It makes the gap slightly wider and makes it better for 5a (somehow). You do it by sanding the walls and by making the bearing seat lower by sanding it. 3. You can keep them in a jar or air tight box over night, or you can remove the string from the yoyo, when you’re not using it. You should also make sure that the bearing never gets wet. 4. Yes, but it is really hard, and cost alot for a modder to do it, and will make the yoyo wobble alot. 5. Yes, but again it is not worth the money or effort. ---
**Author:** ![nobody](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nobody/32/845_2.png) [@nobody](https://forums.yoyoexpert.com/u/nobody)\ **Post date:** [September 11, 2011, 2:01pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/7 "2011-09-11T14:01:02Z")
> [@PlasticWhip](#): > > Where you live might have an effect on it. If it’s humid then your bearing will rust. Try spraying it with WD-40 and leaving it overnight, then put it on a golf tee and chuck the golf tee to a drill. Hold the bearing while spinning the drill. Do this for five minutes. Clean the bearing twice in a solvent to get it working right. Lightly lube the bearing (I don’t but I don’t live in a very humid place. You probably should). Sorry for double post, but, wd-40 isn’t the best thing for your bearing. Using a drill to break in your bearing is bad because if there is any small pieces of dirt in the bearing, they can dig into the side or wall of the bearing, thus messing it up. ---
**Author:** ![PlasticWhip](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/plasticwhip/32/896_2.png) [@PlasticWhip](https://forums.yoyoexpert.com/u/PlasticWhip)\ **Post date:** [September 14, 2011, 8:27pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/8 "2011-09-14T20:27:41Z")
> [@nobody](#): > > wd-40 isn’t the best thing for your bearing. > Using a drill to break in your bearing is bad because if there is any small pieces of dirt in the bearing, they can dig into the side or wall of the bearing, thus messing it up. 1. How else do you get the rust out? 2. It worked for me. ---
**Author:** ![yoyospirit](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyospirit/32/219875_2.png) [@yoyospirit](https://forums.yoyoexpert.com/u/yoyospirit)\ **Post date:** [September 14, 2011, 10:47pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/9 "2011-09-14T22:47:02Z")
> [@nobody](#): > > > [@PlasticWhip](#): > > > > Where you live might have an effect on it. If it’s humid then your bearing will rust. Try spraying it with WD-40 and leaving it overnight, then put it on a golf tee and chuck the golf tee to a drill. Hold the bearing while spinning the drill. Do this for five minutes. Clean the bearing twice in a solvent to get it working right. Lightly lube the bearing (I don’t but I don’t live in a very humid place. You probably should). > > Sorry for double post, but, wd-40 isn’t the best thing for your bearing. > Using a drill to break in your bearing is bad because if there is any small pieces of dirt in the bearing, they can dig into the side or wall of the bearing, thus messing it up. I’m not trying to be mean or anything, but if you’re not sure of something, please, just don’t make the post; you’re confusing him. WD40 will indeed gunk up the bearing, but can easily be cleaned out. WD40 should only be used on bearings if the bearing is rusted and cleaned afterwards. And using a drill to break in a bearing is fine, just a lot more hassle. Any dirt can be cleaned out. ---
**Author:** ![PlasticWhip](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/plasticwhip/32/896_2.png) [@PlasticWhip](https://forums.yoyoexpert.com/u/PlasticWhip)\ **Post date:** [September 15, 2011, 8:34pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/10 "2011-09-15T20:34:56Z")
Hey you changed the q’s!?!? ---
**Author:** ![hotrodyoyoer](https://avatars.discourse-cdn.com/v4/letter/h/b5a626/32.png) [@hotrodyoyoer](https://forums.yoyoexpert.com/u/hotrodyoyoer)\ **Post date:** [September 15, 2011, 9:59pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/11 "2011-09-15T21:59:31Z")
> [@PlasticWhip](#): > > Hey you changed the q’s!?!? yea i don’t know y i didn’t just add to it ---
**Author:** ![yoyospirit](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyospirit/32/219875_2.png) [@yoyospirit](https://forums.yoyoexpert.com/u/yoyospirit)\ **Post date:** [September 15, 2011, 10:05pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/12 "2011-09-15T22:05:01Z")
Putting hubstacks on a Drifter is actually quit hard. You first have to shave down part of the nipple, only then you can use the pgm hubstack kit. ---
**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\ **Post date:** [September 16, 2011, 1:30am UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/13 "2011-09-16T01:30:46Z")
> [@yoyospirit](#): > > > [@nobody](#): > > > > > [@PlasticWhip](#): > > > > > > Where you live might have an effect on it. If it’s humid then your bearing will rust. Try spraying it with WD-40 and leaving it overnight, then put it on a golf tee and chuck the golf tee to a drill. Hold the bearing while spinning the drill. Do this for five minutes. Clean the bearing twice in a solvent to get it working right. Lightly lube the bearing (I don’t but I don’t live in a very humid place. You probably should). > > > > Sorry for double post, but, wd-40 isn’t the best thing for your bearing. > > Using a drill to break in your bearing is bad because if there is any small pieces of dirt in the bearing, they can dig into the side or wall of the bearing, thus messing it up. > > I’m not trying to be mean or anything, but if you’re not sure of something, please, just don’t make the post; you’re confusing him. WD40 will indeed gunk up the bearing, but can easily be cleaned out. WD40 should only be used on bearings if the bearing is rusted and cleaned afterwards. And using a drill to break in a bearing is fine, just a lot more hassle. Any dirt can be cleaned out. I’m not trying to be mean or anything, but if you’re not sure of something, please, just don’t make the post; you’re confusing him. WD-40 will not gunk up the bearing. I’ve been using wd-40 in one certain bearing for years. Doing it just to prove others wrong. I’ve had no problems with it and this particular fhz has 4 minute spins with my massive arms throwing it. I will say it’s not the best because it attracts dust. That’s why this bearing still has the shields on. ---
**Author:** ![nobody](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nobody/32/845_2.png) [@nobody](https://forums.yoyoexpert.com/u/nobody)\ **Post date:** [September 16, 2011, 2:13am UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/14 "2011-09-16T02:13:37Z")
Sorry, should I remove the post? Wait I said “not the best”, not “bad”. 😛 ---
**Author:** ![yoyospirit](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyospirit/32/219875_2.png) [@yoyospirit](https://forums.yoyoexpert.com/u/yoyospirit)\ **Post date:** [September 16, 2011, 10:48pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/15 "2011-09-16T22:48:03Z")
> [@Icthus](#): > > > [@yoyospirit](#): > > > > > [@nobody](#): > > > > > > > [@PlasticWhip](#): > > > > > > > > Where you live might have an effect on it. If it’s humid then your bearing will rust. Try spraying it with WD-40 and leaving it overnight, then put it on a golf tee and chuck the golf tee to a drill. Hold the bearing while spinning the drill. Do this for five minutes. Clean the bearing twice in a solvent to get it working right. Lightly lube the bearing (I don’t but I don’t live in a very humid place. You probably should). > > > > > > Sorry for double post, but, wd-40 isn’t the best thing for your bearing. > > > Using a drill to break in your bearing is bad because if there is any small pieces of dirt in the bearing, they can dig into the side or wall of the bearing, thus messing it up. > > > > I’m not trying to be mean or anything, but if you’re not sure of something, please, just don’t make the post; you’re confusing him. WD40 will indeed gunk up the bearing, but can easily be cleaned out. WD40 should only be used on bearings if the bearing is rusted and cleaned afterwards. And using a drill to break in a bearing is fine, just a lot more hassle. Any dirt can be cleaned out. > > I’m not trying to be mean or anything, but if you’re not sure of something, please, just don’t make the post; you’re confusing him. WD-40 will not gunk up the bearing. I’ve been using wd-40 in one certain bearing for years. Doing it just to prove others wrong. I’ve had no problems with it and this particular fhz has 4 minute spins with my massive arms throwing it. I will say it’s not the best because it attracts dust. That’s why this bearing still has the shields on. Well you learn something new everyday. But doesn’t the dirt and dust gunk up the bearing at somepoint? ---
**Author:** ![PlasticWhip](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/plasticwhip/32/896_2.png) [@PlasticWhip](https://forums.yoyoexpert.com/u/PlasticWhip)\ **Post date:** [September 17, 2011, 12:42pm UTC](https://forums.yoyoexpert.com/t/some-modding-questions/29737/16 "2011-09-17T12:42:59Z")
> [@yoyospirit](#): > > > [@Icthus](#): > > > > > [@yoyospirit](#): > > > > > > > [@nobody](#): > > > > > > > > > [@PlasticWhip](#): > > > > > > > > > > Where you live might have an effect on it. If it’s humid then your bearing will rust. Try spraying it with WD-40 and leaving it overnight, then put it on a golf tee and chuck the golf tee to a drill. Hold the bearing while spinning the drill. Do this for five minutes. Clean the bearing twice in a solvent to get it working right. Lightly lube the bearing (I don’t but I don’t live in a very humid place. You probably should). > > > > > > > > Sorry for double post, but, wd-40 isn’t the best thing for your bearing. > > > > Using a drill to break in your bearing is bad because if there is any small pieces of dirt in the bearing, they can dig into the side or wall of the bearing, thus messing it up. > > > > > > I’m not trying to be mean or anything, but if you’re not sure of something, please, just don’t make the post; you’re confusing him. WD40 will indeed gunk up the bearing, but can easily be cleaned out. WD40 should only be used on bearings if the bearing is rusted and cleaned afterwards. And using a drill to break in a bearing is fine, just a lot more hassle. Any dirt can be cleaned out. > > > > I’m not trying to be mean or anything, but if you’re not sure of something, please, just don’t make the post; you’re confusing him. WD-40 will not gunk up the bearing. I’ve been using wd-40 in one certain bearing for years. Doing it just to prove others wrong. I’ve had no problems with it and this particular fhz has 4 minute spins with my massive arms throwing it. I will say it’s not the best because it attracts dust. That’s why this bearing still has the shields on. > > Well you learn something new everyday. But doesn’t the dirt and dust gunk up the bearing at somepoint? Yes that is why you blow out the stuff with compresses air periodically.