# So I want to 3D print a YOYO

**URL:** <https://forums.yoyoexpert.com/t/so-i-want-to-3d-print-a-yoyo/74738>\
**Category:** General Yo-Yo\
**Created:** [May 20, 2015, 3:04am UTC](https://forums.yoyoexpert.com/t/so-i-want-to-3d-print-a-yoyo/74738 "2015-05-20T03:04:31Z")\
**Posts on this page:** 5\
**Page:** 4

<div class="post-metadata">

**Author:** ![Revolution626](https://avatars.discourse-cdn.com/v4/letter/r/e0b2c6/32.png) [@Revolution626](https://forums.yoyoexpert.com/u/Revolution626)\
**Post date:** [June 9, 2015, 7:19pm UTC](https://forums.yoyoexpert.com/t/so-i-want-to-3d-print-a-yoyo/74738/61 "2015-06-09T19:19:39Z")

</div>

Sorry.

I will change the model and or add supports. But what settings can I change?

What should I make the layer height, shell thickness and Infill?

---

<div class="post-metadata">

**Author:** ![kyo](https://avatars.discourse-cdn.com/v4/letter/k/df705f/32.png) [@kyo](https://forums.yoyoexpert.com/u/kyo)\
**Post date:** [June 9, 2015, 7:29pm UTC](https://forums.yoyoexpert.com/t/so-i-want-to-3d-print-a-yoyo/74738/62 "2015-06-09T19:29:11Z")

</div>

> [@Revolution626](#):
>
> Now if only the other side looked as good.
> 
> What could be causing this?
> 
> I think I know… I think I left the central pinion… or shaft slightly off the ground. It’s not a problem for a printer that can print supports, but Makerbot doesn’t have support matter. It uses the same white stuff for all prints
> 
> What can I do? Help?!?

Spend an hour and actually learn how to use that printer, seriously. It prints supports just fine…

Kyle

---

<div class="post-metadata">

**Author:** ![Revolution626](https://avatars.discourse-cdn.com/v4/letter/r/e0b2c6/32.png) [@Revolution626](https://forums.yoyoexpert.com/u/Revolution626)\
**Post date:** [June 9, 2015, 8:27pm UTC](https://forums.yoyoexpert.com/t/so-i-want-to-3d-print-a-yoyo/74738/63 "2015-06-09T20:27:01Z")

</div>

Yeah… I didn’t understand it at the time. Now I do. It was a last minute thing, so I only had 5 minutes to learn.

Can someone point me in the direction of a online manual for this, or troubleshooting? I am Googling stuff as we speak, but if you have first hand experience, or know of a great resource, let me know.

---

<div class="post-metadata">

**Author:** ![kyo](https://avatars.discourse-cdn.com/v4/letter/k/df705f/32.png) [@kyo](https://forums.yoyoexpert.com/u/kyo)\
**Post date:** [June 10, 2015, 4:01am UTC](https://forums.yoyoexpert.com/t/so-i-want-to-3d-print-a-yoyo/74738/64 "2015-06-10T04:01:08Z")

</div>

there are a number of google groups on various printers and 3d printing in general.

---

<div class="post-metadata">

**Author:** ![CyBer\_Hurricane](https://avatars.discourse-cdn.com/v4/letter/c/f08c70/32.png) [@CyBer\_Hurricane](https://forums.yoyoexpert.com/u/CyBer_Hurricane)\
**Post date:** [June 10, 2015, 9:39pm UTC](https://forums.yoyoexpert.com/t/so-i-want-to-3d-print-a-yoyo/74738/65 "2015-06-10T21:39:01Z")

</div>

When i print yoyos I have found that many settings work but concentric infill and whatever layer height you want to do works just fine.

[Previous page](https://forums.yoyoexpert.com/t/so-i-want-to-3d-print-a-yoyo/74738.md?page=3)
