# Should a response pad stick out?

**URL:** <https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758>\
**Category:** General Yo-Yo\
**Created:** [January 22, 2021, 10:43am UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758 "2021-01-22T10:43:17Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Glar3z](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@Glar3z](https://forums.yoyoexpert.com/u/Glar3z)\
**Post date:** [January 22, 2021, 10:43am UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/1 "2021-01-22T10:43:17Z")

</div>

I just started yoyoing and, I don’t know if the response pads should stick out a little in a responsive yoyo or should it flush? If I it’s flush I have a hard time tugging it back, is it normal??

Please tell me, thanks!

---

<div class="post-metadata">

**Author:** ![TheThrowingGnome](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/thethrowinggnome/32/14231_2.png) [@TheThrowingGnome](https://forums.yoyoexpert.com/u/TheThrowingGnome)\
**Post date:** [January 22, 2021, 11:50am UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/2 "2021-01-22T11:50:39Z")

</div>

For responsive I prefer flush pads and add thick lube to the bearing to dial in the desired response.

---

<div class="post-metadata">

**Author:** ![HappyHands](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/happyhands/32/93016_2.png) [@HappyHands](https://forums.yoyoexpert.com/u/HappyHands)\
**Post date:** [January 22, 2021, 12:16pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/3 "2021-01-22T12:16:59Z")

</div>

Hiya, welcome along.  
I had a yo-yo factory Replay responsive version and the pads do stick out on it. I found as I progressed I found the right speed where it would slip out of a bind or not return with tugs.  
Speed was key and a nice yoyo foundation and made me develop my throw cleaner and faster.

I upgraded to a replay pro and other mono metals and they all have flush pads.

If you are only doing responsive yo-yo I don’t know if your aware of the double wrap method to string up a yo-yo around the bearing, look it up if your not.

You can try lubing it up with some thick lube, if you don’t have that try different string or just a new string if you have it.  
Good luck!

---

<div class="post-metadata">

**Author:** ![ChrisFrancz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/chrisfrancz/32/48992_2.png) [@ChrisFrancz](https://forums.yoyoexpert.com/u/ChrisFrancz)\
**Post date:** [January 22, 2021, 12:55pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/4 "2021-01-22T12:55:13Z")

</div>

What yoyo do you have? Oh, welcome to the Forums! A lot or all responsive yoyos that come with pads have pads that stick out. This can make it a little difficult to get sleep time as you are perfecting your throw and getting it straight. This frustrated me and I learned I could switch the thicker pads with thinner pads (of the same diameter). Tell us what you are throwing or post some pics so we can help you out more with advice or suggestions. Don’t get discouraged!

---

<div class="post-metadata">

**Author:** ![Glar3z](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@Glar3z](https://forums.yoyoexpert.com/u/Glar3z)\
**Post date:** [January 22, 2021, 1:22pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/5 "2021-01-22T13:22:17Z")

</div>

Thanks so much for the nice welcome!  
So your pads are flush? Alright then, I see, thanks!!

---

<div class="post-metadata">

**Author:** ![Glar3z](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@Glar3z](https://forums.yoyoexpert.com/u/Glar3z)\
**Post date:** [January 22, 2021, 1:23pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/6 "2021-01-22T13:23:10Z")

</div>

Thanks for the welcome!!  
And thanks for your suggestions, I appreciate it!

---

<div class="post-metadata">

**Author:** ![Glar3z](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@Glar3z](https://forums.yoyoexpert.com/u/Glar3z)\
**Post date:** [January 22, 2021, 1:24pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/7 "2021-01-22T13:24:01Z")

</div>

Thanks for your suggestion!

---

<div class="post-metadata">

**Author:** ![ChrisFrancz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/chrisfrancz/32/48992_2.png) [@ChrisFrancz](https://forums.yoyoexpert.com/u/ChrisFrancz)\
**Post date:** [January 22, 2021, 2:00pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/8 "2021-01-22T14:00:14Z")

</div>

Please let us know the yoyo you are talking about so we can better help. Not all response pads are the same diameter so be careful when ordering.

---

<div class="post-metadata">

**Author:** ![fatguysnacks247](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/fatguysnacks247/32/81478_2.png) [@fatguysnacks247](https://forums.yoyoexpert.com/u/fatguysnacks247)\
**Post date:** [January 22, 2021, 2:11pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/9 "2021-01-22T14:11:48Z")

</div>

i /my kiddo has a dv888 and the pads stick out fairly significantly into the gap. some are not so obtrusive

---

<div class="post-metadata">

**Author:** ![French](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/french/32/70748_2.png) [@French](https://forums.yoyoexpert.com/u/French)\
**Post date:** [January 22, 2021, 2:57pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/10 "2021-01-22T14:57:28Z")

</div>

Welcome. Be sure to read up and ask any questions…as the saying goes “if you have the question, someone else probably has it as well”

My experience is on unresponsive yoyos, the ones you need to do a bind to get it back to your hand, the pads are normally flush, maybe slightly recessed. On responsive Yoyos, the pads are either flush or sticking into the gap a bit. My YoYoFactory One has pads that stick into the gap. This gives a snappy response, but, also can lead to frustration if your throw is tilted.

If you would like me to clarify anything, don’t hesitate to ask. Have fun learning, and remember, everyone progresses at their own pace

---

<div class="post-metadata">

**Author:** ![Glar3z](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@Glar3z](https://forums.yoyoexpert.com/u/Glar3z)\
**Post date:** [January 22, 2021, 3:42pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/11 "2021-01-22T15:42:12Z")

</div>

Thanks!  
But if it’s flush I have a harder time tugging it back up, any tips?

---

<div class="post-metadata">

**Author:** ![ChrisFrancz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/chrisfrancz/32/48992_2.png) [@ChrisFrancz](https://forums.yoyoexpert.com/u/ChrisFrancz)\
**Post date:** [January 22, 2021, 4:26pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/12 "2021-01-22T16:26:12Z")

</div>

It sounds like your yoyo was described as unresponsive when you purchased but you did not understand what that meant. It means it will not return with a tug. You have to learn a bind.

[![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/4/4/7/447db4474af39657a475591e011995e81af039bb.jpeg "Simple bind returns") ](https://www.youtube.com/watch?v=5kePWodqEZk)

---

<div class="post-metadata">

**Author:** ![Glar3z](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@Glar3z](https://forums.yoyoexpert.com/u/Glar3z)\
**Post date:** [January 22, 2021, 4:27pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/13 "2021-01-22T16:27:44Z")

</div>

No, it was described as responsive

---

<div class="post-metadata">

**Author:** ![ChrisFrancz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/chrisfrancz/32/48992_2.png) [@ChrisFrancz](https://forums.yoyoexpert.com/u/ChrisFrancz)\
**Post date:** [January 22, 2021, 4:28pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/14 "2021-01-22T16:28:27Z")

</div>

There ya go! Check out Doc’s video I added!

---

<div class="post-metadata">

**Author:** ![Glar3z](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@Glar3z](https://forums.yoyoexpert.com/u/Glar3z)\
**Post date:** [January 22, 2021, 4:28pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/15 "2021-01-22T16:28:29Z")

</div>

And can I put one flush and one sticking out??

---

<div class="post-metadata">

**Author:** ![Glar3z](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@Glar3z](https://forums.yoyoexpert.com/u/Glar3z)\
**Post date:** [January 22, 2021, 4:29pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/16 "2021-01-22T16:29:03Z")

</div>

Thanks!!

---

<div class="post-metadata">

**Author:** ![ChrisFrancz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/chrisfrancz/32/48992_2.png) [@ChrisFrancz](https://forums.yoyoexpert.com/u/ChrisFrancz)\
**Post date:** [January 22, 2021, 4:29pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/17 "2021-01-22T16:29:56Z")

</div>

Dude, I have no idea what you are dealing with since you are keeping it a secret what yoyo you are talking about. Post pics! Both pads should come flush from the manufacturer.

---

<div class="post-metadata">

**Author:** ![TheThrowingGnome](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/thethrowinggnome/32/14231_2.png) [@TheThrowingGnome](https://forums.yoyoexpert.com/u/TheThrowingGnome)\
**Post date:** [January 22, 2021, 4:31pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/18 "2021-01-22T16:31:58Z")

</div>

Have you tried thick lube yet? Vaseline works. Just press a liberal amount into the sides of the bearing and it’ll be a snappy response with flush pads.

Good luck and happy yoyo!

---

<div class="post-metadata">

**Author:** ![French](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/french/32/70748_2.png) [@French](https://forums.yoyoexpert.com/u/French)\
**Post date:** [January 22, 2021, 4:34pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/19 "2021-01-22T16:34:51Z")

</div>

You can open the yoyo and add some lube to the bearing. They sell “thick lube” which is for responsive yoyos, but, 3-in-1 oil, sewing machine oil, grease…all will slow the bearing’s spin a little and make the yoyo more responsive. Even the “thin lube” they sell for unresponsive yoyos will make the yoyo responsive if you use too much (like a single full drop).

Here is a video on how to lube the bearing

> **[YoYoExpert.com - Maintenance - Yo-Yo Lube](https://yoyoexpert.com/learn/410-maintenance-lube.php)**
>
> Watch free yo-yo trick videos, learn from professional yo-yo players, and buy yo-yos from the YoYo Expert!

There is a whole maintenance section under “learn” on the YoyoExpert site. André and his team do a way better job of showing than I do of telling 🙂

---

<div class="post-metadata">

**Author:** ![Glar3z](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@Glar3z](https://forums.yoyoexpert.com/u/Glar3z)\
**Post date:** [January 22, 2021, 4:50pm UTC](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758/20 "2021-01-22T16:50:00Z")

</div>

Which vaseline?

[Next page](https://forums.yoyoexpert.com/t/should-a-response-pad-stick-out/332758.md?page=2)
