# scilicone question

**URL:** <https://forums.yoyoexpert.com/t/scilicone-question/10968>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [February 2, 2010, 8:39pm UTC](https://forums.yoyoexpert.com/t/scilicone-question/10968 "2010-02-02T20:39:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![TMsoccer](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/tmsoccer/32/334_2.png) [@TMsoccer](https://forums.yoyoexpert.com/u/TMsoccer)\
**Post date:** [February 2, 2010, 8:39pm UTC](https://forums.yoyoexpert.com/t/scilicone-question/10968/1 "2010-02-02T20:39:47Z")

</div>

Will flowable scilicone work well in a die-nasty?

---

<div class="post-metadata">

**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\
**Post date:** [February 2, 2010, 8:59pm UTC](https://forums.yoyoexpert.com/t/scilicone-question/10968/2 "2010-02-02T20:59:01Z")

</div>

From my experience flowable tears out easier than gasket maker. Seeing how the recess on the Die Nasty is borderline too shallow I would recommend gasket maker. Will gasket maker work well in a Die Nasty? Absolutely, I siliconed a PGM with gasket maker and it played great.

---

<div class="post-metadata">

**Author:** ![Apetrunk](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apetrunk/32/148_2.png) [@Apetrunk](https://forums.yoyoexpert.com/u/Apetrunk)\
**Post date:** [February 2, 2010, 10:00pm UTC](https://forums.yoyoexpert.com/t/scilicone-question/10968/3 "2010-02-02T22:00:22Z")

</div>

You should try it though. Some people said the k-pad recess (like on a C13) was too shallow for flowable, but it worked great and is still there. Might as well try it and if it doesn’t work then oh well.

---

<div class="post-metadata">

**Author:** ![benyo](https://avatars.discourse-cdn.com/v4/letter/b/7bcc69/32.png) [@benyo](https://forums.yoyoexpert.com/u/benyo)\
**Post date:** [February 3, 2010, 12:04am UTC](https://forums.yoyoexpert.com/t/scilicone-question/10968/4 "2010-02-03T00:04:48Z")

</div>

> [@Yummy](#):
>
> From my experience flowable tears out easier than gasket maker. Seeing how the recess on the Die Nasty is borderline too shallow I would recommend gasket maker. Will gasket maker work well in a Die Nasty? Absolutely, I siliconed a PGM with gasket maker and it played great.

absolutly. it also is real hard to put in real shallow gaps.