# Responsiveness issue YoYoFactory Velocity

**URL:** <https://forums.yoyoexpert.com/t/responsiveness-issue-yoyofactory-velocity/80063>\
**Category:** General Yo-Yo\
**Created:** [April 14, 2016, 12:25am UTC](https://forums.yoyoexpert.com/t/responsiveness-issue-yoyofactory-velocity/80063 "2016-04-14T00:25:00Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![JoYo](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@JoYo](https://forums.yoyoexpert.com/u/JoYo)\
**Post date:** [April 14, 2016, 12:25am UTC](https://forums.yoyoexpert.com/t/responsiveness-issue-yoyofactory-velocity/80063/1 "2016-04-14T00:25:00Z")

</div>

I just bought the YoYoFactory Velocity, and I’m having a small issue with it. I can’t seem to make it fully unresponsive. Any tricks to prevent the string from catching? I used thin lube already, but only on one half of the bearing (because the bearing removal tool hasn’t come yet). Thanks!

---

<div class="post-metadata">

**Author:** ![bekind-rewind](https://avatars.discourse-cdn.com/v4/letter/b/53a042/32.png) [@bekind-rewind](https://forums.yoyoexpert.com/u/bekind-rewind)\
**Post date:** [April 14, 2016, 1:55am UTC](https://forums.yoyoexpert.com/t/responsiveness-issue-yoyofactory-velocity/80063/2 "2016-04-14T01:55:28Z")

</div>

Unfortunately, even at its widest width, the gap and response pads really don’t allow for it to be fully unresponsive. It should be unresponsive when just hanging down. But even in a trapeze there is usually too much string for it to remain unresponsive. You can try getting really thin string as the cheapest solution. I’d say if you’re done with responsive yo-yo’s and just want an unresponsive experience. Upgrade to a Replay Pro, or any of the other wonderful entry level unresponsive throws. For the same price as your velocity, you won’t encounter any of the same issues. Also, on something like the velocity, a pair of pliers can usually do the trick for bearing removal. Standard yoyo factory tool won’t do the trick on that size bearing. Best of luck!

---

<div class="post-metadata">

**Author:** ![bigbs\_domain](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bigbs_domain/32/193839_2.png) [@bigbs\_domain](https://forums.yoyoexpert.com/u/bigbs_domain)\
**Post date:** [April 14, 2016, 2:08am UTC](https://forums.yoyoexpert.com/t/responsiveness-issue-yoyofactory-velocity/80063/3 "2016-04-14T02:08:38Z")

</div>

Clean the bearing with acetone don’t lube it and find thinner string worked for mine and a friends

---

<div class="post-metadata">

**Author:** ![JoYo](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@JoYo](https://forums.yoyoexpert.com/u/JoYo)\
**Post date:** [April 14, 2016, 2:12am UTC](https://forums.yoyoexpert.com/t/responsiveness-issue-yoyofactory-velocity/80063/4 "2016-04-14T02:12:44Z")

</div>

> [@bekind-rewind](#):
>
> Unfortunately, even at its widest width, the gap and response pads really don’t allow for it to be fully unresponsive. It should be unresponsive when just hanging down. But even in a trapeze there is usually too much string for it to remain unresponsive. You can try getting really thin string as the cheapest solution. I’d say if you’re done with responsive yo-yo’s and just want an unresponsive experience. Upgrade to a Replay Pro, or any of the other wonderful entry level unresponsive throws. For the same price as your velocity, you won’t encounter any of the same issues. Also, on something like the velocity, a pair of pliers can usually do the trick for bearing removal. Standard yoyo factory tool won’t do the trick on that size bearing. Best of luck!

Well, I have a Horizon Yoyo, but I was looking for a good plastic YoYo that is semi-responsive so I can do string tricks and responsive tricks.

---

<div class="post-metadata">

**Author:** ![bekind-rewind](https://avatars.discourse-cdn.com/v4/letter/b/53a042/32.png) [@bekind-rewind](https://forums.yoyoexpert.com/u/bekind-rewind)\
**Post date:** [April 14, 2016, 2:19am UTC](https://forums.yoyoexpert.com/t/responsiveness-issue-yoyofactory-velocity/80063/5 "2016-04-14T02:19:45Z")

</div>

In that case, thin string and possibly upgrade the bearing/ fool around with response pads.

---

<div class="post-metadata">

**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\
**Post date:** [April 14, 2016, 2:30am UTC](https://forums.yoyoexpert.com/t/responsiveness-issue-yoyofactory-velocity/80063/6 "2016-04-14T02:30:44Z")

</div>

> [@JoYo](#):
>
> I used thin lube already, but only on one half of the bearing (because the bearing removal tool hasn’t come yet).

Ummm, if you put lube in one side, it effectively lubes the whole bearing. There is nothing separating one side from the other.

p.s. Lube does not make a yoyo spin longer, just the opposite is true.
