# Replay pro problems

**URL:** <https://forums.yoyoexpert.com/t/replay-pro-problems/79987>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [April 7, 2016, 9:58am UTC](https://forums.yoyoexpert.com/t/replay-pro-problems/79987 "2016-04-07T09:58:35Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Upmanyu](https://avatars.discourse-cdn.com/v4/letter/u/e68b1a/32.png) [@Upmanyu](https://forums.yoyoexpert.com/u/Upmanyu)\
**Post date:** [April 7, 2016, 9:58am UTC](https://forums.yoyoexpert.com/t/replay-pro-problems/79987/1 "2016-04-07T09:58:35Z")

</div>

I got a Replay Pro recently… One of it’s caps is kinda loose and makes rattling noises mid spin… How can i rectify this?  
The cap isnt really moving in the vertical direction much but it rotates in place …  
It is the non-bolt side cap  
Any help would be greatly appreciated  
Also…i can spot large air bubbles in the 2 sides…is this normal?

---

<div class="post-metadata">

**Author:** ![YoYoExpertGarrett](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoexpertgarrett/32/1543_2.png) [@YoYoExpertGarrett](https://forums.yoyoexpert.com/u/YoYoExpertGarrett)\
**Post date:** [April 7, 2016, 1:19pm UTC](https://forums.yoyoexpert.com/t/replay-pro-problems/79987/2 "2016-04-07T13:19:21Z")

</div>

Rattling caps can easily be fixed by crimping the edges of the caps just a tiny bit. I use pliers to just pinch the very edge of the cap which usually fixes the issue. Don’t go all around the cap, crimp one or two small spots at a time, if the cap still rattles then do one more and try again.

The caps are pretty easy to remove and work on - There are holes in the plastic under the response pads that you can stick a toothpick or allen wrench in to pop the caps out.

Not sure about the air bubbles you mentioned, a picture might help.

---

<div class="post-metadata">

**Author:** ![Upmanyu](https://avatars.discourse-cdn.com/v4/letter/u/e68b1a/32.png) [@Upmanyu](https://forums.yoyoexpert.com/u/Upmanyu)\
**Post date:** [April 7, 2016, 8:04pm UTC](https://forums.yoyoexpert.com/t/replay-pro-problems/79987/3 "2016-04-07T20:04:36Z")

</div>

So i remove the cap, crimp the edge and then stick it back in?

---

<div class="post-metadata">

**Author:** ![YoYoExpertGarrett](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoexpertgarrett/32/1543_2.png) [@YoYoExpertGarrett](https://forums.yoyoexpert.com/u/YoYoExpertGarrett)\
**Post date:** [April 7, 2016, 8:19pm UTC](https://forums.yoyoexpert.com/t/replay-pro-problems/79987/4 "2016-04-07T20:19:17Z")

</div>

That’s correct.
