# Recognition trouble?

**URL:** <https://forums.yoyoexpert.com/t/recognition-trouble/349064>\
**Category:** General Yo-Yo\
**Created:** [December 14, 2021, 10:55pm UTC](https://forums.yoyoexpert.com/t/recognition-trouble/349064 "2021-12-14T22:55:16Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Yoyogeek15](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyogeek15/32/187634_2.png) [@Yoyogeek15](https://forums.yoyoexpert.com/u/Yoyogeek15)\
**Post date:** [December 14, 2021, 10:55pm UTC](https://forums.yoyoexpert.com/t/recognition-trouble/349064/1 "2021-12-14T22:55:16Z")

</div>

I heard that the recognition can take off anodizing by doing thumb grinds is that true ??

---

<div class="post-metadata">

**Author:** ![Proboscis](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/proboscis/32/135627_2.png) [@Proboscis](https://forums.yoyoexpert.com/u/Proboscis)\
**Post date:** [December 15, 2021, 1:33am UTC](https://forums.yoyoexpert.com/t/recognition-trouble/349064/2 "2021-12-15T01:33:57Z")

</div>

I had a recog for quite some time and didn’t have no wearing down, but then again I rarely did thumb grinds. I would hesitate away from getting one because ano fades. The recognition is a very good yoyo and the price is quite affordable. Plus ano fading doesn’t affect performance so it isn’t much of a loss other than cosmetic.

---

<div class="post-metadata">

**Author:** ![ChrisFrancz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/chrisfrancz/32/48992_2.png) [@ChrisFrancz](https://forums.yoyoexpert.com/u/ChrisFrancz)\
**Post date:** [December 15, 2021, 1:51am UTC](https://forums.yoyoexpert.com/t/recognition-trouble/349064/3 "2021-12-15T01:51:51Z")

</div>

The ano fades? Like from exposure to light or just from a lot of handling? Does it rub off where it’s touched most often?

---

<div class="post-metadata">

**Author:** ![Upmanyu](https://avatars.discourse-cdn.com/v4/letter/u/e68b1a/32.png) [@Upmanyu](https://forums.yoyoexpert.com/u/Upmanyu)\
**Post date:** [December 15, 2021, 4:44pm UTC](https://forums.yoyoexpert.com/t/recognition-trouble/349064/4 "2021-12-15T16:44:27Z")

</div>

Never happened to mine and I used mine for a while!

---

<div class="post-metadata">

**Author:** ![Zacy](https://avatars.discourse-cdn.com/v4/letter/z/a183cd/32.png) [@Zacy](https://forums.yoyoexpert.com/u/Zacy)\
**Post date:** [December 15, 2021, 6:38pm UTC](https://forums.yoyoexpert.com/t/recognition-trouble/349064/5 "2021-12-15T18:38:31Z")

</div>

Anyone from unprld can correct me if I’m wrong, but I believe the last run of recog and elevation both had issues with the anno rubbing off. I think it was an issue with the factory as top yo (who I believe machines stuff for unprld) had the same issue. I wouldn’t worry so much on the latest runs though, and even if you do have an issue, unprld is a great company and will do what they can to help out. Don’t let it hold you back for a great throw!

---

<div class="post-metadata">

**Author:** ![Demontedsaregone](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/demontedsaregone/32/147133_2.png) [@Demontedsaregone](https://forums.yoyoexpert.com/u/Demontedsaregone)\
**Post date:** [December 15, 2021, 8:52pm UTC](https://forums.yoyoexpert.com/t/recognition-trouble/349064/6 "2021-12-15T20:52:04Z")

</div>

Mine is clear anodized. Never had that problem.
