# recessing fhz **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [August 28, 2013, 6:02am UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521 "2013-08-28T06:02:40Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![yogeek](https://avatars.discourse-cdn.com/v4/letter/y/eada6e/32.png) [@yogeek](https://forums.yoyoexpert.com/u/yogeek)\ **Post date:** [August 28, 2013, 6:02am UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/1 "2013-08-28T06:02:40Z")
I know there is already a thread about this but I was confused on some of the parts so is there a video on how to do this? ---
**Author:** ![dynikus](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dynikus/32/812_2.png) [@dynikus](https://forums.yoyoexpert.com/u/dynikus)\ **Post date:** [August 28, 2013, 6:48am UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/2 "2013-08-28T06:48:20Z")
do you have any specific questions? It’s a pretty simple process. ---
**Author:** ![yogeek](https://avatars.discourse-cdn.com/v4/letter/y/eada6e/32.png) [@yogeek](https://forums.yoyoexpert.com/u/yogeek)\ **Post date:** [August 28, 2013, 5:12pm UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/3 "2013-08-28T17:12:01Z")
when you start to cut the yoyo is the drill already spinning or do you set up the tool against the plastic and then start cutting and turning it off every couple seconds to wipe off the chips on the tool ---
**Author:** ![dynikus](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dynikus/32/812_2.png) [@dynikus](https://forums.yoyoexpert.com/u/dynikus)\ **Post date:** [August 28, 2013, 8:29pm UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/4 "2013-08-28T20:29:32Z")
The drill should already be spinning. You shouldn’t really have to turn it off to wipe off chips. When I first did it, I didn’t really have any idea what I was doing, and just freehanded the cut. While it did make a useable recess, it looked pretty sloppy. I don’t remember what all the thread about it said, but you’ll want some kind of a tool rest (2x4, or just something sturdy enough so the tool won’t bounce around.), and you want to keep the drill stationary. You’re basically making a makeshift lathe. This is essentially what you want to be doing, just you’re not going to recess all the way to the center. (starting at about 1 minute, going to about 1:07 ish.) [![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/9/1/7/917e4f7e9bf02849d87787d4e9253ca8a8bba333.jpeg "Natural edge bowl, Magnolia") ](https://www.youtube.com/watch?v=0KkMQCbEul8&t=58s) You anchor your tool on your rest, then bring it into the piece. And you want to cut at around the equator line. If you want, I can probably make a video showing it. I don’t have a fhz to recess, but I could make a video of the basic set up and everything. ---
**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\ **Post date:** [August 29, 2013, 1:07am UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/5 "2013-08-29T01:07:09Z")
Also make sure you drag the cutter rather than point it into the rotation. --------------\> \ Rotation cutter direction orientation It’s a scraping operation. Have you looked at this: [How to get great recesses with a drill](http://yoyoexpert.com/forums/index.php/topic,15085.0.html) Or this: [![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/7/4/b/74b72cf40b35498009e7bdcd96c1b14879327ae7.jpeg "How to silicon recess a duncan yoyo") ](https://www.youtube.com/watch?v=o2koXkqDH24) Skip does it right. ---
**Author:** ![dynikus](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dynikus/32/812_2.png) [@dynikus](https://forums.yoyoexpert.com/u/dynikus)\ **Post date:** [August 29, 2013, 6:59am UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/6 "2013-08-29T06:59:26Z")
my only problem with how skip does it is the lack of a tool rest, as well as how he starts on the wrong side (which I guess doesn’t really matter if you’re not using a rest?), which would usually result in a sloppy looking recess, as well as added risk (there’s not a big risk in this case, but cutting down at an angle like that, and not using a rest increases the chance that the piece can rip the tool out of your hand and send it flying somewhere). His recess will work entirely adequately, but it’s not the best way to do it, and I wouldn’t really say he does it right. The thread you linked though is almost exactly what I was trying to describe in my last post. I wish I still had my fhz, I would post pics of what my less than perfect recess looked like. ---
**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\ **Post date:** [August 29, 2013, 1:45pm UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/7 "2013-08-29T13:45:04Z")
A tool rest is preferred, but you’re much less likely to have the tool grab if you drag it: --------------\> \ (yes) Rotation cutter direction orientation Holding it the opposite direction will surly grab it. --------------\> / (no) Rotation cutter direction orientation ---
**Author:** ![yogeek](https://avatars.discourse-cdn.com/v4/letter/y/eada6e/32.png) [@yogeek](https://forums.yoyoexpert.com/u/yogeek)\ **Post date:** [August 29, 2013, 6:16pm UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/8 "2013-08-29T18:16:07Z")
my only worry is that when I take the tool out to clean off the shavings when I come back in the tool is going to scrape the inner walls and make it all uneven ---
**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\ **Post date:** [August 29, 2013, 8:22pm UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/9 "2013-08-29T20:22:34Z")
I don’t think that’s been a concern for others. Just use some care going back in. ---
**Author:** ![Nemyo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nemyo/32/14407_2.png) [@Nemyo](https://forums.yoyoexpert.com/u/Nemyo)\ **Post date:** [August 30, 2013, 8:20pm UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/10 "2013-08-30T20:20:08Z")
> [@dynikus](#): > > I wish I still had my fhz, I would post pics of what my less than perfect recess looked like. Well, here is a pic of me less than perfect recess looks like: [Redirecting...](https://www.facebook.com/photo.php?fbid=500658243358917&set=p.500658243358917&type=1&theater) It does the job, but that dont mean it gotta look purty while doin it. Did it yesterday by mahself. Pretty proud. ---
**Author:** ![yogeek](https://avatars.discourse-cdn.com/v4/letter/y/eada6e/32.png) [@yogeek](https://forums.yoyoexpert.com/u/yogeek)\ **Post date:** [September 2, 2013, 6:09pm UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/11 "2013-09-02T18:09:59Z")
do you fill the recess up to the top with silicone or do you leave it a little bit from the top? ---
**Author:** ![dynikus](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dynikus/32/812_2.png) [@dynikus](https://forums.yoyoexpert.com/u/dynikus)\ **Post date:** [September 3, 2013, 2:44am UTC](https://forums.yoyoexpert.com/t/recessing-fhz/58521/12 "2013-09-03T02:44:03Z")
what I do is fill it over the top, then use a spoon to remove excess. [![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/4/9/b/49ba58143f2534387b7fd267cc399beb2f754350.jpeg "Yoyo siliconing tutorial") ](https://www.youtube.com/watch?v=K0jOHMees-g) like that