# putting stacks on 888

**URL:** <https://forums.yoyoexpert.com/t/putting-stacks-on-888/5920>\
**Category:** General Yo-Yo\
**Created:** [August 28, 2009, 12:34am UTC](https://forums.yoyoexpert.com/t/putting-stacks-on-888/5920 "2009-08-28T00:34:58Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fr3ak](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/fr3ak/32/276_2.png) [@Fr3ak](https://forums.yoyoexpert.com/u/Fr3ak)\
**Post date:** [August 28, 2009, 12:34am UTC](https://forums.yoyoexpert.com/t/putting-stacks-on-888/5920/1 "2009-08-28T00:34:58Z")

</div>

My stacks on my 888 came off and i’m having troubles getting them back on. Is there a trick to it?? I slide the bearing & stack on but getting that o-ring on is just not happening. Is there an easier way that someone knows about?? let me know. Please and thank you in advance!

---

<div class="post-metadata">

**Author:** ![polloyoyo12](https://avatars.discourse-cdn.com/v4/letter/p/dec6dc/32.png) [@polloyoyo12](https://forums.yoyoexpert.com/u/polloyoyo12)\
**Post date:** [August 28, 2009, 12:37am UTC](https://forums.yoyoexpert.com/t/putting-stacks-on-888/5920/2 "2009-08-28T00:37:59Z")

</div>

just press those suckers in ;D

---

<div class="post-metadata">

**Author:** ![druminpython](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/druminpython/32/57_2.png) [@druminpython](https://forums.yoyoexpert.com/u/druminpython)\
**Post date:** [August 28, 2009, 12:48am UTC](https://forums.yoyoexpert.com/t/putting-stacks-on-888/5920/3 "2009-08-28T00:48:23Z")

</div>

i had the same problem and this is how you do it  
remove stack from bearing put bearing on put o ring on put stack back on

---

<div class="post-metadata">

**Author:** ![Smoke770077](https://avatars.discourse-cdn.com/v4/letter/s/85f322/32.png) [@Smoke770077](https://forums.yoyoexpert.com/u/Smoke770077)\
**Post date:** [August 28, 2009, 1:31am UTC](https://forums.yoyoexpert.com/t/putting-stacks-on-888/5920/4 "2009-08-28T01:31:10Z")

</div>

First you but bearing A onto post B… The I found the easiest way to do the O-ring is to kinda set it on the post at an angle and use your thumb to push and stretch it over the post… Once its onuse your thumb nails to push it all the way onto the bearing… then just pop the stack over all of it

---

<div class="post-metadata">

**Author:** ![Apetrunk](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apetrunk/32/148_2.png) [@Apetrunk](https://forums.yoyoexpert.com/u/Apetrunk)\
**Post date:** [August 28, 2009, 1:51am UTC](https://forums.yoyoexpert.com/t/putting-stacks-on-888/5920/5 "2009-08-28T01:51:08Z")

</div>

Take a toothpick and cut it in half. Put the stack and bearing on. Push one side of the o-ring down with half of the toothpick. Push the other side of the o-ring down with the other half of the toothpick. Using that same one go around to get the rest of the o-ring down.

---

<div class="post-metadata">

**Author:** ![Fr3ak](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/fr3ak/32/276_2.png) [@Fr3ak](https://forums.yoyoexpert.com/u/Fr3ak)\
**Post date:** [August 28, 2009, 3:52am UTC](https://forums.yoyoexpert.com/t/putting-stacks-on-888/5920/6 "2009-08-28T03:52:20Z")

</div>

> [@druminpython](#):
>
> i had the same problem and this is how you do it  
> remove stack from bearing put bearing on put o ring on put stack back on

thanks druminpython, that worked perfectly.

---

<div class="post-metadata">

**Author:** ![druminpython](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/druminpython/32/57_2.png) [@druminpython](https://forums.yoyoexpert.com/u/druminpython)\
**Post date:** [August 28, 2009, 2:36pm UTC](https://forums.yoyoexpert.com/t/putting-stacks-on-888/5920/7 "2009-08-28T14:36:22Z")

</div>

Sure