# Proper 0A setup for YYF Confusion
**URL:** https://forums.yoyoexpert.com/t/proper-0a-setup-for-yyf-confusion/305371
**Category:** Yo-Yo Mods and Maintenance
**Created:** [July 12, 2019, 9:37am UTC](https://forums.yoyoexpert.com/t/proper-0a-setup-for-yyf-confusion/305371 "2019-07-12T09:37:04Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@paxl13](https://forums.yoyoexpert.com/u/paxl13)
#### Post date: [July 12, 2019, 9:37am UTC](https://forums.yoyoexpert.com/t/proper-0a-setup-for-yyf-confusion/305371/1 "2019-07-12T09:37:04Z")
Hey y’alls,
I was wondering what where you guys using to make the Confusion enough responsive to have some 0A fun… I personally found a setup this weeks that works good enough for it to be back in my rotation. So here is what I did.
1. Swapped the bearing which was getting too unresponsive for a ‘cheap’ one I found on amazon that had been greaced to survive a couple of zombie appocalipse
2. Use cotton type 10…
With this, the yoyo will respond quite easily, which is amazing 🙂
I do prefer wood but the confusion is fun b/c I don’t need to care about string tension 🙂
Cheers
paxl
---
### Author:  [@AaronW](https://forums.yoyoexpert.com/u/AaronW)
#### Post date: [July 12, 2019, 1:48pm UTC](https://forums.yoyoexpert.com/t/proper-0a-setup-for-yyf-confusion/305371/2 "2019-07-12T13:48:49Z")
I put in the flush fitting pads, Kitty Fat or Cotton type 10 string, and brain lube in the bearing.
I prefer the flush fitting pads over the ones that sit out a bit because I found for me the ones that stick out get to be too snaggy.
---
### Author:  [@paxl13](https://forums.yoyoexpert.com/u/paxl13)
#### Post date: [July 12, 2019, 2:07pm UTC](https://forums.yoyoexpert.com/t/proper-0a-setup-for-yyf-confusion/305371/3 "2019-07-12T14:07:56Z")
I don’t have kitty fat but I’d be curious to try it out! That said, I should relube properly my YYF bearing… but to be fair it was getting unresponsive and I had all those bearing lying around for my Stummol8 tops that I never got around to clean up 🙂
The flush pad are interesting to know, I know the thick pad makes all sorts of noise with that setup but they are not too too snaggy at the moment ( but they are quite used too… so )
Thanks for the answer !!!
Go 0A go!!!
---
### Author:  [@AaronW](https://forums.yoyoexpert.com/u/AaronW)
#### Post date: [July 12, 2019, 2:18pm UTC](https://forums.yoyoexpert.com/t/proper-0a-setup-for-yyf-confusion/305371/4 "2019-07-12T14:18:47Z")
Just in case you missed it, we’ve got a dedicated thread to 0A here, once the internet allows us a way to transport physical things through the internet we’ll have punch and cake there 😃
> [@The 0A Thread (Fixed Axle & Modern Responsive)](https://forums.yoyoexpert.com/t/the-0a-thread-fixed-axle-modern-responsive/304228):
>
> I’ve been thinking a lot how we should have a dedicated 0A (fixed axle and modern responsive) thread. Especially since Bryan Figueroa and Ed Haponik came up with a 0A logo (yay! we’re official now!). [61533022\_2272668532815503\_4868927174249044630\_n] In the past we’ve had the [Wood Is Good](https://forums.yoyoexpert.com/t/wood-is-good/43367) thread, and recently the [When did responsive become popular again?](https://forums.yoyoexpert.com/t/when-did-responsive-become-popular-again/303604), along with a ton of smaller threads on the topic. It’d be nice to have one resource, one location, here where people can share videos, ask…
---
### Author:  [@paxl13](https://forums.yoyoexpert.com/u/paxl13)
#### Post date: [July 12, 2019, 2:30pm UTC](https://forums.yoyoexpert.com/t/proper-0a-setup-for-yyf-confusion/305371/5 "2019-07-12T14:30:29Z")
Thanks Aaron. I did miss it 🙂
Kind of just back into yoyo’ing due to 0A. So, I’ll continue my quest there 😛