# Proof-Of-Concept Yoyo Design

**URL:** <https://forums.yoyoexpert.com/t/proof-of-concept-yoyo-design/60165>\
**Category:** General Yo-Yo\
**Created:** [October 14, 2013, 8:11pm UTC](https://forums.yoyoexpert.com/t/proof-of-concept-yoyo-design/60165 "2013-10-14T20:11:12Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hendy](https://avatars.discourse-cdn.com/v4/letter/h/3bc359/32.png) [@Hendy](https://forums.yoyoexpert.com/u/Hendy)\
**Post date:** [October 14, 2013, 8:11pm UTC](https://forums.yoyoexpert.com/t/proof-of-concept-yoyo-design/60165/1 "2013-10-14T20:11:12Z")

</div>

I just got some new CAD software so I figured I’d mess around with some yoyo design for a bit. This is what I came up with after about 45 minutes. I didn’t really put any technical thought into it (specs and performance), but I think it looks kinda nice for a bit of knocking about.

![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/9/2/0/9209b219e0149f6a71639f2501811756171bcf6d.bmp)

---

<div class="post-metadata">

**Author:** ![Philip](https://avatars.discourse-cdn.com/v4/letter/p/96bed5/32.png) [@Philip](https://forums.yoyoexpert.com/u/Philip)\
**Post date:** [October 14, 2013, 8:20pm UTC](https://forums.yoyoexpert.com/t/proof-of-concept-yoyo-design/60165/2 "2013-10-14T20:20:25Z")

</div>

Needs a bearing. Actually, it looks pretty good. Are you going to materialize it ever

---

<div class="post-metadata">

**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\
**Post date:** [October 14, 2013, 9:14pm UTC](https://forums.yoyoexpert.com/t/proof-of-concept-yoyo-design/60165/3 "2013-10-14T21:14:13Z")

</div>

I can see it now:

The Henderson Yoyo Company

Has a really fancy name to it :wink:

---

<div class="post-metadata">

**Author:** ![Hendy](https://avatars.discourse-cdn.com/v4/letter/h/3bc359/32.png) [@Hendy](https://forums.yoyoexpert.com/u/Hendy)\
**Post date:** [October 14, 2013, 9:14pm UTC](https://forums.yoyoexpert.com/t/proof-of-concept-yoyo-design/60165/4 "2013-10-14T21:14:56Z")

</div>

> [@Philip](#):
>
> Needs a bearing. Actually, it looks pretty good. Are you going to materialize it ever

Yeah, I know. I just faked it for now until I tweak it to fit standard bearing/response/axle. I doubt I’ll materialize this exact design, but it’s definitely a proof of concept. Hopefully some day I’ll get something produced, that would be super cool.