# PGM Mod Questioning

**URL:** https://forums.yoyoexpert.com/t/pgm-mod-questioning/20486
**Category:** Yo-Yo Mods and Maintenance
**Created:** [October 30, 2010, 11:14pm UTC](https://forums.yoyoexpert.com/t/pgm-mod-questioning/20486 "2010-10-30T23:14:03Z")
**Posts on this page:** 9
**Page:** 1

<div class="post-metadata">

### Author: ![TheFerret2010](https://avatars.discourse-cdn.com/v4/letter/t/76d3ee/32.png) [@TheFerret2010](https://forums.yoyoexpert.com/u/TheFerret2010)
#### Post date: [October 30, 2010, 11:14pm UTC](https://forums.yoyoexpert.com/t/pgm-mod-questioning/20486/1 "2010-10-30T23:14:03Z")

</div>

Okay, so I want to remove the hubstacks on my pgm, and I’ve browsed the forums with no real luck on any idea of this. Only question is the specifications for the hex screw/nut and is it possible (I’m new to modding). Not sure on that. Want to remove the hubstacks, and make it non-hubstacked, replacement being a hex screw and matching nut. To be specific, I think I need to replace the hub that keeps both halves of the throw together, consider I have difficult putting it back together after I silicone’d it, along with numerous tangles. So yes, yet again, is it possible to replace with a specific bolt/nut, and any idea on specifications since I’ll most likely have to have a custom one made around where I live?

---

<div class="post-metadata">

### Author: ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)
#### Post date: [October 31, 2010, 12:42am UTC](https://forums.yoyoexpert.com/t/pgm-mod-questioning/20486/2 "2010-10-31T00:42:39Z")

</div>

Unscrew the yo-yo and remove the bearing. Take the half with the axle and tap the axle out with a hammer. Screw the axle into the non axle side and repeat. You can replace the those parts with an M4 bolt and nut that you can buy from a hardware store such as Ace.

---

<div class="post-metadata">

### Author: ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [October 31, 2010, 2:53am UTC](https://forums.yoyoexpert.com/t/pgm-mod-questioning/20486/3 "2010-10-31T02:53:18Z")

</div>

> [@chiekous](#):
>
> …I’ll most likely have to have a custom one made around where I live?

For the cost of having someone make you an M4 bolt/nut you can probably buy a new yoyo. Do like mrcnja says - Ace hardware (or whatever your local hardware store is).

---

<div class="post-metadata">

### Author: ![TheFerret2010](https://avatars.discourse-cdn.com/v4/letter/t/76d3ee/32.png) [@TheFerret2010](https://forums.yoyoexpert.com/u/TheFerret2010)
#### Post date: [October 31, 2010, 3:22am UTC](https://forums.yoyoexpert.com/t/pgm-mod-questioning/20486/4 "2010-10-31T03:22:45Z")

</div>

Okay, many thanks. Any chance someone could post a pic or message me a pic to give a general idea of what the bolt would look like? Not much of a hardware specialist unfortunately, though most likely will become one through yoyo’in,lol. Tried looking for one myself, but came across weaponry and general bolts/nuts.

---

<div class="post-metadata">

### Author: ![theyoster109](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/theyoster109/32/244_2.png) [@theyoster109](https://forums.yoyoexpert.com/u/theyoster109)
#### Post date: [October 31, 2010, 3:27am UTC](https://forums.yoyoexpert.com/t/pgm-mod-questioning/20486/5 "2010-10-31T03:27:35Z")

</div>

I use a Duncan Mosquito Axel in my PGM, because I lost the Hubstack post.

---

<div class="post-metadata">

### Author: ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [October 31, 2010, 3:49am UTC](https://forums.yoyoexpert.com/t/pgm-mod-questioning/20486/6 "2010-10-31T03:49:17Z")

</div>

> [@chiekous](#):
>
> Okay, many thanks. Any chance someone could post a pic or message me a pic to give a general idea of what the bolt would look like? Not much of a hardware specialist unfortunately, though most likely will become one through yoyo’in,lol. Tried looking for one myself, but came across weaponry and general bolts/nuts.

 ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/f/c/e/fce8315e92b3b22eb66943c8aece6f5ae84d68d4.jpeg)  
 ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/8/7/1/871e49bb02890cd8ea589a080b0bd9b385c7168a.jpeg)

---

<div class="post-metadata">

### Author: ![\_Dodge](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/_dodge/32/674_2.png) [@\_Dodge](https://forums.yoyoexpert.com/u/_Dodge)
#### Post date: [October 31, 2010, 7:15pm UTC](https://forums.yoyoexpert.com/t/pgm-mod-questioning/20486/7 "2010-10-31T19:15:44Z")

</div>

I took the the hub stacks off of my PGM and it play exactly the same. I go to pick it up sometimes and am sad I took them off.

---

<div class="post-metadata">

### Author: ![TheFerret2010](https://avatars.discourse-cdn.com/v4/letter/t/76d3ee/32.png) [@TheFerret2010](https://forums.yoyoexpert.com/u/TheFerret2010)
#### Post date: [October 31, 2010, 8:47pm UTC](https://forums.yoyoexpert.com/t/pgm-mod-questioning/20486/8 "2010-10-31T20:47:20Z")

</div>

Thanks, and I never really caught myself using the stacks to begin with, kind of wish I bought one without stacks, or even a different throw somewhat.

---

<div class="post-metadata">

### Author: ![j\_lowell9](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/j_lowell9/32/358_2.png) [@j\_lowell9](https://forums.yoyoexpert.com/u/j_lowell9)
#### Post date: [November 2, 2010, 2:41am UTC](https://forums.yoyoexpert.com/t/pgm-mod-questioning/20486/9 "2010-11-02T02:41:55Z")

</div>

I de-stacked my pgm and put the stacks on my hectic
