# Permatex 22074 Ultra Grey for very unresponsive return system

**URL:** <https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [May 5, 2023, 7:33am UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904 "2023-05-05T07:33:42Z")\
**Posts on this page:** 20\
**Page:** 6

<div class="post-metadata">

**Author:** ![bheinz63](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bheinz63/32/137310_2.png) [@bheinz63](https://forums.yoyoexpert.com/u/bheinz63)\
**Post date:** [May 16, 2023, 4:00pm UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/102 "2023-05-16T16:00:45Z")

</div>

Update: Tape method works great with Side Effect yoyos, does not work well with tapped axles and bearing posts lol. Struggled for 45 minutes to get a good stick/response cut until I said forget it and just did normal application lol

---

<div class="post-metadata">

**Author:** ![safetypin](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/safetypin/32/128453_2.png) [@safetypin](https://forums.yoyoexpert.com/u/safetypin)\
**Post date:** [May 16, 2023, 4:37pm UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/103 "2023-05-16T16:37:54Z")

</div>

I wonder if electrical tape would work for tapped axles since it’s stretchier.

I did an amazing job with the first yo-yo I tried with the grey silicon, and the. I did all the rest of my unresponsive, and about half of them look terrible. The ones I’ve tested worked, just looked terrible.

---

<div class="post-metadata">

**Author:** ![bheinz63](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bheinz63/32/137310_2.png) [@bheinz63](https://forums.yoyoexpert.com/u/bheinz63)\
**Post date:** [May 16, 2023, 4:42pm UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/104 "2023-05-16T16:42:50Z")

</div>

I was using packing tape which is old and not very sticky, maybe a different tape would work. I liked the clear cuz I can clearly see the area i need to cut, etape is often opaque

---

<div class="post-metadata">

**Author:** ![Big](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/big/32/81788_2.png) [@Big](https://forums.yoyoexpert.com/u/Big)\
**Post date:** [May 16, 2023, 5:53pm UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/105 "2023-05-16T17:53:29Z")

</div>

Just getting to this post and don’t have time to sift through every post so this may have been addressed already. How is the adhesion of the gray silicone? I have a g5+ that has a really shallow response area. Sadly i can find pads in the correct size. All of the silicones i have tried in the past tear out after a couple of hours of play. I have tried flowable, red, and blue and they all meet thee same fate.

---

<div class="post-metadata">

**Author:** ![GTDropKnot](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gtdropknot/32/212400_2.png) [@GTDropKnot](https://forums.yoyoexpert.com/u/GTDropKnot)\
**Post date:** [May 16, 2023, 7:47pm UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/106 "2023-05-16T19:47:56Z")

</div>

> [@mable](#):
>
> [ultra grey technical data sheet](https://www.permatex.com/wp-content/uploads/2023/04/82194.pdf)
> 
> [red rtv technical data sheet](https://www.permatex.com/wp-content/uploads/tds/81630.pdf)
> 
> [flowable data sheet](https://www.permatex.com/wp-content/uploads/tds/81730.pdf)

This might have the info you’re looking for but I don’t know what that stat is called technically. I will say I have been using the grey in 80g hades pictured close above for like a week and a half or something I don’t remember and it’s held up really well for me so far and hades is heavy so more force required to stop it than lighter yo-yos and I throw super hard like idk if that is the same as how well it adheres, but it’s a good sign?

---

<div class="post-metadata">

**Author:** ![GTDropKnot](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gtdropknot/32/212400_2.png) [@GTDropKnot](https://forums.yoyoexpert.com/u/GTDropKnot)\
**Post date:** [May 16, 2023, 8:18pm UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/107 "2023-05-16T20:18:46Z")

</div>

Oh yeah also I came here to ask a question but then I got distracted—does anyone else think that the grey snags less than other response types? I feel like I’ve noticed that bc it’s so unresponsive, it’s more likely for the yo-yos spin to just slow and die instead of snag when I mess up and overcrowd the gap. Like I feel like my other yo-yos without the grey snag instead of just like nerfing the spin more.

I don’t know if this is placebo or true or what. I’m not saying it doesn’t snag, like it’s related to rpm’s a lot too, but I feel like I’ve noticed this and I’m curious if anyone else that switched to the grey has noticed this.

---

<div class="post-metadata">

**Author:** ![IoSonoFormaggio](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/iosonoformaggio/32/263206_2.png) [@IoSonoFormaggio](https://forums.yoyoexpert.com/u/IoSonoFormaggio)\
**Post date:** [May 17, 2023, 12:13am UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/108 "2023-05-17T00:13:18Z")

</div>

It’s really good. Maybe a bit too good as I had a very hard time removing it from my yoyo the one time I did it. I never had to remove pads ever again since I can just top it off if it happens to get too worn out.

Even on a shallow groove I doubt it’ll have any adhesion issues.

---

<div class="post-metadata">

**Author:** ![IoSonoFormaggio](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/iosonoformaggio/32/263206_2.png) [@IoSonoFormaggio](https://forums.yoyoexpert.com/u/IoSonoFormaggio)\
**Post date:** [May 17, 2023, 12:17am UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/109 "2023-05-17T00:17:22Z")

</div>

This is precisely why I started using the grey, although I think the bigger factor is the fact that I recess my ultra grey quite a bit.

From my experience most pads are not really flush, and even extrude a little bit. This makes a huge difference in play. If it extrudes even one tenth of a mm from the response groove, it will inevitably cause more friction, killing spintimes and make it prone to snagging.

It’s the combination of a recessed response as well as the hardness of ultra grey that really makes it snag less.

---

<div class="post-metadata">

**Author:** ![bheinz63](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bheinz63/32/137310_2.png) [@bheinz63](https://forums.yoyoexpert.com/u/bheinz63)\
**Post date:** [May 17, 2023, 12:22am UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/110 "2023-05-17T00:22:23Z")

</div>

One of the first yoyos I Ultr Greyed was my Covenant because the pads stuck out a bit and caused more friction as well as snagging. Since a lightly recessed application of Ultra Grey its not snagging at all, and just spins forever. Actually changed the way I feel about the yoyo lol.

---

<div class="post-metadata">

**Author:** ![bigstupidbees](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bigstupidbees/32/210638_2.png) [@bigstupidbees](https://forums.yoyoexpert.com/u/bigstupidbees)\
**Post date:** [May 17, 2023, 1:02am UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/111 "2023-05-17T01:02:26Z")

</div>

I’ve noticed the same, just switching from regular flowable to the ultra grey I snag way less. I feel I have to be more deliberate with my binds but I actually think that has improved my technique. Sometimes I’ll throw a weak bind that would’ve worked with my old setup and it’ll slip and remind me to actually throw that loop in the gap. Binds feel great. I recessed all of mine about the same amount (credit card corner) and I am finding the response the best so far. I like doing things myself when possible so the application is no big deal. For me, its Ultra Grey \> Flowable \> Pads.

---

<div class="post-metadata">

**Author:** ![Yooo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yooo/32/196320_2.png) [@Yooo](https://forums.yoyoexpert.com/u/Yooo)\
**Post date:** [May 17, 2023, 1:08am UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/112 "2023-05-17T01:08:40Z")

</div>

I didn’t read all the comments, sorry if this was said. Is this grey stuff better than red gasket maker? I been planning to try the DIY pads very soon because Im tired of my pads falling out from the weak adhesive they use on some pre made ones.

---

<div class="post-metadata">

**Author:** ![james123213](https://avatars.discourse-cdn.com/v4/letter/j/df705f/32.png) [@james123213](https://forums.yoyoexpert.com/u/james123213)\
**Post date:** [May 17, 2023, 1:30am UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/113 "2023-05-17T01:30:31Z")

</div>

Way better and easier in my opinion

---

<div class="post-metadata">

**Author:** ![bigstupidbees](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bigstupidbees/32/210638_2.png) [@bigstupidbees](https://forums.yoyoexpert.com/u/bigstupidbees)\
**Post date:** [May 17, 2023, 1:43am UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/114 "2023-05-17T01:43:58Z")

</div>

I tried red and I was not a fan. Difficult to apply too.

---

<div class="post-metadata">

**Author:** ![safetypin](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/safetypin/32/128453_2.png) [@safetypin](https://forums.yoyoexpert.com/u/safetypin)\
**Post date:** [May 17, 2023, 11:38am UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/115 "2023-05-17T11:38:20Z")

</div>

I would say that ultra grey is not less difficult than the red RTV gasket maker. Maybe even a little more difficult in some ways. This actually relates to the adhesion issue, now that I think about it. With red gasket maker and flowable silicon, it was pretty easy to get the excess off. With ultra grey, i feel like i have to scrape & rub a bit more to get it off. So I think the adhesion is probably better.

I just got some bulk string, so I had the idea that I would take a bearing I don’t use much, and use it + a cheap string on each yoyo and just throw it for a bit to make sure I didn’t get any of the silicone in the bearing seat, and I figured the first string I used might rub off some silicone if I didn’t get all of it myself.

Also, I felt like a messy application might perform less well, but every yoyo I tried was at least a little less snaggy, and maybe required just a bit more string loop in the gap to bind.

---

<div class="post-metadata">

**Author:** ![bheinz63](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bheinz63/32/137310_2.png) [@bheinz63](https://forums.yoyoexpert.com/u/bheinz63)\
**Post date:** [May 17, 2023, 3:15pm UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/116 "2023-05-17T15:15:48Z")

</div>

Re-Ultra-Grey’d Deep State rips. Reasonably smooth surface, flush if not ever so slightly proud application and response is the same if not better than the Flow Groove pads. I personally prefer a reliable tug response than a snappy response and this is feeling perfect!

 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/9/2/9/9293661080f397f3e74034995dd4e94eb2fbbaf1.jpeg)

---

<div class="post-metadata">

**Author:** ![bheinz63](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bheinz63/32/137310_2.png) [@bheinz63](https://forums.yoyoexpert.com/u/bheinz63)\
**Post date:** [May 17, 2023, 10:18pm UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/117 "2023-05-17T22:18:03Z")

</div>

Crazy how much faster and less messy this is with a package with a nozzle instead of the tiny 0.5oz package with no nozzle

 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/7/9/0/7906939dbafa17de1f528c6b99cd84d25d910b47.jpeg)

---

<div class="post-metadata">

**Author:** ![Albertino](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/albertino/32/302953_2.png) [@Albertino](https://forums.yoyoexpert.com/u/Albertino)\
**Post date:** [May 18, 2023, 6:44am UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/118 "2023-05-18T06:44:24Z")

</div>

Bran, I love that you literally siliconing every yoyo you have ahahahah respect bro this stuff work so damn well!

---

<div class="post-metadata">

**Author:** ![bheinz63](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bheinz63/32/137310_2.png) [@bheinz63](https://forums.yoyoexpert.com/u/bheinz63)\
**Post date:** [May 18, 2023, 2:26pm UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/119 "2023-05-18T14:26:56Z")

</div>

I have become a HUGE fan of this stuff! Response is just perfect, I still have quite a few yos to silicone but eventually they’ll all be Ultra Grey’d lol.

I do have a tube of unopened clear flowable for my responsive yoyos just in case I dont like how the Deep State and Weekender play long term

---

<div class="post-metadata">

**Author:** ![safetypin](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/safetypin/32/128453_2.png) [@safetypin](https://forums.yoyoexpert.com/u/safetypin)\
**Post date:** [May 18, 2023, 2:37pm UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/120 "2023-05-18T14:37:35Z")

</div>

Wait… did you say you siliconed a Weekender? I thought that black one on the left looked like a Weekender, but I had discounted that as an option because the response channel was seemed too wide/shallow to hold silicone.

---

<div class="post-metadata">

**Author:** ![bheinz63](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bheinz63/32/137310_2.png) [@bheinz63](https://forums.yoyoexpert.com/u/bheinz63)\
**Post date:** [May 18, 2023, 8:56pm UTC](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904/121 "2023-05-18T20:56:28Z")

</div>

It was wide but I just filled it and smoothed it out, playing FANTASTIC so far! I do prefer more of a tug response but this feels relatively close to the core co pads so far

[Previous page](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904.md?page=5)

[Next page](https://forums.yoyoexpert.com/t/permatex-22074-ultra-grey-for-very-unresponsive-return-system/374904.md?page=7)
