# One Drop Bearings

**URL:** <https://forums.yoyoexpert.com/t/one-drop-bearings/67637>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [July 9, 2014, 6:16pm UTC](https://forums.yoyoexpert.com/t/one-drop-bearings/67637 "2014-07-09T18:16:19Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![maxpax02](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/maxpax02/32/1471_2.png) [@maxpax02](https://forums.yoyoexpert.com/u/maxpax02)\
**Post date:** [July 9, 2014, 6:16pm UTC](https://forums.yoyoexpert.com/t/one-drop-bearings/67637/1 "2014-07-09T18:16:19Z")

</div>

Hey I got a OD Rally last week and it is being responsive I have cleaned the bearing multiple times and it was still responsive. I bought a new bearing and after 20 min. it was responsive. Any suggestions what to do?! I cleaned the new bearing also.

---

<div class="post-metadata">

**Author:** ![hobbyman101](https://avatars.discourse-cdn.com/v4/letter/h/eada6e/32.png) [@hobbyman101](https://forums.yoyoexpert.com/u/hobbyman101)\
**Post date:** [July 9, 2014, 6:35pm UTC](https://forums.yoyoexpert.com/t/one-drop-bearings/67637/2 "2014-07-09T18:35:54Z")

</div>

Did you check the pads?

---

<div class="post-metadata">

**Author:** ![maxpax02](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/maxpax02/32/1471_2.png) [@maxpax02](https://forums.yoyoexpert.com/u/maxpax02)\
**Post date:** [July 9, 2014, 8:15pm UTC](https://forums.yoyoexpert.com/t/one-drop-bearings/67637/3 "2014-07-09T20:15:26Z")

</div>

> [@hobbyman101](#):
>
> Did you check the pads?

how do I do that?

---

<div class="post-metadata">

**Author:** ![DrAwesome](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/drawesome/32/1139_2.png) [@DrAwesome](https://forums.yoyoexpert.com/u/DrAwesome)\
**Post date:** [July 9, 2014, 8:25pm UTC](https://forums.yoyoexpert.com/t/one-drop-bearings/67637/4 "2014-07-09T20:25:47Z")

</div>

Run your finger around the response pads and make sure that they are placed all the way into the groove

---

<div class="post-metadata">

**Author:** ![maxpax02](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/maxpax02/32/1471_2.png) [@maxpax02](https://forums.yoyoexpert.com/u/maxpax02)\
**Post date:** [July 9, 2014, 9:39pm UTC](https://forums.yoyoexpert.com/t/one-drop-bearings/67637/5 "2014-07-09T21:39:52Z")

</div>

> [@DrAwesome](#):
>
> Run your finger around the response pads and make sure that they are placed all the way into the groove

thanks I’ll try it out! 🙂

---

<div class="post-metadata">

**Author:** ![maxpax02](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/maxpax02/32/1471_2.png) [@maxpax02](https://forums.yoyoexpert.com/u/maxpax02)\
**Post date:** [July 10, 2014, 2:29am UTC](https://forums.yoyoexpert.com/t/one-drop-bearings/67637/6 "2014-07-10T02:29:41Z")

</div>

What if that doesn’t work?

---

<div class="post-metadata">

**Author:** ![rizki\_yoist](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rizki_yoist/32/7925_2.png) [@rizki\_yoist](https://forums.yoyoexpert.com/u/rizki_yoist)\
**Post date:** [July 12, 2014, 6:03am UTC](https://forums.yoyoexpert.com/t/one-drop-bearings/67637/7 "2014-07-12T06:03:09Z")

</div>

What did you use to clean the bearing? Do you lube it? most likely it’s either bad/dirty cleaning agent or you overlubed.  
Personally I don’t use lube mostly at all.