# One Drop 555 Pads **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [March 14, 2013, 3:39pm UTC](https://forums.yoyoexpert.com/t/one-drop-555-pads/50799 "2013-03-14T15:39:44Z")\ **Posts on this page:** 1\ **Showing post:** 9
**Author:** ![Isaac](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/isaac/32/597931_2.png) [@Isaac](https://forums.yoyoexpert.com/u/Isaac)\ **Post date:** [April 17, 2021, 8:44pm UTC](https://forums.yoyoexpert.com/t/one-drop-555-pads/50799/9 "2021-04-17T20:44:00Z")
SG stickers won’t fit, they’re meant for the 19mm “slim” CBC pad size that has kind of become the standard for size C bearings. Duncan Friction Stickers are meant for small bearings as far as I’m aware so I think their inner diameter might not fit properly. I was going to suggest 555 diff pads (not sure on thickness, they come in 0.15" and 0.30") ~~but they seem to be out of stock.~~ they were out of stock last I checked but seem to have some now. There are General Yo pads in stock in the 555 size, but I’m not sure how thick they are / how they’d fit in the M1. the Hat pads might also work but I’m not sure about that: > **[General-Yo Response Pads](https://shop.yoyoexpert.com/products/general-yo-yoyo-response-pads?variant=18870652164)** > > These are replacement response pads for both your General-Yo yo-yos and other brands.General-Yo uses a special aerospace silicone that lasts much longer than standard silicone, and the binds are spot on.Choose your size from the traditional 555 size... You could try making your own “baz/chaz pads” with some plastidip and naptha: > [@Creating BAZ/CHAZPADS for older throws](https://forums.yoyoexpert.com/t/creating-baz-chazpads-for-older-throws/335985): > > I started looking on here for the bazpad/chazpad guide since I always found them to perform a lot better than old style dif pads. You’ll notice on older throws like anti-yo that they don’t fit your standard 18mm pad and instead took thin sticker pads. This is the guide copied from another forums old post that “IV” had made. I couldn’t find it on here so wanted to have it here in case someone else needed help with making some decent pads for their old throws. Of note is that plastidip before it … If I could find a way to consistently cut pads to the 555 size (without, yknow, using scissors for individual pads) like via a custom punch or something, I’d consider making a bunch and offering them up at cost. --- _[View the full topic](https://forums.yoyoexpert.com/t/one-drop-555-pads/50799)._