# One Drop 54 responsive please help

**URL:** https://forums.yoyoexpert.com/t/one-drop-54-responsive-please-help/30126
**Category:** Yo-Yo Mods and Maintenance
**Created:** [September 23, 2011, 11:28pm UTC](https://forums.yoyoexpert.com/t/one-drop-54-responsive-please-help/30126 "2011-09-23T23:28:24Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![Fonglol](https://avatars.discourse-cdn.com/v4/letter/f/57b2e6/32.png) [@Fonglol](https://forums.yoyoexpert.com/u/Fonglol)
#### Post date: [September 23, 2011, 11:28pm UTC](https://forums.yoyoexpert.com/t/one-drop-54-responsive-please-help/30126/1 "2011-09-23T23:28:24Z")

</div>

Just got the one drop 54 and it is responsive can anyone recommend any pads that can fix this

---

<div class="post-metadata">

### Author: ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)
#### Post date: [September 23, 2011, 11:37pm UTC](https://forums.yoyoexpert.com/t/one-drop-54-responsive-please-help/30126/2 "2011-09-23T23:37:06Z")

</div>

Patience.

Just play it more. Long sleepers are good. I think some people like to do gyro flops(I can’t do those yet), but you need to break in the bearing. Well, that and break in the response pads too.

I got a mint Relic Code 1 from BST, and I’m still breaking in the bearing, but that’s because I don’t throw it much because I don’t want to ding it up, even playing over carpet.

Pretty much every other yoyo I’ve bought I’ve had to do the same thing: break in the bearing and response pad. It takes some time. Look at it as an excuse to throw more. That can’t be a bad thing now, can it?

---

<div class="post-metadata">

### Author: ![Fonglol](https://avatars.discourse-cdn.com/v4/letter/f/57b2e6/32.png) [@Fonglol](https://forums.yoyoexpert.com/u/Fonglol)
#### Post date: [September 23, 2011, 11:39pm UTC](https://forums.yoyoexpert.com/t/one-drop-54-responsive-please-help/30126/3 "2011-09-23T23:39:39Z")

</div>

Yea I think I just need to throw it more. Thanks

---

<div class="post-metadata">

### Author: ![nicholi2789](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nicholi2789/32/885_2.png) [@nicholi2789](https://forums.yoyoexpert.com/u/nicholi2789)
#### Post date: [September 26, 2011, 9:33am UTC](https://forums.yoyoexpert.com/t/one-drop-54-responsive-please-help/30126/4 "2011-09-26T09:33:23Z")

</div>

Just keep playing with it til it breaks in a little and if its still responsive after a few hours, clean the bearing and don’t lube it. Should be dead unresponsive then. Both my 54s came completely unresponsive. It could be that they just put a little too much lube in that particular bearing in the shop.

---

<div class="post-metadata">

### Author: ![mls5stokes](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mls5stokes/32/681_2.png) [@mls5stokes](https://forums.yoyoexpert.com/u/mls5stokes)
#### Post date: [September 28, 2011, 5:12am UTC](https://forums.yoyoexpert.com/t/one-drop-54-responsive-please-help/30126/5 "2011-09-28T05:12:48Z")

</div>

After I Silicone my throws and if they tend to be grabby, I take some denim jeans and rub it on the response for about 30 secs on each side and it makes it less responsive. Or, like stated patience and more throwing.
