# Olympic Yo-Yo (vintage) - New string too loose

**URL:** <https://forums.yoyoexpert.com/t/olympic-yo-yo-vintage-new-string-too-loose/349725>\
**Category:** General Yo-Yo\
**Created:** [December 31, 2021, 3:54am UTC](https://forums.yoyoexpert.com/t/olympic-yo-yo-vintage-new-string-too-loose/349725 "2021-12-31T03:54:40Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![logidelic](https://avatars.discourse-cdn.com/v4/letter/l/4bbf92/32.png) [@logidelic](https://forums.yoyoexpert.com/u/logidelic)\
**Post date:** [December 31, 2021, 3:54am UTC](https://forums.yoyoexpert.com/t/olympic-yo-yo-vintage-new-string-too-loose/349725/1 "2021-12-31T03:54:40Z")

</div>

I tried to restring an old wooden Olympic Yo-Yo with some new strings that work fine on other Yo-Yo’s. However, for the Olympic, the string is too loose around the axel; I can’t even wind the thing up (and if I can it just falls and stays down).

Are the axels of old Yo-Yos much thinner than new ones? Any way I can make it work?

---

<div class="post-metadata">

**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\
**Post date:** [December 31, 2021, 3:57am UTC](https://forums.yoyoexpert.com/t/olympic-yo-yo-vintage-new-string-too-loose/349725/2 "2021-12-31T03:57:19Z")

</div>

It could well be the string. Some older wooden yoyos work best with something like type 8 cotton string.

Those were made in Sweden by Kalmar Trissan. There is nothing unusual about the design. The axle appears to be a little thicker than those on Tom Kuhn or BC yoyos.

---

<div class="post-metadata">

**Author:** ![kevinm](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kevinm/32/697_2.png) [@kevinm](https://forums.yoyoexpert.com/u/kevinm)\
**Post date:** [December 31, 2021, 4:16am UTC](https://forums.yoyoexpert.com/t/olympic-yo-yo-vintage-new-string-too-loose/349725/3 "2021-12-31T04:16:10Z")

</div>

Keep making the string tension tighter until it finally gets responsive, after a few sleepers the string may get a little more cooperative and you can start adjusting it to a more neutral tension.

---

<div class="post-metadata">

**Author:** ![TheThrowingGnome](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/thethrowinggnome/32/14231_2.png) [@TheThrowingGnome](https://forums.yoyoexpert.com/u/TheThrowingGnome)\
**Post date:** [December 31, 2021, 4:39am UTC](https://forums.yoyoexpert.com/t/olympic-yo-yo-vintage-new-string-too-loose/349725/4 "2021-12-31T04:39:54Z")

</div>

Pinch the string just above the yoyo and spin the yoyo clockwise to tighten the string on the axle. Then throw some hard sleepers until it responds right.

---

<div class="post-metadata">

**Author:** ![adamantiumpops](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/adamantiumpops/32/198285_2.png) [@adamantiumpops](https://forums.yoyoexpert.com/u/adamantiumpops)\
**Post date:** [December 31, 2021, 2:45pm UTC](https://forums.yoyoexpert.com/t/olympic-yo-yo-vintage-new-string-too-loose/349725/5 "2021-12-31T14:45:06Z")

</div>

The Gnome gave me this advice a couple months ago and I’ve used it to revisit the response on 4 or 5 different fixies. It is a solid method and I will use it forever.

---

<div class="post-metadata">

**Author:** ![logidelic](https://avatars.discourse-cdn.com/v4/letter/l/4bbf92/32.png) [@logidelic](https://forums.yoyoexpert.com/u/logidelic)\
**Post date:** [January 2, 2022, 1:59pm UTC](https://forums.yoyoexpert.com/t/olympic-yo-yo-vintage-new-string-too-loose/349725/6 "2022-01-02T13:59:17Z")

</div>

Worked! Thank you so much to all! What a great, helpful community.
