# Old Coca Cola

**URL:** <https://forums.yoyoexpert.com/t/old-coca-cola/22044>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [December 21, 2010, 11:53am UTC](https://forums.yoyoexpert.com/t/old-coca-cola/22044 "2010-12-21T11:53:50Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![YoYoAUS](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoaus/32/640_2.png) [@YoYoAUS](https://forums.yoyoexpert.com/u/YoYoAUS)\
**Post date:** [December 21, 2010, 11:53am UTC](https://forums.yoyoexpert.com/t/old-coca-cola/22044/1 "2010-12-21T11:53:50Z")

</div>

As the subject suggests i have and old coca cola yoyo which was broken so i drilled out the old axle and and picked out all the wood. Then i used a spare FHZ axle and spacers to make it accept an A size bearing. It now plays very smooth but not responsive enough. So i am asking what response should i put in it? Please note i cannot use my lath to cut a recess for o rings becouse it just dosnt stay stable whatever i do.

Could the friction stickers from a FHZ work? becouse ive got a couple of them.  
I am hoping to post pictures when im done.

Thanks, Luke

---

<div class="post-metadata">

**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\
**Post date:** [December 21, 2010, 4:03pm UTC](https://forums.yoyoexpert.com/t/old-coca-cola/22044/2 "2010-12-21T16:03:14Z")

</div>

Just slap some pad in there and you will be good to go.

---

<div class="post-metadata">

**Author:** ![YoYoAUS](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoaus/32/640_2.png) [@YoYoAUS](https://forums.yoyoexpert.com/u/YoYoAUS)\
**Post date:** [December 22, 2010, 12:24am UTC](https://forums.yoyoexpert.com/t/old-coca-cola/22044/3 "2010-12-22T00:24:02Z")

</div>

Yes I know put i need some sort of pad that will last very long becouse i will have to glue the coca cola caps on over the axle. So i need some pad that is long lasting so it will be a while before i need to pry the coca cola caps off to undo the axle to replace it.

So I need to know what is a good long lasting looping pad to install??

---

<div class="post-metadata">

**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\
**Post date:** [December 22, 2010, 12:36am UTC](https://forums.yoyoexpert.com/t/old-coca-cola/22044/4 "2010-12-22T00:36:42Z")

</div>

Duncan silicone stickers will last as long as you.&nbsp; :wink:

> **[Duncan Response](https://shop.yoyoexpert.com/products/duncan-silicone-groove-sg-yoyo-stickers?variant=41206787997886)**
>
> This is replacement response for your silicone groove Duncan yo-yos like the new Raptor and Duncan's future aluminum yo-yo releases.The 19mm pads are also compatible with any yo-yos that use the CBC Slim Pad Size 19mm OD.Not sure if it will fit? Feel...

---

<div class="post-metadata">

**Author:** ![YoYoAUS](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoaus/32/640_2.png) [@YoYoAUS](https://forums.yoyoexpert.com/u/YoYoAUS)\
**Post date:** [December 22, 2010, 7:37am UTC](https://forums.yoyoexpert.com/t/old-coca-cola/22044/5 "2010-12-22T07:37:13Z")

</div>

But it says you have to replace them once a month. ☹

---

<div class="post-metadata">

**Author:** ![YoYoAUS](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoaus/32/640_2.png) [@YoYoAUS](https://forums.yoyoexpert.com/u/YoYoAUS)\
**Post date:** [December 22, 2010, 10:23pm UTC](https://forums.yoyoexpert.com/t/old-coca-cola/22044/6 "2010-12-22T22:23:27Z")

</div>

are there any other ones?? Are Kentaro stickers good??

---

<div class="post-metadata">

**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\
**Post date:** [December 23, 2010, 1:50am UTC](https://forums.yoyoexpert.com/t/old-coca-cola/22044/7 "2010-12-23T01:50:42Z")

</div>

> [@YoYoAUS](#):
>
> But it says you have to replace them once a month. ☹

That is referring to the original duncan friction stickers that are on the same page. I put the silicone stickers in my G&E 4 almost a year ago and they’re still good. I play it quite frequently.

> [@](#):
>
> Friction Stickers are a must have for your Duncan yo-yo. Without them your yo-yo will not return to your hand or throw correctly. Depending on play these may need to be changed as much as one to two times per month.

---

<div class="post-metadata">

**Author:** ![YoYoAUS](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoaus/32/640_2.png) [@YoYoAUS](https://forums.yoyoexpert.com/u/YoYoAUS)\
**Post date:** [December 23, 2010, 2:05am UTC](https://forums.yoyoexpert.com/t/old-coca-cola/22044/8 "2010-12-23T02:05:30Z")

</div>

KK thanks jhb. 🙂

---

<div class="post-metadata">

**Author:** ![TomYo](https://avatars.discourse-cdn.com/v4/letter/t/9de053/32.png) [@TomYo](https://forums.yoyoexpert.com/u/TomYo)\
**Post date:** [December 26, 2010, 10:06pm UTC](https://forums.yoyoexpert.com/t/old-coca-cola/22044/9 "2010-12-26T22:06:57Z")

</div>

If you still need help, I love Chaz Pads, they last forever!
