# O-rings for hubstacks

**URL:** <https://forums.yoyoexpert.com/t/o-rings-for-hubstacks/26207>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [May 10, 2011, 12:43am UTC](https://forums.yoyoexpert.com/t/o-rings-for-hubstacks/26207 "2011-05-10T00:43:06Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Aldo8250](https://avatars.discourse-cdn.com/v4/letter/a/d6d6ee/32.png) [@Aldo8250](https://forums.yoyoexpert.com/u/Aldo8250)\
**Post date:** [May 10, 2011, 12:43am UTC](https://forums.yoyoexpert.com/t/o-rings-for-hubstacks/26207/1 "2011-05-10T00:43:06Z")

</div>

I know it’s kinda noobish but how do you put the o-rings on the posts over the bearings?

---

<div class="post-metadata">

**Author:** ![skeletonboy333](https://avatars.discourse-cdn.com/v4/letter/s/b2d939/32.png) [@skeletonboy333](https://forums.yoyoexpert.com/u/skeletonboy333)\
**Post date:** [May 10, 2011, 1:23am UTC](https://forums.yoyoexpert.com/t/o-rings-for-hubstacks/26207/2 "2011-05-10T01:23:53Z")

</div>

You just slip the O-Ring on the axle piece. It’ll make a snug fit. Use some pressure.

---

<div class="post-metadata">

**Author:** ![Aldo8250](https://avatars.discourse-cdn.com/v4/letter/a/d6d6ee/32.png) [@Aldo8250](https://forums.yoyoexpert.com/u/Aldo8250)\
**Post date:** [May 10, 2011, 3:54am UTC](https://forums.yoyoexpert.com/t/o-rings-for-hubstacks/26207/3 "2011-05-10T03:54:27Z")

</div>

doesnt it go over the hub stack?

---

<div class="post-metadata">

**Author:** ![skeletonboy333](https://avatars.discourse-cdn.com/v4/letter/s/b2d939/32.png) [@skeletonboy333](https://forums.yoyoexpert.com/u/skeletonboy333)\
**Post date:** [May 10, 2011, 4:15am UTC](https://forums.yoyoexpert.com/t/o-rings-for-hubstacks/26207/4 "2011-05-10T04:15:33Z")

</div>

??? You put the bearing on and then you slip the O-Ring on top and snap the cap on.