# Nozzle

**URL:** <https://forums.yoyoexpert.com/t/nozzle/17763>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [August 9, 2010, 10:56pm UTC](https://forums.yoyoexpert.com/t/nozzle/17763 "2010-08-09T22:56:11Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![climber](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/climber/32/433_2.png) [@climber](https://forums.yoyoexpert.com/u/climber)\
**Post date:** [August 9, 2010, 10:56pm UTC](https://forums.yoyoexpert.com/t/nozzle/17763/1 "2010-08-09T22:56:11Z")

</div>

When you use Permatex® High-Temp Red RTV Silicone Gasket how do you get it out of the nozzle

---

<div class="post-metadata">

**Author:** ![hubstack](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hubstack/32/7912_2.png) [@hubstack](https://forums.yoyoexpert.com/u/hubstack)\
**Post date:** [August 9, 2010, 11:44pm UTC](https://forums.yoyoexpert.com/t/nozzle/17763/2 "2010-08-09T23:44:10Z")

</div>

u have to cut a hole in the tip

---

<div class="post-metadata">

**Author:** ![climber](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/climber/32/433_2.png) [@climber](https://forums.yoyoexpert.com/u/climber)\
**Post date:** [August 10, 2010, 12:09am UTC](https://forums.yoyoexpert.com/t/nozzle/17763/3 "2010-08-10T00:09:46Z")

</div>

I ment after you you squite it out and it’s still in the nozzle

---

<div class="post-metadata">

**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\
**Post date:** [August 10, 2010, 3:33am UTC](https://forums.yoyoexpert.com/t/nozzle/17763/4 "2010-08-10T03:33:06Z")

</div>

What I do is squirt some out of the end of the nozzle. Just enough to grab. Now let it dry. Next time you need it just pull out what you let dry and use. now repeat.

---

<div class="post-metadata">

**Author:** ![mista8eight8](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mista8eight8/32/559_2.png) [@mista8eight8](https://forums.yoyoexpert.com/u/mista8eight8)\
**Post date:** [August 10, 2010, 3:59pm UTC](https://forums.yoyoexpert.com/t/nozzle/17763/5 "2010-08-10T15:59:29Z")

</div>

> [@climber](#):
>
> When you use Permatex® High-Temp Red RTV Silicone Gasket how do you get it out of the nozzle

I use a syringe, I usually dry up the nozzle

---

<div class="post-metadata">

**Author:** ![Yo\_Yo\_Ma\_X](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yo_yo_ma_x/32/187_2.png) [@Yo\_Yo\_Ma\_X](https://forums.yoyoexpert.com/u/Yo_Yo_Ma_X)\
**Post date:** [August 13, 2010, 4:11am UTC](https://forums.yoyoexpert.com/t/nozzle/17763/6 "2010-08-13T04:11:01Z")

</div>

people ask this a lot and the thing is that what ever is in the nozzle gets stuck in there. just let it dry and then take it out. that is why it is better to silicone your yoyos in bulk