# Non wanted binds

**URL:** <https://forums.yoyoexpert.com/t/non-wanted-binds/330469>\
**Category:** General Yo-Yo\
**Created:** [November 28, 2020, 12:19am UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469 "2020-11-28T00:19:18Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![Levi1](https://avatars.discourse-cdn.com/v4/letter/l/c77e96/32.png) [@Levi1](https://forums.yoyoexpert.com/u/Levi1)\
**Post date:** [November 28, 2020, 12:19am UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469/1 "2020-11-28T00:19:18Z")

</div>

my steel shutter is binding whenever I hop out of a green triangle. any tips?

---

<div class="post-metadata">

**Author:** ![HappyHands](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/happyhands/32/93016_2.png) [@HappyHands](https://forums.yoyoexpert.com/u/HappyHands)\
**Post date:** [November 28, 2020, 12:45am UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469/2 "2020-11-28T00:45:16Z")

</div>

Hello Levi, welcome along.

On a basic analysis- too much lube maybe, clean and run dry bearing.  
Hope you find your answer 🙌

---

<div class="post-metadata">

**Author:** ![yoyoben](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoben/32/141955_2.png) [@yoyoben](https://forums.yoyoexpert.com/u/yoyoben)\
**Post date:** [November 28, 2020, 12:58am UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469/3 "2020-11-28T00:58:22Z")

</div>

try keeping tension on the string when you exit, some GTs are super touchy.

---

<div class="post-metadata">

**Author:** ![Hanker](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hanker/32/628221_2.png) [@Hanker](https://forums.yoyoexpert.com/u/Hanker)\
**Post date:** [November 28, 2020, 12:59am UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469/4 "2020-11-28T00:59:50Z")

</div>

Try using thinner string?  
The gap width of it is 3.61mm which is much smaller than most full sized yoyos. Kitty Normal would be good. I play a lot of small yoyos and always use Kitty Normal or their size equivalent. Thicker string would rub against the pad and cause the yoyo to bind.

How does it play btw?

---

<div class="post-metadata">

**Author:** ![JSERR](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jserr/32/186876_2.png) [@JSERR](https://forums.yoyoexpert.com/u/JSERR)\
**Post date:** [November 28, 2020, 2:16am UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469/5 "2020-11-28T02:16:16Z")

</div>

Might be too much lube in the bearing. Might just be the response. The only yo-yo I have that gives me the same issue is my kuntosh. It doesn’t like green triangles. If I end up in one I have to be sure my string tension is tight. Any bit of slack when I throw it out will bind it.

---

<div class="post-metadata">

**Author:** ![Levi1](https://avatars.discourse-cdn.com/v4/letter/l/c77e96/32.png) [@Levi1](https://forums.yoyoexpert.com/u/Levi1)\
**Post date:** [November 28, 2020, 7:11am UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469/6 "2020-11-28T07:11:19Z")

</div>

thanks I will try thinner string. it plays pretty smooth, the weight feels quite concentrated as it is full stainless steel. It hurts a lot when it hits your hand though. hope that helped.

---

<div class="post-metadata">

**Author:** ![Levi1](https://avatars.discourse-cdn.com/v4/letter/l/c77e96/32.png) [@Levi1](https://forums.yoyoexpert.com/u/Levi1)\
**Post date:** [November 28, 2020, 7:13am UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469/7 "2020-11-28T07:13:36Z")

</div>

yes, I don’t have to much experience lubing bearings so I might of over lubed it. also I haven’t always had this problem so that would probably be it. thanks

---

<div class="post-metadata">

**Author:** ![Levi1](https://avatars.discourse-cdn.com/v4/letter/l/c77e96/32.png) [@Levi1](https://forums.yoyoexpert.com/u/Levi1)\
**Post date:** [November 28, 2020, 7:14am UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469/8 "2020-11-28T07:14:22Z")

</div>

Thanks, will try that.

---

<div class="post-metadata">

**Author:** ![Levi1](https://avatars.discourse-cdn.com/v4/letter/l/c77e96/32.png) [@Levi1](https://forums.yoyoexpert.com/u/Levi1)\
**Post date:** [November 28, 2020, 7:15am UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469/9 "2020-11-28T07:15:57Z")

</div>

yes, that might work, will try it. thanks

---

<div class="post-metadata">

**Author:** ![Myk\_Myk](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/myk_myk/32/63087_2.png) [@Myk\_Myk](https://forums.yoyoexpert.com/u/Myk_Myk)\
**Post date:** [November 28, 2020, 5:48pm UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469/10 "2020-11-28T17:48:23Z")

</div>

> [@yoyoben](#):
>
> try keeping tension on the string when you exit, some GTs are super touchy.

Once you determine it is in fact totally unresponsive; lube, string, and such, I think this is great advice. Remember the intention is for the Steel Shutter to hone your skills. The A bearing and inherent smaller gap, are part of the design to foster clean play.

---

<div class="post-metadata">

**Author:** ![Levi1](https://avatars.discourse-cdn.com/v4/letter/l/c77e96/32.png) [@Levi1](https://forums.yoyoexpert.com/u/Levi1)\
**Post date:** [November 28, 2020, 8:06pm UTC](https://forums.yoyoexpert.com/t/non-wanted-binds/330469/11 "2020-11-28T20:06:44Z")

</div>

yes, that is good advice as my GTs are definitely not perfect. thanks
